makett adatbázis | polc kezelés
RedRoo
Kerry COX (RedRoo)
AU

AFV's Australian Viet-Nam Mk-V "Centurion" tank.

Hozzászólások

17 December 2015, 08:24
Thomas Kerl
Now that looks interesting, count me in!
17 December 2015, 09:51
Rui S
I kezza, welcome back.
This AFV kit looks great and it's nice to see that it needs just a minimal PE fret. Looks promising indeed.
I'm in 👍
17 December 2015, 12:36
Jonns Pfeiffenberger
Kerry, you know that this vehicle has no wings? 😛😉
17 December 2015, 12:44
Kerry COX
Jonns, Can you suggest where I could add some wings please mate, (🙂)as I know your imagination is as diverse as one could wish for, and I will try anything once. LOL 🙂 👍
17 December 2015, 13:17
Jonns Pfeiffenberger
oh I thought, because you have built lately many things with wings ...😉
17 December 2015, 14:00
Kerry COX
I try to build all kinds of things Jonns, as I would get bored very quickly if I just built "wingy things". 🙂
17 December 2015, 14:07
Jonns Pfeiffenberger
I am looking forward to it! 🙂 This will be an eye-catcher again! 🙂
17 December 2015, 14:39
Kerry COX
Great expectations eh. ? 🙂
Well, I know I will have a lot of fun, as I do have a personal 'connection' to the Centurion, having spent some time at Puckapunyal in Victoria when I first joined the army, (@ 17), and visiting the Kapyong barracks area from time to time where they were based. 👍
17 December 2015, 21:45
Holger Kranich
A personal connection is always good for a modeler! Count me in, Kerry😢
18 December 2015, 09:46
Kerry COX
Holger, Good to know your watching mate. 🙂
I do have a soft spot for these tanks, and watching them coming back from the firing range, smothered in the super fine dust of country Victoria, and the noise of their tracks on the concrete apron roads was just awesome. 🙂 🙂
18 December 2015, 10:17
Bart Goesaert
nice work on the suspension....
18 December 2015, 10:57
Kerry COX
Thank you Bart, I am really impressed with the fact that it is as detailed as it is, and the tooling to get that result must have been done by CAD. Just so well produced. 🙂
18 December 2015, 11:43
Gábor Bélik
Following with interest...
18 December 2015, 13:53
Christian Bruer
Detail increased much since I build my last AVF in that scale – welding seams, casting surfaces etc. and you have had a very good start on this Kerry!
Cheers, Christian
20 December 2015, 14:17
Kerry COX
Christian, your spot on about the detail in the kit, and AFV has really developed into the kits one 'must have'. and I am really enjoying this. 🙂 👍
20 December 2015, 15:10
Matthias Weiss
Hey Kerry, decided to stay on the ground now? Or just a short terms switch away from airplanes to ground vehicles?
That´s a nice one, looking forward to see what you make out of it. 👍
20 December 2015, 15:17
Kerry COX
I had my wings clipped Matthias, and I am quite enjoying the change. hehehehe. 🙂 👍
20 December 2015, 19:31
Matthias Weiss
Haha! Nice work, Kerry!
21 December 2015, 00:53
Steven Baerselman
Was just thinking about getting a centurion myself, or a hellcat (also AFV) - hope to see some great pics of this project in future 🙂
21 December 2015, 01:46
Kerry COX
Steven, AFV is just so good now, and the detail is all there, but always, there is room for that extra fine detailing.
I keep putting the bar higher and higher for myself, but it is really quite easy when the detail is already there, as it just needs a little enhancing, that's all. 🙂 👍
21 December 2015, 01:50
Steven Baerselman
I have just received a Bussing Nag L4500S from AFV Club (haven't built it yet, but the kit looks very nice - looking forward to do this one. Its only my 3rd kit so I can't say who is better than who though 🙂
21 December 2015, 02:19
Kerry COX
Kerry Cox It was the earlier models that were questionable, but what is on offer now is great right across the range. 🙂
Have fun anyway Steve. 🙂
21 December 2015, 13:54
Terry Wright
are AFV kits any good compared to trumpeter?
22 December 2015, 23:25
Steven Baerselman
Kerry says they are good, just above.
I've just yesterday started an AFV kit (Bussing Nag L4500S) but right from the start I am having a couple fit issues. Maybe just unlucky with a few bits at the beginning though.
22 December 2015, 23:35
Terry Wright
really wanting info on - flash, number of sprues per say £30 1:35 kit, how are the details and scribing compared to trumpeter, are there any PE parts, stuff like that, am totally unfamiliar with AFV kits so any links to reviews etc welcome, thanks
22 December 2015, 23:45
Travis Blackburn
Hello Kerry. Nice cent. I have looked at this kit a few times on line but had no idea it was that nice. Thanks for sharing. travis
22 December 2015, 23:57
Kerry COX
Terry, If you go through the images I have posted so far, ther will be some images of the sprus, photo etched and a bit of a 'blurb' on each image.
I hope they help .
Mine cos t $60.00 Au, ABOUT 35 QUID YOUR MONEY
google.com.au/url?sa..m=bv.110151844,d.dGY
Cheers. 🙂
23 December 2015, 01:13
Terry Wright
looks a good kit but i think Trumpeter are just a tad better quality
23 December 2015, 01:34
Kerry COX
Kerry Cox Thanks James, I did have some spare time and it was a great time.
And Terry, As for the comparison between the AFV and Trumpeter. I have never built a Trumpy so I have to take your word. ;-/
