Hírfolyam
Neuling
új fotóalbumot adott hozzá.
új fotóalbumot adott hozzá.
77 1 November 2018, 16:52
Holger Kranich
Absolute nice scene! Well done! 👍 But what happened to the rotorhead? Got too hot in the desert?😉
Absolute nice scene! Well done! 👍 But what happened to the rotorhead? Got too hot in the desert?😉
2 November 2018, 06:07
Neuling
Gentlemen, thank you for your interest in my diorama and your appreciation! Holger, I built this one in 1999, so I don´t remember the whereabout of the rotorhead and the temperatures. I was naive and trusted in the brand name of the kit manufacturer MRC (Model Rectifier Corporation). Help me: Where should the rotorhead be placed and how does it look like?
Gentlemen, thank you for your interest in my diorama and your appreciation! Holger, I built this one in 1999, so I don´t remember the whereabout of the rotorhead and the temperatures. I was naive and trusted in the brand name of the kit manufacturer MRC (Model Rectifier Corporation). Help me: Where should the rotorhead be placed and how does it look like?
2 November 2018, 14:34
Holger Kranich
Moin! Gerade auf Bild 19 fällt die Ausrichtung des gesamten Rotors auf. Der müßte eigentlich kerzengerade sein und nicht nach vorn und hinten runterhängen. Daher mein Spaß mit der Hitze.😉
Moin! Gerade auf Bild 19 fällt die Ausrichtung des gesamten Rotors auf. Der müßte eigentlich kerzengerade sein und nicht nach vorn und hinten runterhängen. Daher mein Spaß mit der Hitze.😉
2 November 2018, 14:41
Neuling
Vielen Dank, Holger. Die Bauanleitung schrieb vor, die Rotoren in "a drooping way" zu montieren. Referenzbilder hatte ich damals nicht, im Netz war ich noch nicht unterwegs, so daß ich des Guten zuviel getan habe. Deine Bilder zeigen ein deutlich geringeres "Durchhängen" der Rotorblätter. Da gehe ich nochmals ran ans Modell! Ein Bauteil habe ich aber nicht verschlampt, oder?
Vielen Dank, Holger. Die Bauanleitung schrieb vor, die Rotoren in "a drooping way" zu montieren. Referenzbilder hatte ich damals nicht, im Netz war ich noch nicht unterwegs, so daß ich des Guten zuviel getan habe. Deine Bilder zeigen ein deutlich geringeres "Durchhängen" der Rotorblätter. Da gehe ich nochmals ran ans Modell! Ein Bauteil habe ich aber nicht verschlampt, oder?
2 November 2018, 14:59
Andreas Koziol
@neuling hast du das damals geairbrusht oder nur mit dem pinsel gearbeitet?
@neuling hast du das damals geairbrusht oder nur mit dem pinsel gearbeitet?
2 November 2018, 22:54
Neuling
Danke Daniel und Holger! Andreas, ich verwende bei den Fahrzeugen und Flugzeugen Tamiya-Farbspraydosen und arbeite dann mit Pinsel und Tupfer noch etwas nach.
Danke Daniel und Holger! Andreas, ich verwende bei den Fahrzeugen und Flugzeugen Tamiya-Farbspraydosen und arbeite dann mit Pinsel und Tupfer noch etwas nach.
3 November 2018, 10:22
Saeed Ezadi
Nice Cobra Neuling. Always pleasure to see Cobra's specially with desrt scheme
Nice Cobra Neuling. Always pleasure to see Cobra's specially with desrt scheme
6 November 2018, 06:24
Neuling
Andy, Saeed and Michael, thank you for your interest in my diorama and your appreciation!
Andy, Saeed and Michael, thank you for your interest in my diorama and your appreciation!
6 November 2018, 16:10
Neuling
Not a new build, just better pictures with my new camera. - And I readjusted the rotor blades according to Holgers proposal.
Not a new build, just better pictures with my new camera. - And I readjusted the rotor blades according to Holgers proposal.
28 October 2022, 12:26
Jean-Michel Tilquin
Maybe not a new build, but still eye-catching. Looks like your new camera is working fine, Neuling!
Maybe not a new build, but still eye-catching. Looks like your new camera is working fine, Neuling!
28 October 2022, 14:21
Hanno Kleinecke
The fact that this build is already over 20 years old, makes the very high skill level even more obvious !
Another super dense atmospheric dio off the bench of Neuling- Works 👍
The fact that this build is already over 20 years old, makes the very high skill level even more obvious !
Another super dense atmospheric dio off the bench of Neuling- Works 👍
28 October 2022, 15:52
gorby
That looks great Neuling.
Amazing to think you've been producing such excellent quality for so long.
That looks great Neuling.
Amazing to think you've been producing such excellent quality for so long.
28 October 2022, 16:00
John
Very cool! I have the MRC AH-1W kit in the stash. Tempted to start it now, but for certain I will pay attention to the rotor head placement!
Very cool! I have the MRC AH-1W kit in the stash. Tempted to start it now, but for certain I will pay attention to the rotor head placement!
