Hírfolyam
Metallic Details 1:48
Brian Cavetakarja ezt
U.S. 75mm Pack Howitzer M1A1 & Carriage M8
Riich.Models 1:35
RV35001 2024 Új alkatrészek Több téma (1!!)13 November, 03:46
babak chalangiúj fotóalbumot adott hozzá.
14 29 October, 18:36
babak chalangi3d designing and replacing the air filter of the tamiya kit with correct storage compartment of iranian chieftain
29 October, 18:50
babak chalangiSo far so good
I finished scratch building some key parts or used left over parts from other kits and modified them enough to fit the conversion from Mk.3 to Iranian Mk.5
The MRS, infrared detector, radio box on the side of the turret had to be added
The 3d printed parts are also now fully installed on the turret and the wiring for the head lights are finished
Also using candy wrapping paper I made a gun mantlet cover since the kit was laking
1 November, 00:35
Snake PlisskenWhat a unique variant, a Chieftain in Iranian service. Are reference materials difficult to find for these tanks or do you have access to a museum tank? Thanks for sharing your build! 😎
1 November, 02:34
babak chalangiThank you, I have access to a damaged chieftain in a museum but if you want to build an iranian chieftain without the hustle go for takom they have an iranian chieftain in 1/35
1 November, 08:56
Villiers de VosThe textured look was very nicely captured. It looks good under paint.
13 November, 03:43
Cristian Aúj fotóalbumot adott hozzá.
32 képek
Zvezda Su-30SM "Flanker-H" build log
1:72
Decals done, gloss varnish coat applied.
Projekt: Sukhoi Su-30SM Flanker-H
5+ 43 8 September, 21:20
Cristian AWelcome Sergej. Cuajete and Lukasz!
The kit is very nice and I love the decals, they show exactly the 43 blue in my photo posted here. So far I've found a small fitting issue to the front, but if you start slowly and work your way towards the wings it gets into place.
11 September, 07:05
Robin (WhiteGlint)Great looking engines! Your diorama is also shaping up nicely.
The little patch of green really breaks up all the dark colours from the aircraft and the apron as well. 👀 👍
4 November, 08:43
Cristian AThank you Robin! Glad you like it! I also think the green patch adds a nice contrast to balance out all those darker tones 👍 😊 it took me one week to mask and paint the engines, now they are barely visible between
the vertical stabilizers 😄
4 November, 19:38
Anthony lfkúj fotóalbumot adott hozzá.
14 5 March, 10:35
Anthony lfkThanks Gorby, my photo skill is better than the build. My poor eyesight is not helping either. I only saw the mistakes after viewing the high-resolution photos, lol. So I recently bought myself a ring led with a magnifying glass inside the ring. Hopes this will help with my next build.
10 March, 07:53
Spanjaardbeautiful corsair. do not blow things out of proportion 😉 any build would show flaws whenyou see it through zoomed high resolution pictures. this corsair looks amazing from where I stand 🙂
10 March, 08:05
![1:48 F-16CJ [Block 50] Fighting Falcon (Tamiya 61098)](/products/img/6/4/1/102641-10000-t180.jpg)
Cristian Aúj fotóalbumot adott hozzá.
30 5 July, 19:12
Anthony lfkúj fotóalbumot adott hozzá.
12 12 November, 03:42
Anthony lfkCristian, the kit was a fast built, fittings on par with tamiya. Fantastic details for 1/72 ! Highly recommended.
13 November, 01:41
gvizbiúj fotóalbumot adott hozzá.
27 3 May 2022, 17:06
John HughesI've had my eye on a few of these eary war Gecko British tanks, but never got around to getting one as the company is a bit of an unknown to me. Have you found it a good kit to build? The results are certainly impressive!
22 May 2022, 14:36
gvizbiThank you, guys.
