Visby corvette
Hozzászólások
29 April 2014, 17:00
![](/profiles/img/12906-s.jpg)
part 1 of the progress - vvsmodelling.com/2014/04/29/hswms-visby-1/
29 April 2014, 17:01
![](/profiles/img/10792-966-s.jpg)
Hi Sebastijan, you should clean the parts intensive before you add any detail or paint because of a greasy surface to to some stuff they propably use for their molds. Check this out, it is German but may you can read or translate it. modellmarine.de/inde..atid=139🤔ven
I ruined my scale 1/350 because no paint would stuck on the surface of my model. Cheers, Christian
29 April 2014, 17:53
![](/profiles/img/11788-s.jpg)
Hey Sebastijan, if you have any questions about building Orange Hobby models just contact me. I build the visby mentioned in the link from Christian.
29 April 2014, 18:00
![](/profiles/img/12906-s.jpg)
Thank you for your help guys. Truth is, I already primed the model before I posted this photos... And guess what - the primer flaked off 😄 I even cleaned the whole models prior with the nitro thinner, which should remove ANYTHING but to no avail. I have however now sprayed both models with ModelMaster enamel paint and it sticks to the surface without any problem. I guess the problem was in Alclad's grey primer, as it is lacquer based.
30 April 2014, 09:51
![](/profiles/img/10792-966-s.jpg)
You're welcome and good luck for your further progress with the build. Cheers, Christian
30 April 2014, 16:35
![](/profiles/img/12906-s.jpg)
Will keep you posted... Maybe the enamels will fail me as well, but at least they didn't flake off like Alclad's primer did... I will paint them later tonight and will see after unmasking...
30 April 2014, 17:06
![](/profiles/img/12906-s.jpg)
part 2 of the progress - vvsmodelling.com/2014/05/05/hswms-visby-2/
5 May 2014, 17:09
![](/profiles/img/10792-966-s.jpg)
Nice job so far Sebastijan. Interesting ships, I took some photos of a Visby in Plymouth in 2011.
modellmarine.de/inde..d=271:aktive-schiffe
5 May 2014, 18:22