Novità
Derek Post
articolo contrassegnato come in ordine
articolo contrassegnato come in ordine
Spitfire Early Style Control Column Fitted to A wing Spitfires with 8 machine guns. For Airfix, Eduard, Tamiya
Barracuda Studios 1:48
BR48505 2023 Nuovo stampo 28 July, 15:25
Derek Post
articolo contrassegnato come in ordine
articolo contrassegnato come in ordine
MiG-21 Radome Upgrade Set Set contains 1 accurate resin radome and separate bulkhead....
Barracuda Studios 1:48
BR48294 2016 Nuovo stampo 28 July, 15:24
Simon Nagorsnik
aggiunto un nuovo album fotografico.
aggiunto un nuovo album fotografico.
25 immagini
1:72 E-75 s.Pz.Jg Ausf.M 10,5cm L/62Nuovo: 28 July, 14:27 1:72
Progetto: 1:72 E-75 s.Pz.Jg Ausf.M 10,5cm L/62
13 13 July, 06:57
Tom B.
Another Simon-build? I´m in! The suspension on those Modelcollect E-50/75 kits is kind of fiddling intensive, at least when I remember building an E-50 years ago (albeit with quite a lack in modelling-experience)...
Another Simon-build? I´m in! The suspension on those Modelcollect E-50/75 kits is kind of fiddling intensive, at least when I remember building an E-50 years ago (albeit with quite a lack in modelling-experience)...
13 July, 10:30
Simon Nagorsnik
Hi Tom! For sure, you`re welcome too 😁
I have already read a lot about the lack of engineering performance of the Modelcollect kits in terms of accuracy of fit and executability and the E-series confirms this. Caution is advised!
But in my case, the E-Series projects are just a good way to try out and refine techniques ans skills- only "semi-serious" projects 😏
Hi Tom! For sure, you`re welcome too 😁
I have already read a lot about the lack of engineering performance of the Modelcollect kits in terms of accuracy of fit and executability and the E-series confirms this. Caution is advised!
But in my case, the E-Series projects are just a good way to try out and refine techniques ans skills- only "semi-serious" projects 😏
13 July, 10:46
Simon Nagorsnik
My E-series will be further expanded... 😁
You´re welcome and thanks a lot Zsolt!!
And thanks for the likes too!
My E-series will be further expanded... 😁
You´re welcome and thanks a lot Zsolt!!
And thanks for the likes too!
28 July, 14:33
Bernhard Schrock
aggiunto un nuovo album fotografico.
aggiunto un nuovo album fotografico.
115 30 March, 15:44
Bernhard Schrock
You are welcome. As usual a lot of first rows free! Popcorn for all! 🙂
You are welcome. As usual a lot of first rows free! Popcorn for all! 🙂
3 April, 05:00
bughunter
What a combination: a great new kit, nice accessories and finally a master modeller at the tools - EPIC !
What a combination: a great new kit, nice accessories and finally a master modeller at the tools - EPIC !
10 April, 16:20
Bernhard Schrock
Thank you JAM-SCREW.
Btw: just I saw you actual portfolio of sets for the Seaking! SCM Brand: JAM-SCREW
Absolutely remarkable!! I'm looking forward especially for the landing gear and main rotor hub. 🙂
Thank you JAM-SCREW.
Btw: just I saw you actual portfolio of sets for the Seaking! SCM Brand: JAM-SCREW
Absolutely remarkable!! I'm looking forward especially for the landing gear and main rotor hub. 🙂
12 April, 05:52
Hanno Kleinecke
Just look at that winchframe !!! There is absolutely no doubt that after plugging these plugs the winch will be working. As with all your builds, for the watchers the path is the destination.
Wonderful wip pics - keep'em coming…… 🙂 👍
Just look at that winchframe !!! There is absolutely no doubt that after plugging these plugs the winch will be working. As with all your builds, for the watchers the path is the destination.
