Üzenőfal
Wall
Skyhiker
új fotóalbumot adott hozzá.
új fotóalbumot adott hozzá.
75 képek
Focke Wulf Ta 152 H-1 (1970 tooling)Új: 11 July, 22:55 1:72
It looks like landing gear now.
Projekt: Focke-Wulf Ta 152 H
All comments (106) » 61 27 January, 18:23
Thomas Kolb
Wow, what an insane amount of work you put into this project! I am humbled by your perseverance and attention to detail!
Wow, what an insane amount of work you put into this project! I am humbled by your perseverance and attention to detail!
12 July, 03:34
July 11, 2024
July 10, 2024
July 7, 2024
July 6, 2024
July 4, 2024
July 2, 2024
June 29, 2024
June 23, 2024
June 16, 2024
June 14, 2024
June 11, 2024
June 8, 2024
June 7, 2024
June 6, 2024
June 2, 2024
Skyhiker
akarja ezt
akarja ezt
Dornier Do 27 / CASA C-127 "German, Spanish and Belgian Service"
Special Hobby 1:72
SH72327 2018 Új eszköz 2 June, 14:29
June 1, 2024
Skyhiker
The rivet wheels do not role easily and are far too big to get into corners. Not very useful.
The rivet wheels do not role easily and are far too big to get into corners. Not very useful.
1 June, 14:19
May 30, 2024
May 29, 2024
Skyhiker
megszerezte ezt
megszerezte ezt
Micro Brass Tube / 0.9mm OD x 0.7mm ID x 305mm L
Albion Alloys
MBT09 29 May, 14:44
May 27, 2024
May 26, 2024
May 25, 2024
Skyhiker
Is there a way to see a list of products that member's have on their trade lists? I'm not looking for anything in particular but want to browse for deals.
25 May, 13:50
Skyhiker
megszerezte ezt
megszerezte ezt
Micro Brass Tube / 0.9mm OD x 0.7mm ID x 305mm L
Albion Alloys
MBT09 25 May, 13:07
May 24, 2024
May 23, 2024
Skyhiker
I bought this blade and unfortunately it broke within a day of use. I wrote to the manufacturer requesting a replacement today. I'll let you know if they respond.
I bought this blade and unfortunately it broke within a day of use. I wrote to the manufacturer requesting a replacement today. I'll let you know if they respond.
BD0042 Fine Engraving Blade 0,1 mm
Border Model
BD0042 1 23 May, 14:41
May 21, 2024
Skyhiker
megszerezte ezt
megszerezte ezt
Tamiya Craft Tools Series
Modelling Template (Square, 1-10mm) For Advanced Users Tamiya
74156 (No.156) 2020 Új eszköz 21 May, 14:56
Skyhiker
megszerezte ezt
megszerezte ezt
Tamiya Craft Tools Series
Modelling Template (Round, 1-12.5mm) For Advanced Users Tamiya
74150 (No.150) 2019 Új eszköz 21 May, 14:54
May 20, 2024
May 19, 2024
May 18, 2024
May 17, 2024
May 14, 2024
May 13, 2024
May 11, 2024
May 10, 2024
May 7, 2024
Skyhiker
új fotóalbumot adott hozzá.
új fotóalbumot adott hozzá.
1 képek
MiG-29UB Fulcrum1:72
This is an ancient model that I hand painted with enamel about 30 years ago. It is one of my earliest.
Projekt: MiG-29UB Fulcrum
1 7 May, 21:56
May 6, 2024
May 4, 2024
Skyhiker
új fotóalbumot adott hozzá.
új fotóalbumot adott hozzá.
All comments (17) » 59 22 December 2019, 12:10
Michael Kohl
Looks beautiful. I still fight an uphill battle with my Revell 1:144 one. Yours being Heller moulds I suppose building it was more straightforward. Good, that you kept the nose up. Looks better that way. 🙂
Looks beautiful. I still fight an uphill battle with my Revell 1:144 one. Yours being Heller moulds I suppose building it was more straightforward. Good, that you kept the nose up. Looks better that way. 🙂
4 May, 11:34
Skyhiker
Thanks guys. The nose on this kit has a lot of issues. I scratch built the inside of the nose floor and kept it in the up position because the engineering was very poor. Other than that the kit is great and went together quickly.
Thanks guys. The nose on this kit has a lot of issues. I scratch built the inside of the nose floor and kept it in the up position because the engineering was very poor. Other than that the kit is great and went together quickly.
4 May, 16:16
May 2, 2024
April 30, 2024
April 21, 2024
April 10, 2024
Skyhiker
This kit is very old and has many flaws. Expect to do a lot of scratch building if you want to make it look acceptable.
This kit is very old and has many flaws. Expect to do a lot of scratch building if you want to make it look acceptable.
1 10 April, 16:17
April 4, 2024
April 3, 2024
March 21, 2024
March 6, 2024
March 3, 2024
February 25, 2024
February 23, 2024
Skyhiker
új fotóalbumot adott hozzá.
új fotóalbumot adott hozzá.
5 képek
Arado Ar. E 5551:72
Don't mind the photo edit on the vertical stabilizer, just trying to follow current German law.
Projekt: Arado Ar. E 555
All comments (25) » 68 5 November 2022, 21:02
February 17, 2024
February 8, 2024
February 5, 2024
February 2, 2024
February 1, 2024
January 31, 2024
January 30, 2024
January 29, 2024
January 27, 2024
Skyhiker
új fotóalbumot adott hozzá.
új fotóalbumot adott hozzá.
All comments (41) » 61 19 March 2023, 17:36
Skyhiker
Nicolas I started putting my models in frames, as a temporary solution to keep the dust off of them, after I found a model on my shelf covered with an inch (2cm) of dust. The mirror I stuck underneath the plane because I wanted to be able to see the bottom of the plane. Some day I hope to have enough room to make a proper display case with dramatic lighting, but for now the frames will have to do. They are pretty versatile but have some draw backs. Acrylic cases would be better because then I could see more of the plane, but I can't afford that. The frames are 7 times cheaper to make.
Nicolas I started putting my models in frames, as a temporary solution to keep the dust off of them, after I found a model on my shelf covered with an inch (2cm) of dust. The mirror I stuck underneath the plane because I wanted to be able to see the bottom of the plane. Some day I hope to have enough room to make a proper display case with dramatic lighting, but for now the frames will have to do. They are pretty versatile but have some draw backs. Acrylic cases would be better because then I could see more of the plane, but I can't afford that. The frames are 7 times cheaper to make.
27 January, 14:07
Skyhiker
Thomas, thanks for the compliment. The canopy mirror from the kit was just a dumb little bump that I ended up sanding off. I replaced it with a cut down needle and some styrene after looking at photos of the original plane. It was hard to find vintage photos but eventually I came across a few. I think it came out pretty well considering the 1/72 scale. Of course photo-etch would have been better but I couldn't be bothered with that. I just wanted to finally get it done.
Thomas, thanks for the compliment. The canopy mirror from the kit was just a dumb little bump that I ended up sanding off. I replaced it with a cut down needle and some styrene after looking at photos of the original plane. It was hard to find vintage photos but eventually I came across a few. I think it came out pretty well considering the 1/72 scale. Of course photo-etch would have been better but I couldn't be bothered with that. I just wanted to finally get it done.
27 January, 14:17
January 22, 2024
January 15, 2024
January 13, 2024
January 11, 2024
wnolder.php?lang=hu
2024-01-11 16:51:48
2018-12-23 23:12:24
46074
/ajax/wnolder.php?lang=hu&sd=2024-01-11 16:51:48&md=2018-12-23 23:12:24&filter=&w=46074
todo