28 October 2022, 17:02
Mathias Decommere
Wauw! This one is amazing! I love the activity, composition and subject in this one. And the paintjob is offcourse superb. I always enjoy your work Neuling!
Wauw! This one is amazing! I love the activity, composition and subject in this one. And the paintjob is offcourse superb. I always enjoy your work Neuling!
29 October 2022, 05:50
Neuling
Thanks a lot mates! Much appreciated! - Jean-Michel, my old Panasonic was good, but my new Sony is better indeed (and admittedly I´ve learned about diorama photography here on scalemates). - John, the rotor head of the kit is okay, the drooping rotors were my own mistake.
Thanks a lot mates! Much appreciated! - Jean-Michel, my old Panasonic was good, but my new Sony is better indeed (and admittedly I´ve learned about diorama photography here on scalemates). - John, the rotor head of the kit is okay, the drooping rotors were my own mistake.
29 October 2022, 09:29
Jv
I showed one of my friends some pics of one of your builds
He said wtf I thought it was real
You always surprise whed your level of detail
I showed one of my friends some pics of one of your builds
He said wtf I thought it was real
You always surprise whed your level of detail
15 November 2022, 18:52
Olivier
The system needed 1 days to bring this 'new' wonder to my attention. I am happy I can enjoy it now.
The system needed 1 days to bring this 'new' wonder to my attention. I am happy I can enjoy it now.
17 November 2022, 11:05
Mr James
Not only are your builds stunning. Its your photography that sets you apart . Your use of lighting, shadows and the realistic POV angels is an enviable talent.
Not only are your builds stunning. Its your photography that sets you apart . Your use of lighting, shadows and the realistic POV angels is an enviable talent.
23 May 2023, 22:50
Shar Dipree
Hi Neuling. Another WOW from me. Great idea, something completely different. great implemented.
Hi Neuling. Another WOW from me. Great idea, something completely different. great implemented.
28 May 2023, 11:28
Bruce Huxtable
új fotóalbumot adott hozzá.
új fotóalbumot adott hozzá.
26 képek
Me 262 B-1Új: 30 June, 09:04 1:72
Starting to take shape....bare plastic and some filler, and now primer too, so far.
Projekt: Me 262 B-1a/U1
4 23 June, 15:50
Bruce Huxtable
Welcome, Nicolas. This kit has raised panel lines, and I have no idea how they will enhance or detract... Some might re-scribe, but I'm going to work with it, as is.
Welcome, Nicolas. This kit has raised panel lines, and I have no idea how they will enhance or detract... Some might re-scribe, but I'm going to work with it, as is.
23 June, 18:01
hiveloc
új fotóalbumot adott hozzá.
új fotóalbumot adott hozzá.
31 15 March, 18:24
André Silva
Outstanding job on the fuel lines. I made them a few times but now I use aftermarket ones, yours are perfect.
Outstanding job on the fuel lines. I made them a few times but now I use aftermarket ones, yours are perfect.
3 April, 21:29
hiveloc
Thanks André! Lots of bending and testing as you know. I'm getting myself ready for the slat armor construction, and will definitely go with your tip of making a jig. I've been following YOUR T-62 build, and your anti-radiation cladding on the turret is awesome!
Thanks André! Lots of bending and testing as you know. I'm getting myself ready for the slat armor construction, and will definitely go with your tip of making a jig. I've been following YOUR T-62 build, and your anti-radiation cladding on the turret is awesome!
3 April, 22:34
André Silva
Thank you hiveloc. I'm now (with a pinch of salt) placing the turret slat armor supports. When it's done (hopefuly correctly), i'll share their detailed placement locations by lenght and height, so anyone trying the same build won't have the same trial, error and elbow grease experience. Also following your build.
Thank you hiveloc. I'm now (with a pinch of salt) placing the turret slat armor supports. When it's done (hopefuly correctly), i'll share their detailed placement locations by lenght and height, so anyone trying the same build won't have the same trial, error and elbow grease experience. Also following your build.
4 April, 15:00
hiveloc
The turret slat mounting is going to the top of my NOT FUN list! I had a sheet of paper full of measurements and helpful tips from @André Silva, but I still ended up spending too much time testing and fitting everything in place. An unfortunate tip-over during construction had me re-attaching some of the parts- sigh.
The turret slat mounting is going to the top of my NOT FUN list! I had a sheet of paper full of measurements and helpful tips from @André Silva, but I still ended up spending too much time testing and fitting everything in place. An unfortunate tip-over during construction had me re-attaching some of the parts- sigh.
25 April, 17:27
Cortex
First time seeing the Voyager Slat Armour set being built, truly daring build and also inspiring.
First time seeing the Voyager Slat Armour set being built, truly daring build and also inspiring.
3 June, 00:47
hiveloc
Thank you Cortex! The slats were a real pain- Voyager's instructions are lacking and just plain wrong in spots, and I have a long list of gripes on the construction. I'm hoping that the side panels will mount up without too much trouble since I had to get well into the paint stage before I can do that. Keep an eye on André Silva's build, I think his slat armor is going to end up way better than mine!
