makett adatbázis | polc kezelés
Tug Benson
Erik Leijdens (Tug Benson)
NL

Dutch East Indies interceptor

Hozzászólások

52 3 January 2022, 20:31
Erik Leijdens
A much awaited kit for ML-KNIL enthusiasts! This kit arrived today, had to start it immediately! This particular box is one of 100 pieces made for the Dutch IPMS show "Euro Scale modelling" which was unfortunately cancelled. The kits were to be sold at the show but after the cancellation they could be purchased from Dora's website! A second edition with nicer artwork will be released this year. Also a "A" version too, which has a different undercarriage. The plastic looks very good, a bit soft maybe but sharply moulded with no flash at all. Let's see how it builds up! 💪🏻
3 January 2022, 20:34
Jos Jansen
This will be another stunner from your hand Erik...👍!
3 January 2022, 22:34
Ben M
Watching with interest
3 January 2022, 22:38
Erik Leijdens
Welcome Jos and Ben! Started to add some rivets, a first time for me.
4 January 2022, 21:09
Boris B
Hi Erik, I'll be following this build too. I'm building DW's Percival Vega Gull and find it a bit disappointing (too many parts, many approximations, useless PE), but it looks like the quality of their kits is improving !
21 January 2022, 14:32
David R. Meizoso
Following! First time with rivet wheel may be pretty scary, but you achieved a nice and clean result.
21 January 2022, 15:33
Jan Peters
Oooh, that is one nice kit! Following this!
21 January 2022, 15:35
Matthias Schoenegge
I would like to ask: Is the whole kit a limited edition or is it a "normal" kit with extra decals or parts?
21 January 2022, 15:50
Robert Podkoński
Watching, of course!
21 January 2022, 16:18
Guy Rump
Following 👍
21 January 2022, 16:32
Erik Leijdens
Thanks Boris, David, Jan, Matthias, Robert and Guy!
@Boris, well yes it looks quite good. Nice dark grey plastic, a bit on the soft side but looks much better than the earlier DW kits. Although the engineering is a bit odd on some places and the instructions are a bit vague, especially on the mlg bay area.
@David R, my first time! But I'm a bit on hold now since I'll have to rivet the fuselage now, which is very much round so mych more difficult than the wing area! I think i'll assamble the fuselage together first and after the rivets. The fuselage is much sturdier when the halves are put together.
@Matthias, this kit is limited to 100 boxes but very soon Dora will release the final version of this kit!
24 January 2022, 20:05
Ben M
How are you adding rivets? In 1/32 and 1/35 I've used the heads of pins as rivets, somehow I think you will not be taking this approach 🙂
24 January 2022, 23:57
Erik Leijdens
No indeed Ben, I'm using Rosie the Riveter 0,6mm. A very handy tool!
25 January 2022, 06:42
Erik Leijdens
I think there is a flaw in the instructions. If you put part F13 and 14 in the place as Dora Wings wants then in my opinion the wheel leg mounting point is too deep. The instructions don't show that notch either. Only a notch on the part at the front but that is a hole in real life. If I dry fit with the wheel leg it does indeed look like the parts F13 and 14 do not turn over. Of course, I only found this out AFTER I had already glued them in place like Dora wants! On picture 11 they are in the right place imo. Nice kit, vague instructions!
17 February 2022, 22:13
Ben M
Thanks for documenting this. I always appreciate tips on builds!
18 February 2022, 00:29
Erik Leijdens
Dryfit looks promising. Only the partial seam of the wing-fuselage is not in such a convenient place I think!
20 February 2022, 16:28
Erik Leijdens
Sprayed the cockpit aluminium, as was the standard for KNIL CW-21s
24 February 2022, 22:10
Boris B
I like the look of your painted cockpit. The wash seems just right to my eye.
If I can risk a few bits of advice or things to try on your next build, I would thin the seat walls to the scale-equivalent of folded metal (a quick job that makes a big difference), and bend the 'L' end of the shoulder harness buckles 90 degrees. Also, if your control stick is glued askew, the corresponding flight controls (on wings and/or tailplanes) should match that.
These are just my pet peeves, of course !
25 February 2022, 13:03
Erik Leijdens
Thanks for your reply Boris! Yes the seat thickness is not really on scale but the canopy will be closed anyway so I think it will not be that clear once it's done. I think I don't really understand what you mean with the end of the shoulder buckles? 90 degrees to what side? Nothing is mentioned in Eduards instructions too. I deliberately glued the control stick in a askew position since the elevators are separate pieces, which off course will be placed in the corresponding position too.🙂
25 February 2022, 14:52
Boris B
The instructions are available for this set, but it's the same for all USAAF seatbelts of the period : Seatbelts USAAF WWII (Eduard FE817, 1:48)

FE817
 
25 February 2022, 15:41
Boris B
The end part of the shoulder buckles are placed together and inserted into the lap belt buckles to lock them together.
25 February 2022, 15:43
Erik Leijdens
Ah yes I see. Will bend it!
25 February 2022, 16:46
Erik Leijdens
Another model that resides on the "in progress shelf", gonna pick this one up too ☺️
22 March 2023, 14:03
Jan Peters
Promises promises 😁
22 March 2023, 14:21
Erik Leijdens
Jan, 😝
22 March 2023, 14:24
Erik Leijdens
Added some decals! I have used decals from Dutch Decals sheet DD48081
5 May 2023, 21:04
Jan Peters
Good to see some progress on this one again!
6 May 2023, 04:18
Robert Podkoński
Indeed. Looks fantastic already!
6 May 2023, 06:56
Ben M
The exterior painting and the cockpit look great.
6 May 2023, 13:12
Erik Leijdens
Thanks mates 😃
6 May 2023, 15:59
Erik Leijdens
Added a home made brown wash, want to keep it subtle.
10 May 2023, 20:27
Vincent
Very intersting plane and scheme. great work until now!!!
11 May 2023, 07:50
Jan Peters
Looking good Erik 👍🏻
11 May 2023, 07:59
Jakub Fiala
Oh, that ,,fit´´ of the wheel bays parts...
Great work with the riveting wheel and with the airbrush, Erik! 👍
17 May 2023, 08:54
Erik Leijdens
Thanks Vincent, Jan and Jakub. I have added Matt coat and added a couple of gun barrels. Reaching the finish line soon
18 May 2023, 06:52
Ricardo Reis
Very nice and unusual! 👍
20 May 2023, 22:27
Ben M
Looks great, Erik.
20 May 2023, 23:51
Jan Peters
I agree with Ben, looking great!
21 May 2023, 05:33
Jos Jansen
Great build Erik, really a nice piece of our national aviation history 👍!
21 May 2023, 05:50
Guy Rump
Great build! 👍
21 May 2023, 06:59
Curatorm
Very fine work, beautiful model.
21 May 2023, 07:49
Neuling
Yes! Wonderful colors.
21 May 2023, 08:39
Pietro De Angelis
Very nice job, congrats!
21 May 2023, 08:41
Robert Podkoński
Beautiful indeed!
21 May 2023, 10:43
Marcin Terlikowski
Very nice paint job and great pair of warbirds. Both CW-21 Chineese Army and P-36 Pearl Harbour are waitnig in my queue.. Of course watching....
21 May 2023, 13:11
Patrick Hagelstein
That's an interesting bird! 👍 Nice subdued shading and weathering!
21 May 2023, 13:17
Jan Peters
It turned out great Erik, so kudos to you as well for making it as good as it gets 👍🏻
28 May 2023, 10:32
Erik Leijdens
Thanks Jan 💪🏻
28 May 2023, 15:14
Erik Leijdens
This one needed some proper end pictures too, added a few.
26 July 2023, 14:02
Jan Peters
Once again, excellent job all'round 👍🏻
26 July 2023, 14:51
Ben M
Looks great!
26 July 2023, 15:07
Erik Leijdens
Thanks guys!
26 July 2023, 22:40
John
Beautiful paintwork!
26 July 2023, 22:51
Guy Rump
Lovely build, congrats! 👍
27 July 2023, 10:00
Erik Leijdens
Thanks John and Guy!
27 July 2023, 20:41

Album info

A much awaited kit for ML-KNIL enthusiasts! This kit arrived today, had to start it immediately!

42 képek
1:48
Befejezve
1:48 Curtiss-Wright CW-21b Interceptor (Dora Wings DW48000)1:48 Bolkow, SeaHawk, Interceptor, F-86F (Dutch Decal DD48081)

Összes album

Összes album megtekintése »