Hírfolyam

John
Cool! I was wondering how all the extra parts in mine looked when done, very nice. 👍

If you will accept a bit of advice, when you complete the cabin "shell" that goes into the fuselage halves, be prepared to do a lot of trimming and fitting before closing up. On mine, the sides of the fuselage wanted to push the roof of the cabin down and also hit the edges of the windscreen opening and that left a big gap on top. I finally got it acceptable fit, but even then, I wish I had cut more away because the cabin roof does not quite fit flush.

Qwertzel
Thanks for the advice. I'll take care of it 🙂
I build a lot of Revell kits in the past and the fitting was different with every model. I have got everything between pretty good and horrible. It's always like a mysterious box.

John
I'm sure you will do well with all that Revell experience. 👍 The good news is that other than the cabin shell, the rest fits OK (ish) even the windscreens. But if you want doors closed, also be prepared to do some surgery on them.

George Williams
Nice work so far.

Martin Oostrom
I agree

Bozzer
Your masking has definitely improved, mate. Nice job!

nikfrost
Thanks Bozzer! I think I'm getting the hang of this gloss finish also...hopefully.

Mr D
Nice 👍 very nice, the cast texture on the engine looks good, it's the prv V6 is it ?
I had an RC version as a kid .
Will look fantastic when the decals go on.
👌

nikfrost
The cast texture is Tamiya flat aluminium XF-16 very poorly sprayed by me haha, I think it was drying on its way from the airbrush to the surface and kind of built up.

Mr D
Worked well to the effect 👍 Tamiya dries really fast , l use Velejo mostly, l found Tamiya to fast n thickens up in the pot, Velejo doesn't harden like Tamiya n definitely needs good clear coat.
Nice project 👍

Guy Rump
The next aircraft for my WW2 collection will be a bit bigger than the other ones I have built so far this year. 🙂

Guy Rump
Made a start on the B-25 C with the cockpit area. Mainly used Vallejo Model Air US Light Green 🙂

Many thanks mate for your interest and like Franck G. 👍

Guy Rump
Bomb bay added for both sides. Cockpit etc added to fuselage on one side. Ballast added to hopefully not make it a tail sitter. 🙂

Many thanks mates for your interest and likes Pietro DA, airjuneau & 1 other mate. 👍

Nicolas
Following

Guy Rump
Bombs painted olive drab , decals added and affixed. 🙂

Welcome Nicolas. 👍

Thanks mates for your interest and likes Edward M, Sukhoi242, J35J & Dom S. 👍

Guy Rump
Fuselage together, wings and tail attached. No real issues 🙂

Many thanks mates for your interest and likes William J, Mirko R & Djordje N. 👍

Guy Rump
Engines now attached to the wings and the rear undercarriage. 🙂

Many thanks mate for your interest and like Lukasz G. 👍

Guy Rump
Not much progress here, the front undercarriage was added and then further weights were added where I could in order to stop it being a tail sitter. 🙂

Many thanks mates for your interest and likes Andrew B, Dave F, Bernd G & 1 other mate. 👍

Dave
Nice work, can't wait to see it finished

Villiers de Vos
Interesting subject.

jan zumack
I will give my best. 😁

Robin (WhiteGlint)
👀 👍

Mr D
Looking good, nice strong bold colours 👍👍 coming along well.

jan zumack
Thanks Mr D

Mr D
Do you mind if l ask what white paint you use??
I use Velejo for most my builds been good....but the white is poor in pigment!! I got recommend AK White.....and it is loads better but bit thick.
Like what you achieved so far 👌👍

jan zumack
Good question, i use Tamiya colors for the most projects. The White color ist named X2. I thinn it with Isopropanol.
Hope i could help you.

Mr D
Yes, good help as l didn't know the Tamiya paint could be thinned with isopropanol. I have few pots that have thickened up bit to much.
So will get some in.
Thanks 👍👍

jan zumack
You could Not all colors thin with Isopropanol, but the most. All glittering colors have to dry more than 24hours and use some gloves. If you didnt do it, you got fingerprints on your kit. I learn that the hard way. 😅

Dave
Looks great, nice job.

Mr D
Great 😃👍 pulled it of good well done 😀

Guy Rump
My latest offering will be my first helicopter. 🙂

Guy Rump
Made a start on the cockpit. Colours used are Vallejo Model Air black, Hataka khaki green & Hataka medium Sea Grey. 🙂

Many thanks mates for your interest and likes Hajo L, Laurent V, Andrew B, Sebastien C, Lukasz K, Tibor S, Freak & 1 other mate. 👍

J35J
Great start!

Guy Rump
A bit more done on the cockpit and sprayed the interior with Vallejo Model Air Gun Metal. 🙂

Thanks for the kind comment J35J, I appreciate it. 👍

Many thanks mates for your interest and likes J35J, Matti T & 1 other mate. 👍

Hajo Lippke
I like the cockpit! But are you sure with the grey colour for the backside and top of the instrument panel?

Guy Rump
Cockpit and main engine fitted to one side of the fuselage. 🙂

I agree with you Hajo, I have painted the top and back of the instrument panel (where there are no decals) black. I had intended to use a darker grey but the one I did use was quite light. 👍

Many thanks mates for your interest and likes Villiers DV, Neil P, Bernd G & Karel D. 👍

Guy Rump
Fuselage is now together. Next is to mask canopy and attach. 🙂

Many thanks mate for your interest and like Florian H. 👍

Ekki
Following.

Nicolas
I'm in. 👍

Sy Bar
🍿👍

Sergej I
Following! Definately coming out nicer than the one I did decades ago 😄 👍

Dave Flitton
Nice! I am following this one.

Guy Rump
Doors & undercarriage added. Masks added and primer airbrushed on. 🙂

Welcome Ekki, Nicolas, Sy, Sergej & Dave! 👍

Many thanks mates for your interest and likes airjuneau, walaroo, Gary V, David RM, Karel D, Dave F & Lukas M. 👍

Laurent VILLANUEVA "HELLER-forever"
top

Guy Rump
Hataka BS Dark Green, Hataka Dark Sea Grey & Vallejo Model Air Black colours used for the fuselage. 🙂

Thanks for the kind comment Laurent. 👍

Many thanks mates for your interest and likes Laurent V, Petr K, Sukhoi 242 & Dom S. 👍

Juergen Klinglhuber
Started this one.
The Ju 86 which were seen in 2 different Austrian markings, but at the end was never part of the Airforce. Here the overall silver Ju86 #311 at the airshow in Vienna-Aspern in early 1937.

Cuajete
Following 👍

Robert Podkoński
Interesting. Taking a seat here, of course!

Łukasz Gliński
Me 3 👍

Alec K
Me 4 🙂

Finn
I'm in

Dave Flitton
Watching!

Juergen Klinglhuber
Hello mates and thank you for your interest!

Juergen Klinglhuber
The mention aircraft was sent to the Airshow in Aspern as a "demonstrator" in austrian marking. Austria was interessed in buying 18 Ju86K-7. Due to several reasons Junkers was not prepared for that airshow and on short note removed the markings of an 86K-2 that was already prepared to be sold to Sweden. They put on austrian markings, a service number #311 and flew it over to Austria for just this one day. Flight captain Behrendt did a good job and the aerobatic air-display was a great success. So far so good. Why I am telling this? 86-K2 is a differend engine and cowling. The box is a 86E1/2. Aftermarket conversion products are out there (Kora) .....I had difficulties to locate/buy some.
Therefore: it is Scratchbuilding time again !!! 😎

Guy Rump
Following. 👍

Juergen Klinglhuber
Welcome Guy

Alec K
Nice progress. Modelimex is a place to get the Kora parts from, just in case 👍

Łukasz Gliński
There's one set here 😛
mojehobby.pl/product..I-Prewar-Bomber.html

Cuajete
Good explanation, Juergen 👍

Juergen Klinglhuber
thx Alec &Lukasz for you very kind support 👍 - appreciated.
But the first cuts are already done - no way back now 😉
(and I have to odmit: usually I like it to test my skills by a DIY task every now and then)

Bernd Grün
An Austrian Ju 86, I'm in! Nice start, Jürgen! 👍

Juergen Klinglhuber
Hi Bernd! thx

J35J
Great start! Watching with intrest.

Juergen Klinglhuber
Thank you and welcome J35J.

Stefan Fraundorfer
Ah, a new and very interesting project. Of course I will follow that. Have fun with the Ju 86 Jürgen.

Juergen Klinglhuber
Welcome aboard Stefan!

Juergen Klinglhuber
I have finished the modification on the engine resp. cowling. Some new pic's up-loaded.

Roland Sachsenhofer
Very interesting and extremely promising! We talked about it in Ried, and now I'm delighted to see these ideas being realised in such an impressive way!

Juergen Klinglhuber
🙏 Thx alot Roland, I am happy to receive your appreciation.

Nicolas
I'm joining this interesting build.

Łukasz Gliński
Impressive rework of the engines 👍

Alec K
I agree, looks very good 👍

TH SCALE MODELS (Thomas Haberl)
Nice progress Jürgen! I´m in to see how this beauty comes together 👍

Cuajete
Fantastic mods, 👌

Juergen Klinglhuber
Thank you mates for leaving your nice comments.Iam wWorking on the exhaust pipe currently. New picture up-date should be ready after this coming weekend.

Juergen Klinglhuber
All mod's are completted now - after adding the windows of the cockpit I can move it to the paint hangar.

Roland Sachsenhofer
Looks beautiful, clean and masterly done!

Juergen Klinglhuber
Hey - thank you Roland for your feedback. That gives motivation of course 🙂