Thank you Cortex! The slats were a real pain- Voyager's instructions are lacking and just plain wrong in spots, and I have a long list of gripes on the construction. I'm hoping that the side panels will mount up without too much trouble since I had to get well into the paint stage before I can do that. Keep an eye on André Silva's build, I think his slat armor is going to end up way better than mine!
3 June, 15:25
André Silva
Thank you for the kind works about my slat armour @hiveloc but it wont be better, you nailed yours, I fumbled mine,. @Cortex in that respect should follow your build which is looking better and better, it's going to be a doozie!
Thank you for the kind works about my slat armour @hiveloc but it wont be better, you nailed yours, I fumbled mine,. @Cortex in that respect should follow your build which is looking better and better, it's going to be a doozie!
4 June, 15:12
André Silva
Fantastic work, the slat armor and supports are perfect, the camo is spot-on.
Fantastic work, the slat armor and supports are perfect, the camo is spot-on.
13 June, 10:25
hiveloc
Thanks for your always-kind words @André Silva! I should be finishing up here soon, this one has been a ton of work for me.
Thanks for your always-kind words @André Silva! I should be finishing up here soon, this one has been a ton of work for me.
14 June, 15:29
Neuling
Done. Well done. Very well done. Everything just fine. It really looks like a ton of work.
Done. Well done. Very well done. Everything just fine. It really looks like a ton of work.
30 June, 09:02
Alexandre Reynaldo
akarja ezt
akarja ezt
Porsche 963 LMDh Penske Motorsport Team sponsored by Ansys #4, 5, 6
Profil 24 1:24
P24145 2024* Új eszköz 30 June, 09:00
Alexandre Reynaldo
akarja ezt
akarja ezt
Porsche 963 LMDh Proton Competition Team sponsored by Fat International #99
Profil 24 1:24
P24147 2024* Új alkatrészek 30 June, 09:00
Alexandre Reynaldo
akarja ezt
akarja ezt
Porsche 963 LMDh Jota Sport Team sponsored by Hertz #12, 38
Profil 24 1:24
P24146 2024* Új alkatrészek 30 June, 09:00
Dmitri Belousov
akarja ezt
akarja ezt
Set of embossed parts for K-52 (Zvezda 4830), single and double rows of rivets on a soluble varnish layer
Emboss 1:48
EM48022 30 June, 08:57
Sebastian Ågren
új fotóalbumot adott hozzá.
új fotóalbumot adott hozzá.
23 képek
Special Hobby - Saab JA-37 Viggen Fighter1:72
Finished!
By far the most detailed kit I have built so far, also really happy with the result.
Think I have found a ne...
49 20 August 2023, 12:23
Ferenc Sarka
The best ever camo, was the camuflage of the Viggen. I love it. Looking good so far.
The best ever camo, was the camuflage of the Viggen. I love it. Looking good so far.
2 November 2023, 21:21
Jason Marson
I'm building this kit at the moment. You did a great job on the camo masking. I'm using a masking set from DN Models, but it hasn't made it any easier! 😂 The kit itself is beautiful with fantastic details for a 1/72 scale one. I'm definitely going to buy this in 1/48 soon, though not sure if I'll attempt the camo again, 😂.
I'm building this kit at the moment. You did a great job on the camo masking. I'm using a masking set from DN Models, but it hasn't made it any easier! 😂 The kit itself is beautiful with fantastic details for a 1/72 scale one. I'm definitely going to buy this in 1/48 soon, though not sure if I'll attempt the camo again, 😂.
29 June, 23:21
Thomas Kolb
Every time I see one of the Viggens with its lovely splinter camo, I feel the urge to start the ones in my stash. Beautiful work, especially considering the completely manual tape masking method!
Every time I see one of the Viggens with its lovely splinter camo, I feel the urge to start the ones in my stash. Beautiful work, especially considering the completely manual tape masking method!
30 June, 07:31
Sparky Rogers
új fotóalbumot adott hozzá.
új fotóalbumot adott hozzá.
13 27 June, 19:41
Łukasz Gliński
Brilliant job, great scratchbuilding and the hemp on these big wings is just a cherry on the cake 👍
Brilliant job, great scratchbuilding and the hemp on these big wings is just a cherry on the cake 👍
29 June, 21:16
Thomas Kolb
This model looks amazing! Such a huge aircraft in just one color is tricky to make come alive, but your pre-shading and panel technique is super effective. Very nice indeed! So, do you have space to store this beast?
This model looks amazing! Such a huge aircraft in just one color is tricky to make come alive, but your pre-shading and panel technique is super effective. Very nice indeed! So, do you have space to store this beast?
30 June, 07:20
PlasticWolf
megszerezte ezt
megszerezte ezt
Mil
Mi-8 MT/MTV "Hip" - Exhaust Nozzles Set for HobbyBoss, Zvezda, KP, Revell HELI Resin Kits 1:72
ТС72116 2020 Új eszköz 30 June, 08:48
/hu/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=hu
35
35
/hu/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo