My Mig-31

1
February 26, 2016
2
February 4, 2016
Gunze H11 matt white applied to the missiles
3
February 4, 2016
Outlines and edges highlighted with a 0.7 HB pencil
4
February 4, 2016
After detailed and intensive masking, Gunze H18 Steel applied
5
February 4, 2016
Almost finished, only some corrections to the R-33 needed
6
February 4, 2016
Bare Metal Foil Ultra Bright Chrome and Matte Aluminum applied to several areas
7
February 4, 2016
Missiles finished
8
February 4, 2016
Gunze SM Iron and Tamiya X10 applied to the motors
9
February 4, 2016
The whole was washed with a mixture of black-brown-blue-green mixture of watercolors.
10
February 4, 2016
After cleaning the excess watercolors with a muji fine ear stick and water, different Akan metallic liquid pigments (96015 Golden-Smoky Burnt Metal, 96016 Golden-Grey Burnt Metal, 96017 Grey-Purple Burnt Metal) were applied
11
February 4, 2016
Same as previous with a different angle
12
February 4, 2016
Glossy warnish (Testors) applied
13
February 4, 2016
Same as previous but different angle
14
February 4, 2016
The intakes were painted with Gunze MC Chrome Silver buff color and then buffed. Akan 73060 Radome Green, Gunze H57 Grey and Revell H12 Matt Black appied to some spots
15
February 4, 2016
All of the motor parts at once.. The Afterburner painted with Gunze SM Super Titanium
16
February 4, 2016
Check how everything fits into the body.
17
February 4, 2016
Everything fits and looks nice
18
February 4, 2016
Perfect fit
19
February 4, 2016
Perfect fit, bad zooming
20
February 4, 2016
Better zooming some washing needed in the intakes
21
February 4, 2016
Washing of the lading gear bays with the aame watercolor mixture and cleanign afterwards. At the end it is still buffing but somewhat rustier and dirtier.
22
February 4, 2016
The wing construction is amazing and should be a perfect example for other kit designers.
23
February 4, 2016
No possiblity to make a mistake with that construction
24
February 4, 2016
Chech how everything is fitting together
25
February 4, 2016
The design is so perfect that only minimal putty ans sanding will be needed after closing the body.
26
February 4, 2016
Flaps and slats down positioned, front part slided in for testing. Result: Amazing!!!
27
February 4, 2016
Akan 73005 Mig cockpit color applied. Beware, scratch resistance of this color is low, a primer would be beter before applying the color (i did not and suffered a bit)
28
February 4, 2016
Revell Aqua H11 Matt Black applied to the knobs and panels
29
February 4, 2016
everal Revell Aqua colors applied for detailing
30
February 4, 2016
Test fit. i applied a dark grey watercolor line to the edges on the ground
31
February 4, 2016
From another angle
32
February 4, 2016
I used a minimum quantity of dark brown oil color from my wife's painting material for a dirt wash, maybe exagerated a bit but most of these will disappear below the seats.
33
February 4, 2016
The cockpit slided into the one-piece (!!!) front part
34
February 4, 2016
I applied a minimum quantity of AK metal wax to the bottom for simulating the shoe wearing
35
February 4, 2016
The seats are very good, only a little work needed on top. No harnesses? No and no aftermarket products yet, so i need to find a way to make them by myself.
36
February 4, 2016
Different angle
37
February 4, 2016
Thest fit of the seats.
38
February 15, 2016
Cockpit almost complete
39
February 15, 2016
Cockpit almost complete
40
February 15, 2016
Body test fit
41
February 15, 2016
This kit will need only minimal amounts of putty and sanding, only to make the joining lines look like panel lines.
42
February 15, 2016
Body montage
43
February 15, 2016
Body montage
44
February 15, 2016
Impressive plane
45
February 15, 2016
Different angle
46
February 15, 2016
Mr. Surfacer 1200 primer application
47
February 15, 2016
Preshading with Gunze H12 diluted 3:1 with Lacquer Thinner
48
February 15, 2016
After applying diluted Gunze H306 in 2 layers, the shading looks almost perfect.
49
February 15, 2016
I wonder how it will look after washing the panel lines and rivets
50
February 15, 2016
Fine details
51
February 15, 2016
Only some details like the landing gear, pylons & wapons and the jet exhaust left
52
February 15, 2016
Almost done
53
February 15, 2016
Then a layer of gloss coat will be applied.
54
February 15, 2016
Harnesses from Tamiya masking tape
55
February 18, 2016
56
February 18, 2016
57
February 18, 2016
58
February 26, 2016
59
February 26, 2016
60
February 26, 2016
61
February 26, 2016

Hozzászólások

4 February 2016, 09:03

Denis Kuleshov
Awesome detailing. I'am watching

4 February 2016, 09:45

Bart Goesaert
nice build so far, seems like a breeze in the park to build this one...

4 February 2016, 10:27

Selman Yarar
Age 52, modeller only since 1 year, weak eyes, trembling fingers, that's the best i can do under these circumstances for now.. 🙂

4 February 2016, 10:34

Scott Dutton
Engines look too good to hide, nice job

15 February 2016, 13:47

Harry Eder
WOW your Mig looks really great! 👍

18 February 2016, 16:37

Wim van der Luijt
Looking good so far. I agree that it is a shame to hide those engines

18 February 2016, 16:41

Hakan ERYILMAZ
Yes,really great

23 February 2016, 23:07

Selman Yarar
Thanks to all... in a couple of days it will be finished and i'll share the result

24 February 2016, 06:48

Selman Yarar
Finished. Result is not bad but i've made some basic errors! Beware of the horizontal stabilizer positions and CAUTION: Jet exhausts don't fit, it was extremely problematic. Don't finish the fuselage assembly before checking the position of the exhausts!

26 February 2016, 19:01

Bart Goesaert
will try to remember this tip...but the result looks nice in the pics shown...

29 February 2016, 08:05

Selman Yarar
I've learned what the problem was. The parts should click-in but as these locations were painted, even the thinnest paint layer prevented them to fit. So don't paint the joining parts as they will be hidden inside. Strange that this is made so extremely tight!!!

29 February 2016, 09:12

Bart Goesaert
don't think it's strange, otherwise there would be complaints about small gaps end steps that shouldn't be there.... you can't make it good both way's...

29 February 2016, 10:11

Selman Yarar
true 🙂

29 February 2016, 14:37

Christian Ristits
Very well done Selman! And thank you for the hints, I will keep them in mind!

29 February 2016, 16:28

Selman Yarar
At least there should be a remark on the instructions to avoid painting at those places...

1 March 2016, 21:50

Tahir Özcivan
Congratulations Selman. I know that it was a tiring project but the result is quite satisfactory. Very well ddone.

1 March 2016, 21:56

Project info

-SOLD- Mikoyan MiG-31BSM Foxhound - AMK 1:48

65 képek

1:48

Befejezve

1:48 Mikoyan MiG-31BM/BSM Foxhound (AvantGarde Model Kits 88003)

Mikoyan MiG-31BM Foxhound

Военно-воздушные силы России (Russian Air Force 1992-2015)
34 Red Ivan Pilipenko
2013 - Kansk AB
FS26493

Összes album

Összes album megtekintése »