Hírfolyam

Alec K
Very nice! Practice for the Eduard release I presume 😉 😄

Michael Kohl
Looking sharp.

Maciej Bellos
Niiice!

Jakub Fiala
Thank you, mates!
Alec, correct deduction 👍 I see that you are not only a great modeler, but also an experienced detective 😄
Just to clarify, I will not build the new edition in 1:72 scale, but the 1:48 kit, which I have had in my stash for some time.

Nicolas
Great start.👍

Mr D
Nice metal finish 👌.
Glad you showed paints,
I'm struggling to find a good white paint that doesn't need a stupid amount of coats to look white... Any recommendations from anyone be appreciated.
Smart Mustang scheme 👍

Jakub Fiala
Thank you Nicolas and Mr D!
to Mr D: I use Tamiya LP and Gunze H aplied in several thin layers.

Mr D
Thanks 👍 for the tip, will look into it now.
Cheers Jakub.

CaptGPF
I agree with Jakob, Tamiya LP white is much easier for me to use. Another trick is to black base the part first, and then lightly coat on the white. For some odd reason, it's easier for me to avoid over-spraying white on that.

Jakub Fiala
Black base is certainly a good tip 👍

Clement
Mr Surfacer 1500 White is also a good option if you need a white "paint" with high coverage.
You can polish it afterwards or layer a coat of regular white paint if need be.
Being 1500, it's pretty smooth anyway.
Great mustang, Jakub. I'm looking forward to see it done 🙂

Bas Tonn
Love that yellow nose !!

Moreno Baruffini
Well, since I'm also building a p-51 (different molds), I can only say that I have still to learn and practice a lot 🙂

Guy Rump
Looking great, following. 👍

Jakub Fiala
Thank you, gentlemen!

Marek Nagy
Máš to pěkný.

Jakub Fiala
Dík, Máro! V pondělí ho dotáhnu na klub. Stojím před velkým dilematem a budu potřebovat hromadnou konzultaci 😄

Juergen Klinglhuber
Great result sp far.... - 👍 👍

Jakub Fiala
Thank you, Juergen!

bughunter
Always impressed by your clean paint jobs 👍

Jakub Fiala
Thanks a lot, Bughunter! Happy, you like it.

Lukas Muller
zatím krásná práce... jen tak dál 👍

Jakub Fiala
Dikec....snad to nezmrvim 😄

Sergej I
Great looking little bird! What did you coat over the alclads with? If anything?

Jakub Fiala
Thank you, Sergej!
There is no coat over any color. The silver color on wings (LP-11) is polished, Alclads are untouched. I hope no varnish is needed. But i will see after decals....

Sergej I
Thank you for the answer... brave, hoping all goes well and looking forward for results 👍

Jakub Fiala
Thanks.
Decals on.

Alec K
…and they look great 👍

Zbynek Honzik
This looks more like 1/48th scale than 1/72nd scale. Really cool! 👍

J35J
Very clean paintjob! Looking forward to see the final result👍🏻

Jakub Fiala
Thanks a lot, mates!

Patrick Hagelstein
The decals do look stunning! Did you encounter any issues with setting solutions on the bare NMF parts?

Jakub Fiala
Thank you, Patrick. Luckily, no problem occurred with the setting solutions. But the decals are not fully set in panel lines yet. Photos are taken immediately after applying the decals. It is not visible on pictures, but there is still a lot of work to do.

Juergen Klinglhuber
Like the paint job. Very accurate & clean - 👍

Jakub Fiala
Thank you, Juergen!
Some weathering done. Final completion is near 😄

bughunter
Another masterpiece is emerging 👍

Alec K
Agreed!

Jakub Fiala
Thanks a lot, mates!

Jarda Malý
no co Ti budu lhát, máš to zase parádní. prostě umíš.

J35J
Great build and paintwork!👍🏻

Vincent
Great Metal finish!!

Neuling
Yes!

Jakub Fiala
Thank you, gentlemen!
I´ve uploaded first pictures of a finished model. I hope, i will be able to present the whole gallery soon.

Jakub Fiala
Jardo díkec! Úplně se červenám 😄

bughunter
Wonderful result! Looking forward for the final pictures.

Alec K
This turned out excellent. Looks like a much large scale model 👍

Moreno Baruffini
Simply perfect!

Maciej Bellos
Oh wow! Fantastic Mustang!

Jakub Fiala
Thanks a lot, mates, for your kind comments!
Finally i uploaded a set of photos of finished model.

Guy Rump
Great result, congrats! 👍

Neuling
Top build and presentation!

bughunter
Nice pictures of a great model 👍

Spanjaard
wow, fantastic job. Alclad still looks fantastic after all the decals, detal setting weathering etc, simply perfect. and no clear varnish, amazing.