Wonderful wip pics - keep'em coming…… 🙂 👍
18 April, 05:02
JAM-SCREW
Rapid progress sir! Very impressive attention to even very fine details for accuracy. Thank you for the updates and images.
Rapid progress sir! Very impressive attention to even very fine details for accuracy. Thank you for the updates and images.
22 April, 17:06
Bernhard Schrock
Michael ureol is A kind of foamed plastic. It comes in different degrees of foaming. The more foamed, the softer and lighter.
Michael ureol is A kind of foamed plastic. It comes in different degrees of foaming. The more foamed, the softer and lighter.
29 April, 09:32
Robert
Hallo sieht genial aus.
wo bekommt man sowas ? habe auch schon versucht sowas zu finden.
Hallo sieht genial aus.
wo bekommt man sowas ? habe auch schon versucht sowas zu finden.
29 April, 09:39
Michael Kohl
Ah, that explaines as well the nice texture the cushions have. Thanks for the info.
And - by the way - as always a pleasure to follow your delicate modelling.
Ah, that explaines as well the nice texture the cushions have. Thanks for the info.
And - by the way - as always a pleasure to follow your delicate modelling.
29 April, 10:43
Bernhard Schrock
Your are welcome.
Robert: vor paar Jahren habe ich von einem Modellbaubekannten Reste zum probieren gekriegt. Daher musste ich erst mal schauen, wo man das kriegt: eBay hier und da so wie bei Modulor in Berlin.
Your are welcome.
Robert: vor paar Jahren habe ich von einem Modellbaubekannten Reste zum probieren gekriegt. Daher musste ich erst mal schauen, wo man das kriegt: eBay hier und da so wie bei Modulor in Berlin.
29 April, 13:08
Gordon Sørensen
Great looking detail you are adding, Berhard! Those seat cushions are fantastic.
Great looking detail you are adding, Berhard! Those seat cushions are fantastic.
29 April, 13:27
Florian H.
Vergiss nicht, einen Kasten Bier bereitzustellen, wenn du die bordtoilette nutzt 😉
Vergiss nicht, einen Kasten Bier bereitzustellen, wenn du die bordtoilette nutzt 😉
29 April, 17:47
Bernhard Schrock
Thanks for comments and praise.I would like to share the praise with the excellent photographers (TN and BD). Ä Only such photos as from TN and BD make it possible.🙂
Thanks for comments and praise.I would like to share the praise with the excellent photographers (TN and BD). Ä Only such photos as from TN and BD make it possible.🙂
2 May, 16:10
bughunter
It was probably difficult to wire all the little rotary switches on the back. I assume that they all work!
It was probably difficult to wire all the little rotary switches on the back. I assume that they all work!
8 May, 09:42
Dan Parsons
Just absolutely fantastic Bernhard, I dont think everyone will appreciate just how difficult all those details you have added are to do. you have achieved what I only dreamed of achieving. I am lost for words with these details. Stunningly beautiful work.
Just absolutely fantastic Bernhard, I dont think everyone will appreciate just how difficult all those details you have added are to do. you have achieved what I only dreamed of achieving. I am lost for words with these details. Stunningly beautiful work.
8 May, 09:45
Bernhard Schrock
Thank you David, bughunter and Dan for you very motivating comments🙂. The Seaking is meanwhile my favorite helicopter. It was great to see one of them flying over the beach in Boltenhagen: we went on vacation there last year.🙂🙂
Thank you David, bughunter and Dan for you very motivating comments🙂. The Seaking is meanwhile my favorite helicopter. It was great to see one of them flying over the beach in Boltenhagen: we went on vacation there last year.🙂🙂
8 May, 15:13
Bruce Huxtable
I am impressed not only by your skills, Bernard, but also that you are not over-whelmed by the many, many fine details that you are taking on. RESPECT 🙂
I am impressed not only by your skills, Bernard, but also that you are not over-whelmed by the many, many fine details that you are taking on. RESPECT 🙂
8 May, 16:25
Hanno Kleinecke
Last monday I had the chance to take a very close look on all these masterpiece subassemblies in person - an all new level of depth in detail, even by Bernhard's standards !
These oxygen bottles look as if they were very closely related to 500 pound bombs….. ? 🙂
Last monday I had the chance to take a very close look on all these masterpiece subassemblies in person - an all new level of depth in detail, even by Bernhard's standards !
These oxygen bottles look as if they were very closely related to 500 pound bombs….. ? 🙂
18 May, 20:01
Bernhard Schrock
I'm happy that you like my bottles... 🙂. In fact, I have often used bombs as a basis for various parts. 🙂 This time, however, it is a sprue with a diameter of 4 mm.
I'm happy that you like my bottles... 🙂. In fact, I have often used bombs as a basis for various parts. 🙂 This time, however, it is a sprue with a diameter of 4 mm.
19 May, 06:17
gorby
The level of detail is mad. amongst the best scratch-building I have ever seen on Scalemates.
The level of detail is mad. amongst the best scratch-building I have ever seen on Scalemates.
26 May, 14:27
Alec K
Excellent progress. I like how in Germany, when helicopter model parts get mailed, one just has to write "Bernhard" on the box and it gets delivered to the right person… 😉 😄
Excellent progress. I like how in Germany, when helicopter model parts get mailed, one just has to write "Bernhard" on the box and it gets delivered to the right person… 😉 😄
27 May, 12:21
Hanno Kleinecke
I'm out of superlatives ! What can one say - you are constantly exceeding your own standards with this build, and that really says something !
Deeply stunned and impressed by your R.O. workstation !
I'm out of superlatives ! What can one say - you are constantly exceeding your own standards with this build, and that really says something !
Deeply stunned and impressed by your R.O. workstation !
27 May, 18:33
JAM-SCREW
Well, first test is passed - package arrived. Second test passed looks in good condition. 😋. Now is the real test. How does the builder feel about the parts and are they suitable for this unbelievably excellent project.... time will tell.🍻
Well, first test is passed - package arrived. Second test passed looks in good condition. 😋. Now is the real test. How does the builder feel about the parts and are they suitable for this unbelievably excellent project.... time will tell.🍻
28 May, 07:02
David Taylor
JAM-SCREW.How big is your production facilities,you might need bigger premises as your products look great albeit in the hands of a master modeller.
JAM-SCREW.How big is your production facilities,you might need bigger premises as your products look great albeit in the hands of a master modeller.
28 May, 14:28
bughunter
Wow, again every little sub-assembly is a fine model on it's own - fantastic 👍
Wow, again every little sub-assembly is a fine model on it's own - fantastic 👍
30 May, 14:44
Bernhard Schrock
Thx for you feedback 🙂🙂
The entire interior is lined with upholstery, which is primarily used for noise-insulation. Until yesterday, I broke my head because I didn't know how to repicate it… After a conversation with a mate (thx Hanno), the brilliant idea came to me: Fimo clay.
The material can be processed excellently and is solid in the oven after 30 minutes at 130°. The most important thing is that it does not become bone-hard but left elastic and can even be sanded.
Thx for you feedback 🙂🙂
The entire interior is lined with upholstery, which is primarily used for noise-insulation. Until yesterday, I broke my head because I didn't know how to repicate it… After a conversation with a mate (thx Hanno), the brilliant idea came to me: Fimo clay.
The material can be processed excellently and is solid in the oven after 30 minutes at 130°. The most important thing is that it does not become bone-hard but left elastic and can even be sanded.
1 June, 08:20
Michael Kohl
150 pics and you didn't even close the fuselage. And not a second of dullness. Finest modelling entertainment. 🙂
150 pics and you didn't even close the fuselage. And not a second of dullness. Finest modelling entertainment. 🙂
4 June, 17:09
Bernhard Schrock
This morning I was curious and unpacked the chassis of Jam-Screw. As already written, the quality is outstanding. But everything is so filigree that you have to be very careful and not to break anything when handling. I had to improvise a bit here and there. In the end, I was finished after 2 hours. Including preparation for laying the cables.
