Hírfolyam
David Kranich
akarja ezt
akarja ezt
Diorama Base: 'Wintergewitter' - Operation Winter Storm WW II Stalingrad-Series
RT-Diorama 1:35
35302K (35202) 2021 Új eszköz 2 November, 08:58
Kalle Kindel
új fotóalbumot adott hozzá.
új fotóalbumot adott hozzá.
9 25 July 2023, 19:20
Skyhiker
Were the kit's wings really that far off or are you making something special?
Were the kit's wings really that far off or are you making something special?
9 October, 08:44
Kalle Kindel
I already had everything together when I got a tip from the britmodeller forum that the kit wing is in the wrong place. I studied the drawings and photos and even though I don't like to modify ready made things, I still moved the wing back based on this information
I already had everything together when I got a tip from the britmodeller forum that the kit wing is in the wrong place. I studied the drawings and photos and even though I don't like to modify ready made things, I still moved the wing back based on this information
9 October, 11:16
Kesa Tiho
Kust selle said, kuna kõikides mudeli/hobi poodides tallinnas ma ei ole leidnud ühtegi "mach" firmalt toodet, kas tellisid siis kuskilt välismaalt? millest ma näen see tundub nagu väga huvitav ehitis, et tahaks ühe endale kaa
Kust selle said, kuna kõikides mudeli/hobi poodides tallinnas ma ei ole leidnud ühtegi "mach" firmalt toodet, kas tellisid siis kuskilt välismaalt? millest ma näen see tundub nagu väga huvitav ehitis, et tahaks ühe endale kaa
9 October, 14:02
David Kranich
akarja ezt
akarja ezt
Diorama Base: 'Grudinin Mill Stalingrad' WW II Stalingrad-Series
RT-Diorama 1:35
35304K (35304) 2021 Új eszköz 2 November, 08:58
ave-cesar
megszerezte ezt
megszerezte ezt
Les Dewoitine Et le virtuose Marcel Doret
Le fana de l'aviation hors série avions de légende No. 66
Michel Bénichou
2021 2 November, 08:56
ave-cesar
megszerezte ezt
megszerezte ezt
Mitsubishi "Zero" Terreur du Pacifique
Le fana de l'aviation hors série avions de légende No. 64
Bernard Baëza
2019 2 November, 08:56
ave-cesar
megszerezte ezt
megszerezte ezt
F-4 Phantom II Le maître du ciel au Viêtnam
Le fana de l'aviation hors série avions de légende No. 67
René J. Francillon, Frédéric Marsaly
2021 2 November, 08:56
ave-cesar
megszerezte ezt
megszerezte ezt
P-38 "Lightning" La tornade de feu
Le fana de l'aviation hors série avions de légende No. 63
Alain Pelletier
2019 2 November, 08:56
ave-cesar
megszerezte ezt
megszerezte ezt
Hurricane Une icône racontée par ses pilotes
Le fana de l'aviation hors série avions de légende No. 70
Hangar 47
2022 2 November, 08:55
ave-cesar
megszerezte ezt
megszerezte ezt
Hellcat le roi du Pacifique
Le fana de l'aviation hors série avions de légende No. 69
Alain Pelletier
2022 2 November, 08:55
ave-cesar
megszerezte ezt
megszerezte ezt
Curtiss P-40 Un tigre au combat
Le fana de l'aviation hors série avions de légende No. 65
Alain Pelletier
2020 2 November, 08:55
Juergen Klinglhuber
új fotóalbumot adott hozzá.
új fotóalbumot adott hozzá.
41 képek
Eurofighter Typhoon - "Austrian Typhoons" 7L*WB - DONEÚj: 2 November, 08:54 1:72
Projekt: #J7 Eurofighter Typhoon
51 31 May, 15:31
Juergen Klinglhuber
Looking forward to visit "Airpower24" tomorrow. This reminded me that I have taken some pictures the last weeks that did not yet find the way into the album. So here we go.
Looking forward to visit "Airpower24" tomorrow. This reminded me that I have taken some pictures the last weeks that did not yet find the way into the album. So here we go.
6 September, 19:53
Juergen Klinglhuber
Hello everyone - thanks for your intereest. I must admit that this is not a very exiting build, but thanks for yor interest - will to the painting this weekend and I just checked the decal sheet,....uuuii, there are plenty tiny stickers to be placed.
Hello everyone - thanks for your intereest. I must admit that this is not a very exiting build, but thanks for yor interest - will to the painting this weekend and I just checked the decal sheet,....uuuii, there are plenty tiny stickers to be placed.
15 September, 08:28
★ Starfish ★
Super Arbeit soweit! der Airpower19 Eurofighter ist nicht ganz so spannend wie die letzten beiden "Tiger" aber trotzdem nice to have 🙂
Super Arbeit soweit! der Airpower19 Eurofighter ist nicht ganz so spannend wie die letzten beiden "Tiger" aber trotzdem nice to have 🙂
29 September, 19:36
Skyhiker
I had trouble with the front landing gear on this kit breaking. I don't know if was just a fluke or if the mold is too thin. It may need reinforcement.
I had trouble with the front landing gear on this kit breaking. I don't know if was just a fluke or if the mold is too thin. It may need reinforcement.
29 September, 19:42
Juergen Klinglhuber
@ Starfish -thx for your comment. I have the Nato Tiger from '22 on the bench as well. Eurofighter Typhoon - "Austrian Tigers" 7L*WC | Album by jott (1:72)
And you are right - the more colourful livery is way more interessting (application of decals 🙂 - but also to look at it when done). I will up-date the other Album soon.