Patrick Hagelstein
I totally agree with Spanjaard! The finish looks immaculate! Good to know that Alclad can withstand a beating.

Jakub Fiala
Thank you very much, mates! I'm really happy, that you like it. Of course, the quality of this kit is not the same as the new Arma hobby or Eduard kits, but finally, it looks like a Mustang 🙂
To Spanjaard and Patrick: yes, Alclads are very good. But be careful, not all Alclads are the same. For example polished aluminium or airframe aluminium ( which i used for external tanks) are not resistant to weathering agents and need to be varnished! I also had to overspray decals on the fuselage with Tamiya LP- 24 semi gloss clear, because thare were visible edges of decals. But that's not a problem of alclad, it's a problem of decals.

Nicolas
Congrats, great result.

Spanjaard
thanks a lot for the info Jakub, I was wondering what I did wrong in my own P-51.... I guess my only error was to use airframe aluminium in most of the airplane 😄 😄
well, I believe it was my first use of Alclad 😉

Jarda Malý
borec!

Jakub Fiala
Oh, that was really a bad luck, Spanjaard 🙂
Děkuji, děkuji Jaroušku 🙂

Patrick Hagelstein
Thank you for the detailed explanation, Jakub! Very good to know! 👍🏼

Martin Oostrom
I've got a sister kit, so definitely watching

Goldman
The 3D printed parts look very nice. High quality prints. Did you design them yourself? What printer did you use?

Bozzer
I concur with Goldman, those parts look good. I'll hop on to this build, because I'm interested to see where you take it?

Mikhail Petrenko
Thanks guys! I use Anycubic Photon Mono M5S. The 3d-model is a modified model from a computer game ETS. I modified it in Blender program.

Bozzer
That's interesting. I have the Anycubic Photon Mono 4K, but I'm finding my build plate, small. I truthfully found Blender, far too much for me. I've messed around with a few similar tools, but I'm definitely no good at CAD. Really, I need to get into something more childish, and work my way up? I can build a house, from the ground up, but computer software, is still a minefield for me.
I applaud your skills mate, you definitely have another talent 👍

scalemates
I can rename existing topics if that helps?
If you think a new topic should be created = go for it 🙂

Stuart T
That would be a great start if you could edit the following, thanks so much

Holden FX <change to> Holden Gen.1 (48-215/FJ/FX)
Holden FC <change to> Holden Gen.2 (FE/FC/FB/EK)
Holden EK <change to> Holden Gen.3 (EJ/EH/HD/HR)
Holden HK <change to> Holden Gen.4 (HK/HT/HG)
Holden HJ Panel Van <change to> Holden Gen.5 (HQ/HJ/HX/HZ/WB)
Holden Torana <change to> Holden Torana Gen.1 (HB)
Holden Torana LC/LJ <change to> Holden Torana Gen.2 (LC/LJ/TA)
Holden Torana LH/LX <change to> Holden Torana Gen.3 (LH/LX/UC)
Ford Australia Falcon <change to> Ford Australia Falcon Gen.1 (XK/XL/XM/XP)
Ford Australia Falcon (Second) <change to> Ford Australia Falcon Gen.2 (XR/XT/XW/XY)
Ford Australia Falcon (Third) <change to> Ford Australia Falcon Gen.3 (XA/XB/XC)
Ford Australia Falcon GT <change to> Ford Australia Falcon Gen.4 (XD/XE/XF)

scalemates
Can we remove the list of versions (FE/FC/FB/EK) and include the years they were produced?

See example for Toyota Celica
Toyota Celica (1970-1977)
Toyota Celica (1981-1985)

Stuart T
sure... have made the changes as below. Thank you.

Holden FX <change to> Holden Gen.1 (1948-1956)
Holden FC <change to> Holden Gen.2 (1956-1962)
Holden EK <change to> Holden Gen.3 (1962-1968)
Holden HK <change to> Holden Gen.4 (1968-1971)
Holden HJ Panel Van <change to> Holden Gen.5 (1971-1985)
Holden Torana <change to> Holden Torana Gen.1 (1967-1969)
Holden Torana LC/LJ <change to> Holden Torana Gen.2 (1969-1975)
Holden Torana LH/LX <change to> Holden Torana Gen.3 (1975-1980)
Ford Australia Falcon <change to> Ford Australia Falcon Gen.1 (1960-1966)
Ford Australia Falcon (Second) <change to> Ford Australia Falcon Gen.2 (1966-1972)
Ford Australia Falcon (Third) <change to> Ford Australia Falcon Gen.3 (1972-1979)
Ford Australia Falcon GT <change to> Ford Australia Falcon Gen.4 (1979-1988)

Stuart T
Hi there... just wanted check back in on this. Cheers

scalemates
thx! this is done

Gerald
Hello Welcome here 🙂

Brushguy
Hi and thank you, Gerald. 🙂