23 December 2015, 13:35
Kerry COX
I am actually on my second one James, as I was planning a diorama of a pair of them in tall grass in Viet Nam in a camp out situation with hoochies up and engine hatches open, :-/
But I am looking for the engine compartment internals that will help some what.
There are some good images I have come across of a perimeter patrol in company with some APC's that could look quite busy if I can get the right looking vegetation. 🙂
8 August 2016, 21:35
Kerry COX
OK. 🙂 I can do that, and this time, I have really made an effort to get all the periscopes the right colour both inside and out and especially the viewing block prism's. Tamiya acrylic clear green. Just enough to 'discolour' the glass.
Here is an awsome link for the Cent. google.com.au/url?sa..cCWdQlmtwc1Apu7oNVFg
9 August 2016, 05:51
Thomas Mayer
Just had a look at this Centurion. I have one in my stash, too, but I am afraid I would go nuts to redo all the tie-down straps...
Modelling at a high quality, just as I learned to know from you!
9 August 2016, 13:24
Kerry COX
Thomas. Thanks mate. 👍
I just get too fussy for my own good at times and I have a tendency to tackle things that should be left well alone, as I do spend far to much time and energy on stuff that will never see the light of day. :-/
With the second Mk-V I have under construction now, I am looking at an open engine compartment, but I am yet to find any on line. 🙁
The 'tie down' straps I am making will be from masking tape I have, and I put some body powder on the tape to reduce the 'tac' qualities making them easier to pass through the 'loops'. 🙂
9 August 2016, 19:42
Lex Jassies
I bought this tank years ago on a model exhibition very cheap from a private person. Checking it after coming home the bottom was completely warped. I replaced it with a thick sheet of styreen. Pity, details lost. But then, it's only the underside. The Mouse House edition about Australien Centurions supplied lots of details.
On this moment it's one of my kits resting, half build, in store waiting to see the daylight again.
So I will follow your built with interest.
9 August 2016, 21:20
Kerry COX
Lex. Have you tried getting the 'warp' out of the lower section by holding it in hot water and twisting it back to something like it was. ? 👍
How much have you actually done with the build. ?🙂
It is a very well detailed and at times complex build, as there are just so many small but vital parts that all have a place and role. 🙂
Get it out and see what you can do with it now mate. 👍
9 August 2016, 22:11
Lex Jassies
It was not only the bottom but also the sides who where badly warped (explaining the low price?). A new bottom plus some reinforcement ribs did the trick. I can remember that the kit built very nice without any problems. Only the fit of the tires was a bit sloppy.
I will look for some foto's I have from the built. This moment I'm busy with Hobby Boss M4 High speed tractor, AFV's Long Tom, Mirror's Diamont T and Bronco's Bailey bridge. Planning to put them thogether in a diorama. So finishing the Centurion have to wait a little longer ;P.
10 August 2016, 07:50
Danumurthi Mahendra
Very interesting project
10 August 2016, 08:08
Soeren R.
Ive really no clue about tanks, but it looks interesting - so count me in😉
10 August 2016, 08:45
Kerry COX
Lex. I used to build Bailey bridging when I was a young soldier in the Engineers (Aus army), and it is so good, that some that were built during WW2 are still in use in India and Nepal. 🙂
10 August 2016, 08:54
Lex Jassies
I found some pictures of my Centurion and will try to get these on SCM. I have these pictures where the mesh from the stowage basket sits at the outside. Then I have found a source for the Meteor engine used in the Centurion. It's from Resicast; item 352330. I have some stuff for my Churchill tank of this Belgium firm and they make beautifull stuff. So you can take a look at their site. resicast.com/contact/index.php
10 August 2016, 15:05
Kerry COX
An ENGINE. ???? Fantastic. Just the news I need mate. 🙂
I will be posting som images of the second build just as soon as I have done some work with the engine compartment.
The periscopes were a lot more of a challenge this time, as I wanted to get that pale green effect that looks real. 🙂
11 August 2016, 01:57
Lex Jassies
Hope you can lay hands on the engine. Yesterday I placed some pictures of my Centurion on SCM. So if you like you can, in my albums, take a look at my brew. So you have worked on Bailey bridges. Heavy work I suppose? I can imagine that building the real bridge goes quicker than the Bronco kit (I don't like the repetitive work very much)
11 August 2016, 07:25
Michael Hickey
Beautiful workmanship there mate, looking forward to seeing more.👍 Way down the road I plan on building AFV's Gun Truck in a Vietnam dio.
11 August 2016, 12:34
Kerry COX
Lex, the genuine bridging really is heavy work, as it's done section by section and gradually pushed out to reach the other side by building more counterweight lengths than the distance to be reached, all being pushed out on rollers. Yes, quite fascinating. 🙂
Have a look at this. 🙂 Youtube Video
 
11 August 2016, 18:12
Kerry COX
Mike, I was looking at an other Centurion build here by lexjassies and I noticed the use of brass for the small strap loops with flattened ends like the real thing and if I would have known that they were available, it would have saved me so much work. 🙁
Your Gun Truck dio is something I would really like to see Mike, as it was a strange place to have tanks and all the support they needed, as the terrain was just so 'unfriendly' for them, and there were a lot of rescues of bogged and snapped track situations there from what I have been able to find out.
11 August 2016, 18:19
Travis Blackburn
Thanks Kerry. The pictures of the nam centurion are great. Next month I will get one or two to play with. Thanks again. Travis
11 August 2016, 19:08
Lex Jassies
Kerry, the tie down cleats are from Aber "35A50". The casting numbers up front of the turret are also from Aber "35A59". For the tie down cleats I made a simple jig from scrap plastic to form them. About the Bailey Construction Video; impressive work!
11 August 2016, 19:26
Kerry COX
Lex. I am most impressed by your brass work, and I am pleased that it is something I can buy. !!! LOL 🙂
Would you be so kind and pass on the way you made the jig for making these TD cleats PLEASE. ????
They look so bloody cool mate. 🙂 🙂 👍
Travis, there are some really good vids on the Australian centurions in Nam.
Youtube Video
 
11 August 2016, 21:04
Lex Jassies
I placed a picture of the jig in my album. The demensions are depending of the width of the cleats. It's a bit trial and error. I think it took me about 15 to 20 minutes to make.
11 August 2016, 22:04
Michael Hickey
I think I might start the Gun Truck sooner rather than later, I'm always changing my mind on what to build next so I'll see what happens when I finish the Gainful / dio build. I do have the wrecked Fw 190 dio I want to do too. 🤔
11 August 2016, 22:06
Michael Hickey
Yeah I keep 99% of my stash in moving boxes ( last count was 25 ) so I can't see everything I've got otherwise nothing would ever get finished. 😄
11 August 2016, 22:32
Kerry COX
Michael. I have just ordered (Back ordered) from BNA, the cleat sheet and the number LEX posted is not quite right(34A50) as it is actually Aber 35A059. 👍
The look "Universal" to me. 🙂
12 August 2016, 01:30
Michael Hickey
Cool... I've decided when the time comes I will build my Gun Truck and have my AFV Bulldog on the same base. Even though it won't be 100% correct because I don't think the Yanks used it, they let the Sth Vietnamese have the fun of blowing things up with it.😢
12 August 2016, 04:06
Lex Jassies
I see that I mixed the numbers 50 and 59 up : (
About the jig; I rounded the shoulders of the bottom part but think if you keep them square the Tie Down Cleats will be straight and more prototypical. Hope you know what I mean?
12 August 2016, 11:14
Kerry COX
Lex, All is good mate, and I did notice very carefully the way you had it all stepped and sized for the best effect mate. I am so pleased you passed on that info . 🙂
12 August 2016, 12:00
Lex Jassies
My pleasure mate.
12 August 2016, 12:53
Travis Blackburn
Thanks Kerry. I will check them out. Have a good day. Travis
12 August 2016, 13:07
Kerry COX
Thanks for all the banter lads. 🙂
Every day, something new.👍
I love it. 🙂
12 August 2016, 19:25
Augie
Hmmm watching is I
12 August 2016, 19:30
Kerry COX
Augie. !!! :-O 🙂
G'day my friend. 🙂
And how is the settling in going. ?
Worked out your work space and all your equipment. ?
I have lost track of how many times I have moved house over the years.
It's not my favourite thing really. :-/
At the moment I am really looking at thinning out my stuff as I am getting crowded out. And being a hoarder is no help either . Grrrrr 🙂
Have you got anything on the go yet. ?
Cheers. 👍
13 August 2016, 12:57

Album info

In 1966, 32 Small Ships Sqn, Royal Australian Engineers, took the first lot of armour to Viet-Nam on the LSM. AV-1354 "Brudenell White" and off loaded them on the beach at Vung-Tau.
This was the first of many Centurions to be deployed there, and proved most valuable in the support of the Australian armed forces stationed there.
Also, I have included a photo of Centurion tanks en route to Vung Tau in 1969 on Army vessel 1356
"Clive Steele". Photograph courtesy of David Perham, veteran of 32 Small Ship
Squadron.

Összes album

Összes album megtekintése »