P-38j aluminium/red
![Album image #1 Album image #1](/albums/img/9/2/6/1549926-65226-13-720.jpg)
The cockpit detail is acceptable in this scale. There are no decals but the raised detail is nice. I primed everything black and used some red paint and a aluminium drybrush to paint the details. After that I used clear varnish for a glass effect on the intrument panel. This cockpit was much like 1/72 scale academy kits and then I saw that this kit was indeed a adacemy design.
![Album image #2 Album image #2](/albums/img/9/2/7/1549927-65226-47-720.jpg)
Not bad at all. I used a greenbrown wash on all green parts. I did use the seatbeld decals for the first time ever. I don't know yet if I like it.
![Album image #3 Album image #3](/albums/img/9/2/8/1549928-65226-35-720.jpg)
The turbo super chargers can be added later in the build. So is painting is easier. I painted them brown and added a light post shade with dark earth. I then used a dry brush of dark aluminium for a metal effect. Clear varnish was added before the black wash the bringout the detail. I will still do more to it before I call it finished.
![Album image #4 Album image #4](/albums/img/9/2/9/1549929-65226-91-720.jpg)
Some nose weight is needed. on a plane like this. The fit of the fuselage halfs is decent but a lot of clean up is needed because the seam lines don't line up with any panel lines.( This was not enough weight)
![Album image #5 Album image #5](/albums/img/9/3/0/1549930-65226-54-720.jpg)
The radiator flaps have ejector pin marks and I don't know if you can see them. So better be safe and fill them.
![Album image #6 Album image #6](/albums/img/9/3/1/1549931-65226-35-720.jpg)
Some of the parts are painted with the main color. I used vallejo metal colour white aluminium. Some of these parts are weathered with ammo dark night wash.
![Album image #7 Album image #7](/albums/img/9/3/2/1549932-65226-75-720.jpg)
I primed the prop parts black and painted the cones white aluminium. The decals for the blades work great. I also prepared the cones for red paint.
![Album image #8 Album image #8](/albums/img/5/0/1/1553501-65226-53-720.jpg)
The fit is decent and getting all parts lined-up is not hard at all. But the connection points do need some cleanup. I did add some revits and you can see that the gun sight doesn't have a glass.
![Album image #9 Album image #9](/albums/img/4/9/9/1553499-65226-24-720.jpg)
I added a clear plastic sheet for the sight before I added the canopy.
![Album image #10 Album image #10](/albums/img/5/0/0/1553500-65226-64-720.jpg)
Masking the canopy was a problem. The canopy framing is molded lower then the glass. So I desided to use liquid mask. I hope that the cleanup won't be to bad.
![Album image #11 Album image #11](/albums/img/5/0/3/1553503-65226-90-720.jpg)
I used white alluminium as a main colour. I also use that for the rim colour.
![Album image #12 Album image #12](/albums/img/5/0/2/1553502-65226-29-720.jpg)
The Instructions stated that some panels needed to be darker so I masked some panels and used dark alluminium to get a different shade. I paint white as a base colour for all the red parts of the scheme.
![Album image #13 Album image #13](/albums/img/5/0/4/1553504-65226-26-720.jpg)
Not much red needs to be added. But some red decals will come later.
![Album image #14 Album image #14](/albums/img/3/4/2/1712342-65226-26-720.jpg)
I added a black wash the air intakes to make them seem deeper. I also painted the anti glare panels on the engines. I should have done the nose also but i wanted to try the decal. That wasn't the right choice in the end.
![Album image #15 Album image #15](/albums/img/7/4/5/1714745-65226-47-720.jpg)
The decals are decent except for the nose anti glare panel and The devil on the tip of the nose. I needed to paint some corrections to make it look better. Al other decals are great.
![Album image #16 Album image #16](/albums/img/7/4/4/1714744-65226-40-720.jpg)
I clear coated the model to seal the decals and added Ammo Brown Green wash to all panellines.
![Album image #17 Album image #17](/albums/img/7/4/3/1714743-65226-81-720.jpg)
![Album image #18 Album image #18](/albums/img/7/4/6/1714746-65226-72-720.jpg)
![Album image #19 Album image #19](/albums/img/7/4/7/1714747-65226-64-720.jpg)
I also used the enamel wash for streaking and staining. I do like the look of this and i will try to use this in the future. The wheels are also weathered.
![Album image #20 Album image #20](/albums/img/9/4/3/1716943-65226-48-720.jpg)
The exhaust streaks are made with africa sand and dark brown.
![Album image #21 Album image #21](/albums/img/9/4/2/1716942-65226-81-720.jpg)
I added some chipping to the black area's and the gun barrels are added. Good detail for this scale!
![Album image #22 Album image #22](/albums/img/9/4/4/1716944-65226-15-720.jpg)
The final pieces are assembled.
![Album image #23 Album image #23](/albums/img/9/4/5/1716945-65226-10-720.jpg)
The canopy masking didn't went wel but I could fix most of it with a cocktail stick and a bit of paint. But I didn't add enaugh nose weight so thats very unfortunate.
![Album image #24 Album image #24](/albums/img/9/4/6/1716946-65226-69-720.jpg)
Still I'm happy with de result.
![Album image #25 Album image #25](/albums/img/9/4/7/1716947-65226-55-720.jpg)
This view won't be seen again. I decided to glue the model to a base.
![Album image #26 Album image #26](/albums/img/9/4/8/1716948-65226-27-720.jpg)
![Album image #27 Album image #27](/albums/img/9/4/9/1716949-65226-96-720.jpg)
![Album image #28 Album image #28](/albums/img/9/5/0/1716950-65226-57-720.jpg)
I will use this base a made some time ago.
![Album image #29 Album image #29](/albums/img/9/5/1/1716951-65226-83-720.jpg)
![Album image #30 Album image #30](/albums/img/9/5/2/1716952-65226-41-720.jpg)
It's glued a finished now. I'm still happy with the result!
![Album image #31 Album image #31](/albums/img/9/5/3/1716953-65226-91-720.jpg)
![Album image #32 Album image #32](/albums/img/9/5/4/1716954-65226-42-720.jpg)
![Album image #33 Album image #33](/albums/img/9/5/5/1716955-65226-89-720.jpg)
![Album image #34 Album image #34](/albums/img/9/5/6/1716956-65226-71-720.jpg)
![Album image #35 Album image #35](/albums/img/9/5/7/1716957-65226-76-720.jpg)
![Album image #36 Album image #36](/albums/img/9/5/8/1716958-65226-95-720.jpg)
![Album image #37 Album image #37](/albums/img/9/5/9/1716959-65226-40-720.jpg)
![Album image #38 Album image #38](/albums/img/9/6/0/1716960-65226-18-720.jpg)
![Album image #39 Album image #39](/albums/img/9/6/1/1716961-65226-11-720.jpg)
![Album image #40 Album image #40](/albums/img/9/6/2/1716962-65226-54-720.jpg)
![Album image #41 Album image #41](/albums/img/9/6/3/1716963-65226-20-720.jpg)
![Album image #42 Album image #42](/albums/img/9/6/4/1716964-65226-67-720.jpg)
![Album image #43 Album image #43](/albums/img/9/6/5/1716965-65226-53-720.jpg)
Hozzászólások
63 13 September 2023, 11:00
![](/profiles/img/58017-515-s.jpg)
very nice and neat build and paint. what kind of paint did you use for the white and dark aluminium ?
9 December 2023, 06:49
![](/profiles/img/65226-827-s.jpg)
Thanks Pierre. I used vallejo metal colour white alluminium and dark alluminium.
9 December 2023, 11:13
![](/profiles/img/62842-375-s.jpg)
i am working on that kit right now. I would be happy it it will come out as good as yours, mate!
27 April, 11:15
![](/profiles/img/65226-827-s.jpg)
Thanks everyone!!! @Edward It's a great kit. And i'm happy with the result. Good luck with yours!
27 April, 12:37
Album info
This is one of my favorite ww2 planes and this set has some great schemes. I will build a bare matel one. I still need to improve my metal finishes because I want to use the practise for a Mirgae 3 build.