Part 2 - Soviet Heavy Metal - Tu-128 Diorama Base

1
March 15, 2021
That's the plan.
2
March 15, 2021
This is what we got: A fancy bamboo cutting board as our diorama basis, the (awesome) PAG-14 airfield plates from ICM, an Ural 4320 truck also from ICM, an APA-5D airfield service vehicle conversion set from Armory, boarding ladders, wheel chocks. Did I miss something?
3
March 15, 2021
Ural 4320, an all-terrain, all-purpose 6x6 backbone of the eastern block (with its predecessor Ural 375)
4
March 15, 2021
The cabin, not much bigger than my thumb. Some flash and quite good detail for 1:72
5
March 15, 2021
The conversion kit for the APA-5D service vehicle which provided all kinds of AC/DC to the airplanes on the ground. Nice white resin casting, no bubbles. Photoetch and Decal.
6
March 15, 2021
Not really much to the chassis, but enough detail.
7
March 15, 2021
Wheel profile is not great, not terrible. A solid 3.6/10. There is aftermarket replacement for them, but the kit ones do not bother me too much. Will be covered in snow anyway!
8
March 15, 2021
There are three kinds of PE parts: fragile...
9
March 15, 2021
...small...
10
March 15, 2021
...and tiny.
11
March 15, 2021
I probably would have been perfectly fine without having to bend each 1:72 cable holding hook individually, but hey...here we are.
12
March 15, 2021
Soldering...
13
March 15, 2021
...and cleaning.
14
March 15, 2021
Attachment points for the cable holding swinging arms
15
March 17, 2021
Swinging arm attached
16
March 17, 2021
Implemented a metal axis into the construction so it is movable like on the real thing
17
March 17, 2021
Cabin already painted before installing the interior and windows. Kit windows were fairly thick and uneven, sanded them flat and a little thinner.
18
March 17, 2021
The conversion kit guys even included a miniature control panel for all the airplane service equipment
19
March 17, 2021
20
March 17, 2021
Made some additional little handles and struts, reworked the fenders a little
21
March 17, 2021
Painting time!
22
March 17, 2021
Here is the real deal btw
23
March 21, 2021
Electrical unit painted
24
March 21, 2021
Russian green, a wash, highlights, drybrushing. Nothing fancy.
25
March 21, 2021
Dry fit
26
March 21, 2021
Started working on the diorama plate.
27
March 21, 2021
ICM's PAG-14 concrete plates attached with superglue
28
March 21, 2021
I considered to ditch the plates and "painting" them since almost the whole area will be covered in snow anyway. But then realized I had to get rid of the wood grain of the board first. So the "real" plates was the simplest and more time saving solution after all
29
March 21, 2021
The gaps were sealed with superglue and superglue filler
30
March 21, 2021
Excess was cut off...
31
March 21, 2021
...and reused to fill the smaller sections at the edges
32
March 21, 2021
A totale of the whole artwork
33
March 21, 2021
View from behind
34
March 21, 2021
Cutting off the last remains
35
March 21, 2021
Applying them parallel to the board would have been less troublesome, but tilted like this it just looks better imo
36
March 26, 2021
The edges are then smoothed out
37
March 26, 2021
Additionally I layed down a layer of polyester putty to fill the last gaps
38
March 26, 2021
Painting process. After a coat of grey primer I did this kind of "preshading"
39
March 26, 2021
On pictures of these plates you see subtle but noticeable color differences between them coming presumably from different production batches where different "filler" materials were used in the concrete. The distribution should be more or less random.
40
March 26, 2021
Now we lay down several coats with well diluted grey paint
41
March 26, 2021
Until we get the desired effect. The coverage should be not too opaque and not too thin
42
March 26, 2021
In the next step we sprinkle random droplets with very diluted paint
43
March 26, 2021
Also in a random fashion and different colors to simulate all kinds of spills and holes in the concrete
44
March 26, 2021
After sealing everything with Future I lay down a heavy black wash
45
March 26, 2021
Let it set for good 10-15 minutes and wipe it off (with a dry cloth) focusing more on the centre of the plates
46
March 26, 2021
Last step was drybrushing with white which brings out all the edges and the fine structure of the plates a bit more
47
March 26, 2021
You see on pictures that often there is a "line" of bitumen sealing between the plates.
48
March 26, 2021
49
March 26, 2021
I tried to recreate it, figured a black paint marker was the right choice but noticed it did not look really good after half was done
50
March 26, 2021
The wavy and uneven application was deliberate but the contrast was just too strong, so i applied a thin layer of grey on top of the black sealing
51
March 26, 2021
Anyway, this is the result. I am not entirely happy with that, nex time I will do it differently and more subtly but since most of this will be covered in snow i'll give it a pass 👍
52
March 27, 2021
Let's dedicate ourselves to the main contender of the base: the snow. In order not to ruin the main base plate entirely I decided to do some test runs with different methods of snow application. Cue test subject Nr. 1. Just painted a small plate grey and drew some lines to simulate the concrete plates.
53
March 27, 2021
I want to recreate the snow accumulations around and beyond the airplane like it is seen on the picture.
54
March 27, 2021
For the bulk of the snow I am using a simple air curing modelling clay. This is applied in irregular piles. For this test piece I orient myself on the method described by this gentleman in his video: Youtube Video
55
March 27, 2021
White "frosting" sprayed aroud the edges
56
March 27, 2021
When the clay is dry we apply a mixture of acrylic sealant from the hardware store, white paint and water.
57
March 27, 2021
Followed by a layer of this good stuff. This particular products is not a powder, but fine viscose flocks, similar to very fine static grass.
58
March 27, 2021
Using our snow applicator 5000
59
March 27, 2021
Which is actually a flour sieve but works perfectly for our cause
60
March 27, 2021
61
March 27, 2021
Let it snow!
62
March 27, 2021
And this is the result
63
March 27, 2021
I must say, this is pretty convincing snow
64
March 27, 2021
Especially from particular angles, light conditions and a distance
65
March 27, 2021
BUT. What we have to consider is the scale effect. If you look closely it looks fuzzy. Because in essence this product is the same as static grass, just in white.
66
March 27, 2021
Under direct sunlight conditions it is even more evident.
67
March 27, 2021
Ok, that was test subject Nr. 1! It looks pretty good, it might work in 1:35 but for 1:72 it seems a little "out of scale"
68
March 28, 2021
Test subject numero dos, same procedure
69
March 28, 2021
This is the clay I use BTW. It is already "wet", no mixing with water required. Very convenient. Dries overnight.
70
March 28, 2021
The contenders for this experiment.
71
March 28, 2021
Left to right: "Terrains Snow" a white, fluffy goop. Like molten marshmallow. Used to depict deep and fresh fallen snow. "Snow sprinkles", much more dense and more clear in appearance. Used for molten and frozen snow. "Snow Microballoons", a very fine Powder, ingredients not specified besides "Acryl". May be mixed or sprinkled on top with the other two to get a variety of effects.
72
March 28, 2021
Similar order of actions as the first test subject. The fluffy goop is diluted with water a bit and applied on top.
73
March 28, 2021
Followed by sprinkling on the microballoons. First impression: very, very convincing!
74
March 28, 2021
75
March 28, 2021
Detail work, to make flat, trampled down snow I apply the stuff, even more diluted, in irregular blotches on the surface and sprinkle the Microballoons on it.
76
March 28, 2021
This is the end result. At the very left corner I used a mixture of "Snow Sprinkles" and "Microballoons" which gives the appearance of very hard and icy snow that melted and froze again. The rest is the "Terrains Snow" with Microballoons sprinkled on top, which gives the impression of somewhat fresher snow.
77
March 28, 2021
It is even possible to make impressions of all kinds, like truck tires for example.
78
March 28, 2021
I think the winner has been determined!
79
March 28, 2021
But the first contender is getting a little consolation prize👍 Was having some fun while I was in "Winter Mode" and made a little diorama for my winter camo Panzer 3 I built a few years ago.
80
March 28, 2021
Now let's tackle the big one!
81
March 29, 2021
Let's finish the vehicle first. My "cables" came in with the mail, finally. These are elastic bands used for DIY necklaces.
82
March 29, 2021
Speaking of which, the cables are a trademark of this vehicle
83
March 29, 2021
My research has shown there are three types of connectors
84
March 29, 2021
Which provide three different types of current: DC, three phase AC and one phase AC
85
March 29, 2021
Which can be combined and plugged in countless ways fitting the purposes of the airfield in is used on. The configuration and placement of wires is also different for each vehicle. Which gave me a little "artistic freedom"
86
March 29, 2021
I made the connectors from various styrene strips
87
March 29, 2021
In total 5 sets of cables were made. Three plugged in in the panel and one will be feeding our airplane
88
March 29, 2021
The cables are also different in size and appearance, this one is a bundle of 4 small ones held together with clamps, which I recreated using flattened lead wire
89
March 29, 2021
The little hose clamps on top of the arm were also made from scratch. The ones from the conversion kit were unusable.
90
March 29, 2021
91
March 29, 2021
92
March 29, 2021
Found the right wheel chocks for our project
93
March 29, 2021
Was quite the pain in the a** soldering them but the practice with the flimsy vehicle arms paid off
94
March 29, 2021
Made them chipped and well used
95
March 29, 2021
Sneak preview
96
March 30, 2021
Finally tamed this little beast, all pics in an separate album, if you like!