@ Starfish -thx for your comment. I have the Nato Tiger from '22 on the bench as well. Eurofighter Typhoon - "Austrian Tigers" 7L*WC | Album by jott (1:72)
And you are right - the more colourful livery is way more interessting (application of decals 🙂 - but also to look at it when done). I will up-date the other Album soon.
30 September, 06:52
Juergen Klinglhuber
@ Skyhiker
I am building 2 of those revel kits in parallel - both front landing gears broke already right after taking it from the sprue.... so thx for your advice, I hope other mates receive this info to take precaution.
@ Skyhiker
I am building 2 of those revel kits in parallel - both front landing gears broke already right after taking it from the sprue.... so thx for your advice, I hope other mates receive this info to take precaution.
30 September, 06:55
Harry Eder
Nice job Juergen! 👍 I'm looking forward to see your Eurofighters live at Euromodell Ried!
Nice job Juergen! 👍 I'm looking forward to see your Eurofighters live at Euromodell Ried!
2 October, 09:37
Juergen Klinglhuber
Hallo Raphael, Harry & Alec - welcome and thx for leaving your comments. @Harry - I guess the 2 Typhoons will be ready just in time. Looking forward to meet you there.
Hallo Raphael, Harry & Alec - welcome and thx for leaving your comments. @Harry - I guess the 2 Typhoons will be ready just in time. Looking forward to meet you there.
3 October, 10:59
Juergen Klinglhuber
So far so good - final pictures soon after the model show in Ried this coming week end.
So far so good - final pictures soon after the model show in Ried this coming week end.
16 October, 18:15
Harry Eder
Great job (on both)! 👍 I'm looking forward to see them live on saturday! 😉
Great job (on both)! 👍 I'm looking forward to see them live on saturday! 😉
17 October, 11:51
Juergen Klinglhuber
Thank you Starfish, Guy and Lukasz. Thx Harry - see you tomorrow.
Thank you Starfish, Guy and Lukasz. Thx Harry - see you tomorrow.
18 October, 04:38
bughunter
Great looking model - and finished just in time for the show 👍 See you tomorrow!
Great looking model - and finished just in time for the show 👍 See you tomorrow!
18 October, 15:31
bughunter
új fotóalbumot adott hozzá.
új fotóalbumot adott hozzá.
4 képek
WIP of a blue-yellow biplane1:48
I like the result after painting much more then the kit seats
Projekt: Stearman PT-17 Kaydet
13 31 October, 18:27
bughunter
Welcome Robert! Which one you want to take, the yellow or a green one? 😉
Please do not miss the project description, for the _VERY_ important reason for this project!
Welcome Robert! Which one you want to take, the yellow or a green one? 😉
Please do not miss the project description, for the _VERY_ important reason for this project!
31 October, 18:55
Ludvík Kružík
I'll sit down too. If I'm not mistaken, one green seat is still open. 😉
I'll sit down too. If I'm not mistaken, one green seat is still open. 😉
31 October, 22:40
bughunter
Hello my friends! A warm welcome to each and every one of you!
Working on the parts of this kit can be considered bodily harm! The bright yellow hurts your eyes and you can't see any details or damaged areas that need work. I would have preferred a more common gray!
Hello my friends! A warm welcome to each and every one of you!
Working on the parts of this kit can be considered bodily harm! The bright yellow hurts your eyes and you can't see any details or damaged areas that need work. I would have preferred a more common gray!
1 November, 16:49
Kenneth
Hallo Frank, the set with lap belts only could be intended for the US Navy variant of the Stearman, the N2S. Until US entry in WW2, US Navy aircraft mostly did not have shoulder belts. I read this in a review of a 1/32 Vought Kingfisher while looking for seatbelts and wondering about the same thing for my 1/32 Revell/ICM N2S Stearman kit.
Hallo Frank, the set with lap belts only could be intended for the US Navy variant of the Stearman, the N2S. Until US entry in WW2, US Navy aircraft mostly did not have shoulder belts. I read this in a review of a 1/32 Vought Kingfisher while looking for seatbelts and wondering about the same thing for my 1/32 Revell/ICM N2S Stearman kit.
2 November, 08:55
Sarah-Jane
megszerezte ezt
megszerezte ezt
1 November, 13:28
Sarah-Jane
Unfortunately Fujimi don't include the front spotlights or the wheels seen on the box picture, I'll have to see about getting them form somewhere
Unfortunately Fujimi don't include the front spotlights or the wheels seen on the box picture, I'll have to see about getting them form somewhere
1 November, 17:38
Sarah-Jane
Fujimi have basically just done the Cup car with 5 spoke wheels, strangely you do get non chrome and chrome versions of them, with the different decals, bit of a let down, but hopefully I can source the parts from somewhere.
Fujimi have basically just done the Cup car with 5 spoke wheels, strangely you do get non chrome and chrome versions of them, with the different decals, bit of a let down, but hopefully I can source the parts from somewhere.
1 November, 18:42
CasModeler
spotmodel.com/advanc..d=89&scales_id=9
You can also try to make a ball with tamiya epoxy putty quick type, grind the bottom to fit the mask and then somehow insert part of the lamp into this "ball".
spotmodel.com/advanc..d=89&scales_id=9
You can also try to make a ball with tamiya epoxy putty quick type, grind the bottom to fit the mask and then somehow insert part of the lamp into this "ball".
2 November, 04:58
Sarah-Jane
Many thanks for that, very much apprecated, they look like they'll work, thank you
Many thanks for that, very much apprecated, they look like they'll work, thank you
2 November, 08:53
/hu/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=hu
35
35
/hu/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo