A-6 "Intruder" , EA-6 "Prowler" wheels set

ResKit | N. RS32-0001 | 1:32

I fatti

Marca:: ResKit
Titolo:: A-6 "Intruder" , EA-6 "Prowler" wheels set
Numero:: RS32-0001
Scala:: 1:32
Digita:: Set di dettagli
Messo in commercio:: 2020 Nuovo stampo
Codice a barre:: 4589913295353 (EAN)
Argomento:: Grumman A-6 Intruder » Aviogetti (Aereo)

Progettato per

Questo set aftermarket è progettato per:

Trumpeter

2013

Nuovo stampo

Mercato

Negozi online

USD 14.85Disponibile »

€ 13.52

USD 15.59Disponibile »

SKU alternativi per ResKit RS32-0001:
RS320001 | 32-0001 | RES-RS32-0001 | RESRS320001

Nota: Prezzi e disponibilità sono solo indicazioni. Controlla anche che il prodotto corrisponda effettivamente!

Recensioni in-box

Revisioni esterne

Non sappiamo se vi siano recensioni per questo (kit) A-6 "Intruder" , EA-6 "Prowler" wheels set (#RS32-0001) da ResKit.

Commenti

Jon Somerville
The holes for the wheels do not line up for the only kit in 1/32. My guess is that these are accurate to the real thing and not designed to fit the kit. So which do you prefer? I would have liked to see if fit the kit. Used drill bits to match a fitting hole to the original wheel parts and then drilled out the resin. The cut line to remove the casting block for the front wheels are correct, but not the mains.

All comments (10) » 1 19 April 2021, 15:43

Jon Somerville
I bought the MERs from ResKit. That was the one thing I was glad about that I waited so long before finishing the kit. Toyed with the idea of fixing the tail comb myself, but was going to be too much work for only a little gain.
Other issues with the kit is where the aft side of where the nose gear joins the fuselage is way to deep into the gear bay. The wing fences are not in the correct spot and the fuselage has way too many rivets. I filled the rivets where needed. If they ghost a bit, that's okay too.

19 December 2023, 13:44

Jon Somerville
Now that I re-read the last line in the review should really be "The cut line to remove the casting block for the front wheels hubs is correct, but not the mains." So referring to the hubs not the wheels themselves.

25 January, 17:38

Materiale di riferimento

Grumman A-6 Intruder (Phoenix Scale Publications 18)

Grumman A-6 Intruder Airmark in Profile & Scale

Modellers Airguide N. 18

Andy Evans

2024

A-6 Intruder In U. S. Marine Corps Service and Navy Test & Evaluation Squ...

Colors & Markings Series N. 7

Rock Roszak, Mike Heideman

2023

Tutti i libri » (28 in totale) Tutti i walkaround (immagini dei dettagli) » (15 in totale)