Part 3 - Soviet Heavy Metal - Ural 4320 APA-5D Airfield Service Vehicle | Album by Alex G. (1:72)
97
April 1, 2021
This next addition I deliberated over a long time should I do it or not
98
April 1, 2021
The culprit is this particular stepladder
99
April 1, 2021
Which I encountered many many times in my reference material
100
April 1, 2021
Everywhere. It seems to have been designed specifically for this airplane to give the two man crew and the servicemen the best possible access to both cockpits
101
April 1, 2021
The aftermarket is really scarce in this case. I found a couple of etched ladders but frankly they would have been a poor compromise...
102
April 1, 2021
I deliberated really long whether to burden myself with it or not. The main problem was I did not find any reference material for this ladder. No sizes, no drawings, nothing. All I had are there B/W photos mostly with some bloke standing conveniently in the way.
103
April 1, 2021
But feeling judged by this comrade for my attempt to chicken out I started working.
104
April 1, 2021
Material of choice were Nickel Silver rods by Albion Alloys
105
April 1, 2021
The platform was taken from one of the PE sets, in my estimation it was the perfect size.
106
April 1, 2021
The rest was bending and soldering
107
April 1, 2021
I drew the framework of the ladder on paper, estimating the size as well as possible from the pictures
108
April 1, 2021
This was used as a template for the main structure
109
April 1, 2021
110
April 1, 2021
All kinds of contraptions were used to align the pieces
111
April 1, 2021
And this was the result of one day of work
112
April 1, 2021
113
April 1, 2021
This is how the working place looked like at the beginning...
114
April 1, 2021
...and towards the end
115
April 1, 2021
The steps were taken from the PE sets and modified by adding reinforcement struts
116
April 1, 2021
Two whole days and "meters" of soldering wire later this was the result
117
April 1, 2021
The wheels were made from spare parts
118
April 1, 2021
119
April 1, 2021
I had to make one little compromise...
120
April 1, 2021
The floor on the original is perforated and my disregard for this fact is met by this comrade with disgust
121
April 1, 2021
But I am not a perfect human being either so I am ok with that little inaccuracy, let's not forget the scale effect!
122
April 1, 2021
That was a new one for me and I am really happy with the result. A huge contrubiting factor was the encouragement of you guys, thanks for your positive comments and the likes 👍
123
May 6, 2021
to be continued...
124
March 21, 2023
Time to make it snow, first the approximate placement of the contenders
125
March 21, 2023
..and application of the snow heaps around them
126
March 21, 2023
I used the same clay as on the test dioramas
127
March 21, 2023
This seems pretty good
128
March 21, 2023
Followed by a treatment with the other Vallejo snow products as described in the thread
129
March 21, 2023
What is absolutely necessary when it is snowing? Snow shovels! These were made using various materials like brass sheet, styrene profiles and a lead strip.
130
March 22, 2023
Dioramas and especially figurines have always been outside my comfort zone but for this project I decided to take this step so please don't judge me too harshly on what follows!

Our main player is the pilot, a really nice and clean depiction by Aerobonus. He has to be modified a little in order not to look anachronistic.
131
March 22, 2023
The helmet is wrong and needs a little reworking and I want to get rid of the life jacket to make a "normal" pilot jacket. Plus he does not need his sidearm.
132
March 22, 2023
The helmet needs a visor, I cut it out from 0,2mm tin foil
133
March 22, 2023
This is sufficient
134
March 22, 2023
The other figures, pilots, mechanics, other personnell came from different sets, two from CMK
135
March 22, 2023
Since the setting takes place in a cold climate and I did not want the guys to catch a cold and neglect their duties they all received appropriate headgear.
136
March 22, 2023
The Soviet style ushanka hats were stolen from a Pegasus Hobbies WW2 Russian Infantry set and makes even the french mechanic Jean on the right look like an Ivan! He was abducted with his compatriot from a CMK kit.
137
March 22, 2023
This fine gentleman was taken from an "Alex Miniatures" set. Not sure what he is supposed to represent, maybe some Ministry of the Interior staff or even KGB. I included him because of his swagger
138
March 22, 2023
High brass and little helper expaining us something are from "Alex Miniatures" as well
139
March 22, 2023
The gang is complete!
140
March 23, 2023
Base painting was done using Vallejo Model Color acrylics and a wet palette. The mechanics received blue/blue grey overalls. Some had jackets.
141
March 23, 2023
I tried to vary the colors to prevent a homogenous monotony, used several shades of grey and blue, also take notice of the purple beanie on the helper!
142
March 23, 2023
The KGB guy received a fancy leather jacket...
143
March 23, 2023
...the low rank mechanic a dirty grey overall and an old ushanka
144
March 23, 2023
The air force high brass received a uniform in according colors. I am no expert in this field but according to my research this looks the part. The light blue collar badges and the hat ribbon were air force colors.
145
March 23, 2023
Base painting done, now to the finishing touches.
146
March 23, 2023
Used some washes to accentuate the shadows and increase the depths
147
March 23, 2023
148
March 23, 2023
149
March 23, 2023
Dry brushing was used for high lighting, various details painted with fine brushes
150
March 23, 2023
Like I said, figure painting is far outside my comfort zone but I am content with the result!
151
March 23, 2023
There are various Youtube tutorials which were helpful
152
March 23, 2023
153
March 25, 2023
154
March 25, 2023
155
March 25, 2023
156
March 25, 2023
157
March 25, 2023
158
March 25, 2023
159
March 25, 2023
160
March 25, 2023
161
March 25, 2023
162
March 25, 2023
163
March 25, 2023
164
March 25, 2023
165
March 25, 2023
166
March 25, 2023
167
March 25, 2023
168
March 25, 2023
169
March 25, 2023
170
March 25, 2023
171
March 25, 2023
172
March 25, 2023
173
March 25, 2023
174
March 25, 2023
175
March 25, 2023
176
March 25, 2023
177
March 25, 2023
178
March 25, 2023
179
March 25, 2023
180
March 25, 2023
181
March 25, 2023
182
March 25, 2023
183
March 25, 2023
184
March 25, 2023
185
March 25, 2023
186
March 25, 2023
187
March 25, 2023
188
March 25, 2023
189
March 25, 2023
190
March 25, 2023
191
March 25, 2023
192
March 25, 2023
193
March 25, 2023
194
March 25, 2023
195
March 25, 2023
196
March 25, 2023
197
March 25, 2023
198
March 25, 2023
199
March 25, 2023
200
March 25, 2023
201
March 25, 2023
202
March 25, 2023
203
March 25, 2023
204
March 25, 2023
205
March 25, 2023

Hozzászólások

161 15 March 2021, 22:35

Palo M
How do you solder it so cleanly?

17 March 2021, 10:24

Alec K
Super project, taking a seat 👍

17 March 2021, 12:03

Chris Greathouse
Cool! Hopping on for the ride.

17 March 2021, 12:06

Alexander Grivonev
Palo, for all the soldering questions please contact Mr. Bughunter: bughunter
😄

This guy is a magician. Practice and patience in my case, that is all there is.

17 March 2021, 14:05

Spanjaard
base coming along nicely

26 March 2021, 10:21

Steven Van Dyck
Alexander, black marker ink can bleed through paint layers in time, take care that this black won't resurface in some months of time. The pigment particles are smaller than paint pigment and they tend to migrate through them.

26 March 2021, 11:42

Alexander Grivonev
Thanks for the heads up Steven, i will give it a couple of layers of Future to hopefully seal it 👍

26 March 2021, 12:12

Alec K
Man, you don't mess around! Very nice progress 👍

26 March 2021, 12:17

Rui S
Interesting. I'm in 😎

27 March 2021, 11:06

Alexander Grivonev
Join us, portuguese Snow Man

27 March 2021, 11:21

Rui S
Thanks Mate. Nice of you to share by photos your snow study. I see, using that kind of snow product it is prone to simulate a paste that, dosen't attract bugs😉, but instead creates a furry kind of snow 😄 😄 😄 (you have to agree that the pun / quibble is funny?) In the package the "stuff/ed" material is recomended for HO scale? Plan B?

27 March 2021, 11:29

Alexander Grivonev
Right now I am just weighting my options, this was just the first test. Yeah, the snow is for HO scale and should be suitable for 1:72. Don't get me wront it does look really really good but if you zoom in you see the individual fibers. I am considering this one plan B. Next test will be some snow products from AK, pictures following the next days 👍

BTW that pun was awful 😄 😄

27 March 2021, 12:24

Erik De Smet
AK interactive has some nice snow products for dios. I used them for my Dakota crash and Gladiator dios

27 March 2021, 12:27

Rui S
You mean fur, not fibers, right? Sorry Mate, I didn't know that your sense of humor was going so low 😄 😄😄

So you are getting the professional materials on bord? Looking forward for the next tutorial 👍

27 March 2021, 12:29

Alexander Grivonev
Erik I read that first as "AK interactive has some nice products for idiots" 😄😄 They sure do, they really are fool proof and there are even instruction videos on Youtube.

27 March 2021, 16:18

Alexander
Looks really good so far, looking forward to your next snow experiments. 👍

27 March 2021, 18:33

Julian Herrero aka Yuri
Following

27 March 2021, 20:25

Łukasz Gliński
Your test subject looks better than my hangar apron 😄 😄 😄
Loving the snow applicator Mk.5000 👍
Btw. remember you're making a Siberian dio, the snow in such temperatures gets stiff and hard like a stone (checked this out one day in Finland), so it may look a little bit different than a fresh&soft one we get in Mid-Europe.

27 March 2021, 21:42

Alexander Grivonev
Yeah had that in mind too with the snow. Second test subject looks promising! Pics tomorrow.

27 March 2021, 23:06

Martin Oostrom
Summer time is here and I'm feeling chilled to the bone 😉

28 March 2021, 10:31

Rui S
Oh the microballoons..., in my search for snow, I read about them in a model magazine, I think it was n.20 "Art du Modelisme" (no, not this one but has a nice article about snow). They are perfect for this purpose.
The Deluxe materials brand also produces them but they are expensive (so not for me). In that publication they advise to use mask during its application because they are so small that they can be inhaled and are harmful to health.
You can also read about them in this link (beautiful internet):

christinedemerchant...-micro-balloons.html

Perfect. keep it comming mate 👍

28 March 2021, 11:19

Erik De Smet
I told you it is good stuff. And you can mix it with acrylic paint of other AK products to get dirty snow.

28 March 2021, 11:28

Alexander Grivonev
Thought also about breathing this stuff in. Particles that small are never a good thing for the lungs I guess. But thanks to the virus there is an abundance of masks anyway in each household👍

28 March 2021, 12:33

Łukasz Gliński
Wow, that second stuff is very realistic 😮

28 March 2021, 14:02

Alec K
Great result 👍. I am filing this for future use...

28 March 2021, 15:14

Alexander Grivonev
Starting vehicle finished, pictures tomorrow👍

29 March 2021, 18:43

Alexander
Looks very nice already. 👍

29 March 2021, 19:03

Neil
100% following. Gosh. This is amazing work... Love admiring all that PE work and those who build these dioramas. ?

29 March 2021, 19:08

Erik De Smet
The round elastic is a very clever and useful thing for the representation of cables and (fuel) hoses . I guess it can be found in local shops .

29 March 2021, 19:30

Alexander Grivonev
Thx guys.

I liked the cable material too, very "organic" and bendable. Found mine on eBay.

29 March 2021, 19:36

bughunter
Sooo lovely 👍

29 March 2021, 20:55

Andy Ball
Running out of superlatives to support your posts - so will just say this is a terrific addition to show off the Fiddler.

29 March 2021, 21:02

Alexander Grivonev
The truck is finished, all the pics in an separate album: APA-5D Airfield Service Vehicle | Album by Alex G. (1:72)

30 March 2021, 19:04

Alexander Grivonev
The next piece of the diorama puzzle completed!

1 April 2021, 12:32

Raphael Bernecole
Great construction, very beautiful model, great technical mastery. I like it ! , Congratulations !😉

1 April 2021, 12:39

Rui S
Getting better all the way 👍

1 April 2021, 13:22

Spanjaard
wow. the ladder is just the perfect icing for this amazing cake!

1 April 2021, 13:25

Alexander
Awesome scratch detail work on the ladder - looks very realistic and adds greatly to both the size of the model as well as the overall appearance in a diorama! 👍 👍 👍

1 April 2021, 13:49

Thomas Espe
Amazing work on the ladder, really good work

1 April 2021, 15:36

Andy Ball
Disappointed though, that you didn't feature the semi naked Soviet technician from the photos! Splendid finale however!

1 April 2021, 20:30

Alexander Grivonev
Don't tempt me Andy, the ladder wasn't planned either from the beginning 😄😄

1 April 2021, 20:44

Alec K
Ladder is excellent, as comrades above have already mentioned, lack of perforation and semi nakedness notwithstanding 👍

1 April 2021, 23:04

Christian Bruer
I like this Heavy Metal 👍

7 April 2021, 18:36

David Taylor
Fantastic.

7 April 2021, 19:15

Alexander Grivonev
Hello Mates, Sorry for the lack of updates lately, but I am desperately waiting for some diorama figures to arrive in the mail. The post of Mother Russia is awfully slow these days. At the latest next winter the diorama will be finished, I promise😄

6 May 2021, 18:46

Hanno Kleinecke
That is a truely breathtaking piece of work. NMF at its best, fantastic attention to detail
in every respect 👍

6 May 2021, 19:09

Urban Gardini
Love you work and dedication to the project. Nice ideas and it'll be a sight when it's done. I'm late to the show but now I'm here following the home stretch!

6 May 2021, 19:20

Alexander Grivonev
Thx mates. Urban, you are far from late to the show. The project is still in progress! Still waiting for a parcel from Mother Russia with figures for the dio.

31 May 2021, 10:54

Urban Gardini
Either way I'm here now and enjoying it fully!

31 May 2021, 16:01

Николай Дом
Грандиозный проект, смотрю с восхищением.

5 June 2021, 10:43

Alexander Grivonev
I can not believe two years have passed but I finally made the last pictures and can show the completion of this project!

21 March 2023, 09:22

Bernd Grün
I have no words for the superlatives of your skills and the diorama. Hats off! 👌👌👌

22 March 2023, 10:52

DerMattes
Fantastic Work, the ladder alone is a stunning model all in itself!

22 March 2023, 11:10

Łukasz Gliński
What a gang! 😁

22 March 2023, 11:29

Живко Джаков
Are unique! Thanks for the good description of the snow. The selection of figures is very cool. I also suffer from a lack of the right people, that's why I regularly don't even think about whether I'm putting dagi at all.

22 March 2023, 11:55

Alexander Grivonev
thx mates!

@Bernd: I wouldn't go that far calling my skills "superlative", but I am flattered, very kind of you 😄
@DerMattes: the ladder was quite a bit of work but it was worth it in the end and I also like the result, thanks!
@Живко: it was surprisingly hard to find proper figures, like I said they were from many different sets and had to be modified to fit the dio and my ideas

22 March 2023, 19:07

Vincent
Very impressive build. The scratchbuild detail looks great as do the snow effects.

23 March 2023, 10:58

Alexander Grivonev
Thx Vincent! I broadened my horizon with this project and am too quite happy with the result. Final pictures following

23 March 2023, 19:58

Alexander Grivonev
Final reveal guys, tell me what you think. All kinds of criticism please, positive or negative 👍

25 March 2023, 11:44

Sven Schönyan
Very nicely done!

Again makes me want to build this NMF giant, too!

25 March 2023, 12:01

Andy Ball
Well I remember our discussions a few years ago whilst you were building/correcting your Trumpeter kit and I was doing mine. It's great to see the enhancements made by the diorama and support vehicles.
Outstanding!!

25 March 2023, 12:03

Alec K
Outstanding work Alex. The tarmac looks a bit too new, that's the only thing that jumped out at me. The models are done to perfection, I love the figure work as well 👍

25 March 2023, 12:34

Alexander
Speechless, I don't know where to start - from an unusual plane topic and the superb construction of what seems to be a difficult and inaccurate kit, to the detailed and lively looking diorama with great snow effects!
👍👍👍

If you want some 'negative' criticism too, then I could think of only two things:
1) perhaps the snow could be more colorful in some areas. Maybe something like oil/fuel staining, or anything to make it a bit more interesing. Perhaps also some areas where the snow melted, only to freeze again to form a mixture of snow and ice
2) maybe also some snow or ice on the plane itself, at least in areas where its hard to remove it

But those are very nitpicky and minor things that might also be subjective. In any case, this is definitely an eye catcher!

25 March 2023, 13:51

Finn
Well done indeed!

25 March 2023, 16:19

Curatorm
Awesome.

25 March 2023, 16:56

bughunter
Grand finale 👍

25 March 2023, 17:21

Guy Rump
Beautiful modelling and dio. 👍

25 March 2023, 17:32

Mark K
Fantastic work!

25 March 2023, 17:36

Spanjaard
What a fantastic job

25 March 2023, 20:55

Живко Джаков
So. I said a bit above that I admire the choice of figures. The plane is very good. I can't make one. The staircase is unique. The concrete looks very clean. There are no signs of wear, and in the north the conditions are harsh and destroy it a lot. I would do it in patches. The snow is very white. If we assume that the moment is shortly after snowfall, it happens. But there is one but. Then there should be no old snow in front of the plane. If I have old snow somewhere, it should be at least a little dirty. The truck is very clean. Russian military equipment, even new, is not that clean. The one that stays in the garages and is taken out once a year too. In addition, during the winter, military equipment is not cleaned as often. Yes, it is not muddy, but there is a lot of sand on it from the roads. You wanted criticism, that's from me and my experience with snow and military trucks.
However, this does not mean that the work is bad. I admire her.

25 March 2023, 21:18

Alexander Grivonev
Thx guys for the replies, was interesting to hear different opinions! Truck is definitely too clean!

30 March 2023, 13:09

Ekki
Very, very good work!

30 March 2023, 17:56

Oliver Zwiener
State of the art !

2 April 2023, 15:07

Andy Ball
You take it upwards and upward Alex. Stratospheric mate!

2 April 2023, 18:43

Thomas S.
Just excellent, looks fantastic!

3 May 2023, 15:08

Alexander Grivonev
Thx a lot mates, that was a challenging but fun project. Went definitely beyond my comfort zone. Many new techniques were learned and applied

4 May 2023, 09:41