This was my first Gecko kit, and I can say that I am absolutely impressed! One of the best kits I have ever built. Dragon's kits are the most similar, but the instructions are much better (no errors at least) and maybe a bit better engineering. The only issue with this kit was the exhaust, which was unnecessarily complex (it took me 25% of the time to assemble the damn exhaust 🙂
Also, I see that some reviews are complaining about the tracks, but except for being a bit time-consuming, I didn't have any issues with them. And they look fantastic.
Overall, strongly recommended. At least this kit 🙂
30 May 2022, 12:17
David TaylorJust got my Scimitar 2 looks well detailed and thought out.If it turns out as good as your cruiser I will be chuffed.
30 May 2022, 15:03
F MatthewsLooks fantastic! Like you, I found the tracks to be fine. A lot of work, sure, but they look great and are workable. I've built three full sets (A10 and two A9s) and still here. Your camo looks perfect.
13 November, 02:36
Villiers de VosVery nice work, especially the restrained weathering came out top notch.
13 November, 03:32
Andrew ForsterTerrible 3d printing. Not cured properly. All jammed in so you can't trim them without wrecking the wheel. Very muddy printing.
Better to take the rubber wheels and rims and resin cast your own. I would never buy from this company again.Their attention to detail and quality is no where near todays standards. BOOOH!!
13 November, 03:29
Villiers de Vosúj fotóalbumot adott hozzá.
27 képek
1936 Mercedes 540K Maharaja Sport Roadster
1:16
After some tedious masking, using the reference photo as a guide the upper body was painted with Tamiya Black X-1 and th...
23 20 October, 09:57
Villiers de VosThe kit shows its age. I hope, with a bit of work will turnout alright.
20 October, 17:00
Mr DWill be keeping eye out for updates.
The messy glue tubes, the Beriev lm building came with a little pot of glue that you Peirce with pin on one side 🤣
Long dried up.... I did use it back when l was a kid....lots of sticky thumb prints.
Nice project 👍
23 October, 18:23
Villiers de VosGentlemen, thank you all for your kind remarks. I have been chipping away slowly. The part count of the kit is not that high, but the version I chose as well as the paint scheme results in a lot of challenges to my skill level which I thoroughly enjoy.
6 November, 18:55
Mr DHi Villiers 👋
Your doing a good job...it looking really good 👍
Nice kit... who is the manufacturer??
6 November, 21:14
Mr D👍 Thanks Villiers ...l like to look different manufacturers up n see there range 👍
7 November, 13:53
Mr DHeading towards being a nice model this one, like the engine and interior work.
Good little kit 👌👍
8 November, 16:59
Villiers de VosThank you Mr. D for your comments. The kit certainly shows its age. I remain a sucker for the larger scale classic cars.
12 November, 03:02
rlpnfhakarja ezt
Junkers Ju 290 A-5 Seeadler - Internal + External Details (for Revell)
Extratech 1:72
EX 72151 2004 Új eszköz 13 November, 03:26
Lance Osbornemegszerezte ezt
A Gulf War Eyewitness Report Military Photo File
Warmachines No. 8 | 626
Frederick W. Swanson, Willy Peeters, Francois...
1991 13 November, 03:24
Dave Burgesshozzáadott egy új projektet.
5 20 September, 02:48
Dave BurgessBird #2 in the Thunderbirds series. I'm having *REAL* fun with these decal sheets. Most of the kits (T-33, F-100D, F-105, F-4, T38) were produced by Hasegawa in the mid-'70s to mid '80s, and the decal sheets have deteriorated badly. They've dried out, and become VERY brittle. I've had to buy decal sheets on EBay, and they too are in rough shape. I ended up by brush painting Testors gloss lacquer over the decals to keep them from shattering when they're dipped in water. I first tried airbrushing the lacquer on, but I found I needed a thicker coat. I'm working through the kits now, and dealing with the decal issues as I come across them.
12 November, 02:45
Dave BurgessMinor error n this one. Didn't realize, until it was too late, that the tail surfaces had to be painted white before the red scallops & stars were applied. One of the problems with the various decal mfgs. Some of the sheets also provide the white, others don't By the time I realized, I'd already applied a bunch of decals, and was beyond the turning point. I addressed this problem on the F-100 and F-105, but I'll just have to live with my mistake on the T-33.
13 November, 00:54
Dave BurgessAnother problem cropped up during the build. The kit-provided decal sheet was incomplete. They provided no decals for the drop tanks, instead indicating they had to be painted, but no stencil for that. Having built his one before, I knew the first one I built DID provide decals, so I found Microscale sheet #72-133 on EBay and purchased it. I had perviously purchase this sheet about 3 decades ago, and built all 3 versions (T-Birds, Blue Angels and Golden Knights). Unfortunately this decal sheet also suffered from deterioration, forcing me to touch up a couple of the red scallops. I've now purchased THREE Microscale T-Birds decal sheets in the past 6 weeks (T-33, T-38 F-100) that have splintered when wet. After the first one, I started carefully testing unused decals on the sheet, before applying them. The best fix I found was to brush paint over the decals with Testors clear lacquer (a spray coat was too thin).
13 November, 01:22
Ben MMy solution has been to scan the old sheets and if they shatter/are too much of a hassle, I print new ones via sts decals. I recently purchased some decal paper for my printer and next time I'll try making my own. I have cut out simple ones from scans with my cricut to make masks to paint the markings, another option.
13 November, 03:22
Jim Hawksworthakarja ezt
A-10A Thunderbolt II Close Air Support Attack Aircraft
Great Wall Hobby (GWH) 1:48
L4825 2024 Új alkatrészek 13 November, 03:22
Lance Osbornemegszerezte ezt
M2 / M3 Bradley Infantry Fighting Vehicle / Cavalry Fighting Vehicle | Milit...
Warmachines No. 5 | 580
François Verlinden, Willy Peeters, Patrick J....
1991 13 November, 03:22
Jim Hawksworthakarja ezt
A-10A Thunderbolt II Close Air Support Attack Aircraft
Great Wall Hobby (GWH) 1:48
L4825 2024 Új alkatrészek 13 November, 03:21
Lance Osbornemegszerezte ezt
Israeli Defense Force Tiran 4 (T-54), Tiran 5 (T-55), Tiran 6 (T-62) | Military Ph...
Warmachines No. 10 | 669
Michael Mass
1991 13 November, 03:20
Marek Zadnikúj fotóalbumot adott hozzá.
10 27 December 2023, 17:24
Landlubber MikeThose aftermarket rockers look really nice. I might have to get one for my kit.
12 November, 21:55
Zsolt Czegleúj fotóalbumot adott hozzá.
105 29 July 2023, 13:57
Zsolt CzegleWelcome mates on the aboard!
The assembly phase is done, still some stowage are waiting to be mounted....
30 July 2023, 15:18
Zsolt CzegleYes I did Łukasz. Now this is going to be a simple project without any complications
4 August 2023, 10:23
Bruce HuxtableSubtle work, Zsolt. Superb at this scale. Learning lots from your builds 👍🙂
7 August 2023, 15:03
Zsolt CzegleI started to paint the details : tools, stowage, tow cable, wheels...
7 August 2023, 17:46
Zsolt CzegleDespite the hot weather, I'm back at the workbench: I made some streaking effects with weathering pencils.
24 August 2023, 15:25
Zsolt CzegleThank you Finn and Guy Rump!
It's still 90% completed. I hope I can finish next week.
25 August 2023, 19:12
Simon NagorsnikA lovely Sherman 😁
The color combination goes hand in hand and looks very harmonious.
Another master piece!
4 September 2023, 19:34
TH SCALE MODELS (Thomas Haberl)Somehow missed that you also received some awards on Nitra Model Show. Congrats! Gratuliere recht herzlich! See you in a few weeks then 👍👏
12 November, 08:03
/hu/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=hu
35
35
/hu/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo