Üzenőfal
Wall
July 14, 2024
Qwertzel
új fotóalbumot adott hozzá.
új fotóalbumot adott hozzá.
16 képek
Revell Airbus H145 ADAC Luftrettung1:32
The hole in the roof is for LEDs
Projekt: Revell Airbus H145 ADAC Luftrettung
9 7 June, 15:25
John
Cool! I was wondering how all the extra parts in mine looked when done, very nice. 👍
If you will accept a bit of advice, when you complete the cabin "shell" that goes into the fuselage halves, be prepared to do a lot of trimming and fitting before closing up. On mine, the sides of the fuselage wanted to push the roof of the cabin down and also hit the edges of the windscreen opening and that left a big gap on top. I finally got it acceptable fit, but even then, I wish I had cut more away because the cabin roof does not quite fit flush.
Cool! I was wondering how all the extra parts in mine looked when done, very nice. 👍
If you will accept a bit of advice, when you complete the cabin "shell" that goes into the fuselage halves, be prepared to do a lot of trimming and fitting before closing up. On mine, the sides of the fuselage wanted to push the roof of the cabin down and also hit the edges of the windscreen opening and that left a big gap on top. I finally got it acceptable fit, but even then, I wish I had cut more away because the cabin roof does not quite fit flush.
20 June, 15:34
Qwertzel
Thanks for the advice. I'll take care of it 🙂
I build a lot of Revell kits in the past and the fitting was different with every model. I have got everything between pretty good and horrible. It's always like a mysterious box.
Thanks for the advice. I'll take care of it 🙂
I build a lot of Revell kits in the past and the fitting was different with every model. I have got everything between pretty good and horrible. It's always like a mysterious box.
20 June, 16:28
John
I'm sure you will do well with all that Revell experience. 👍 The good news is that other than the cabin shell, the rest fits OK (ish) even the windscreens. But if you want doors closed, also be prepared to do some surgery on them.
I'm sure you will do well with all that Revell experience. 👍 The good news is that other than the cabin shell, the rest fits OK (ish) even the windscreens. But if you want doors closed, also be prepared to do some surgery on them.
20 June, 17:35
July 10, 2024
Qwertzel
új fotóalbumot adott hozzá.
új fotóalbumot adott hozzá.
13 4 April, 16:38
DerSchottologe
I see you've left the license plate holder on. I should have done the same! I tried to remove it as requested in the instructions by "sanding it off" but my result isn't very good. The whole rear side looks a bit rough now haha.
I see you've left the license plate holder on. I should have done the same! I tried to remove it as requested in the instructions by "sanding it off" but my result isn't very good. The whole rear side looks a bit rough now haha.
10 July, 22:07
June 26, 2024
June 23, 2024
June 22, 2024
June 21, 2024
June 20, 2024
June 7, 2024
June 4, 2024
May 30, 2024
Qwertzel
akarja ezt
akarja ezt
5t Pallet Truck & Wooden Pallet with 200 Litre Oil Drum and Plastic Barrel
Gecko Models 1:35
35GM0034 2023 Új eszköz Több téma (3)30 May, 11:36
May 27, 2024
May 20, 2024
May 18, 2024
May 17, 2024
May 15, 2024
Qwertzel
akarja ezt
akarja ezt
US Army Light Type III Skid Steer Loader (M400W) with Bar Track
Gecko Models 1:35
35GM0009 2022 Új alkatrészek 15 May, 08:43
May 14, 2024
Qwertzel
akarja ezt
akarja ezt
Styrene Sheet 2.0mm thick x 245 x 195mm (1 unit)
AK Interactive
AK 6578 14 May, 09:11
Qwertzel
akarja ezt
akarja ezt
.010 inch (0.30mm) Clear Styrene Sheet 3 x Clear Styrene Sheets (175x300x0.30mm)
Plastruct
91201 (SSM-101) 14 May, 09:10
May 13, 2024
May 12, 2024
May 9, 2024
May 8, 2024
May 5, 2024
Qwertzel
akarja ezt
akarja ezt
4×4 chassis for German construction truck
A&N Model Trucks 1:24
ANMT-79 5 May, 18:08
Qwertzel
akarja ezt
akarja ezt
8×8 chassis for German construction truck
A&N Model Trucks 1:24
ANMT-80 5 May, 18:08
Qwertzel
akarja ezt
akarja ezt
German Construction Truck to use Italeri Mercedes Benz Actros MP4
A&N Model Trucks 1:24
ANMT-68 2018 Új eszköz 5 May, 18:07
Qwertzel
akarja ezt
akarja ezt
Mercedes Sprinter Third Generation
German panel van, 5.5 ton, normalA&N Model Trucks 1:24
ANMT-111 2020 Új eszköz 5 May, 18:06
May 4, 2024
May 3, 2024
Qwertzel
akarja ezt
akarja ezt
Working Vehice
Fire Ladder Truck Otsu Municipal Fire Department Aoshima 1:72
059708 (03) 2020 Új matricák 3 May, 19:56
April 30, 2024
April 27, 2024
wnolder.php?lang=hu
2024-04-27 13:43:36
2024-01-02 14:56:05
137072
/ajax/wnolder.php?lang=hu&sd=2024-04-27 13:43:36&md=2024-01-02 14:56:05&filter=&w=137072
todo