This morning I was curious and unpacked the chassis of Jam-Screw. As already written, the quality is outstanding. But everything is so filigree that you have to be very careful and not to break anything when handling. I had to improvise a bit here and there. In the end, I was finished after 2 hours. Including preparation for laying the cables.
8 June, 18:37
Tom Spiegelberg
Der Baufortschritt ist echt sehenswert und beeindruckend Bernhard. Die Bilder vom Innenraum von Dir und Thomas sind toll! Es gibt leider sehr wenig Bilder vom Original und sind eine tolle Vorlage. Vielleicht macht ihr nen extra Walkaround hier. Ich freue mich schon auf die nächsten Bilder.
Der Baufortschritt ist echt sehenswert und beeindruckend Bernhard. Die Bilder vom Innenraum von Dir und Thomas sind toll! Es gibt leider sehr wenig Bilder vom Original und sind eine tolle Vorlage. Vielleicht macht ihr nen extra Walkaround hier. Ich freue mich schon auf die nächsten Bilder.
9 June, 15:13
Bernhard Schrock
Danke fürs Lob Tom. 🙂. Dank der hervorragenden Innenraum-Fotos macht es wirklich sehr viel Freude herumzupuzzeln. Mein Seaking Projekt hat, könnte man sagen, eine „kritische Masse" erreicht. Dank diversen Kontakten zu Hubschrauber-Spezialisten, und ehemaligem Wart und nunmehr der Connection zur Jam-Screw habe ich die Möglichkeit offene Fragen auch dort zu klären. Für seine CAD files hat JS / Andy und seine Leute hunderte von Fotos geschossen, zu den ein normaler Sterblicher keinen Zugang hat.
Deinen Vorschlag werde ich an Thomas weiterleiten. Deine Idee ist sehr gut.🙂
Danke fürs Lob Tom. 🙂. Dank der hervorragenden Innenraum-Fotos macht es wirklich sehr viel Freude herumzupuzzeln. Mein Seaking Projekt hat, könnte man sagen, eine „kritische Masse" erreicht. Dank diversen Kontakten zu Hubschrauber-Spezialisten, und ehemaligem Wart und nunmehr der Connection zur Jam-Screw habe ich die Möglichkeit offene Fragen auch dort zu klären. Für seine CAD files hat JS / Andy und seine Leute hunderte von Fotos geschossen, zu den ein normaler Sterblicher keinen Zugang hat.
Deinen Vorschlag werde ich an Thomas weiterleiten. Deine Idee ist sehr gut.🙂
10 June, 08:18
Dietmar Bogatzki
Wahnsinn was du da reingesteckt hast allein die Instrumente und Sitze sind schon ne Show
Wahnsinn was du da reingesteckt hast allein die Instrumente und Sitze sind schon ne Show
17 June, 07:25
Bernhard Schrock
Thank you for the big praise. I am very happy to have such a large number of fans of this WIP.🙂🙂
Dietmar: nur dank der Unterstützung von einer Handvoll von Mk-41 Fans ist es mir möglich so tief in die Materie einzutauchen.
Übrigens: Ganz am Anfang wollte ich die Türen offen lassen und nur ein „bisschen" im Inneren tun. Aber als ich die Fotos von Thomas betrachtet habe, bin ich „getürmt und hab mich auf dem Boden versteckt". Irgendwann habe ich jedoch den „Zustand der inneren Ruhe" (die Phase wenn ich kein Problem mehr damit habe mich z.B. mit einem Rucksack aus Fimo eine halbe Stunde zu beschäftigen)🙂🙂 und betrachte es inzwischen als eine Herausforderung, wieviel ich von dem Zeug nachbauen kann.
Thank you for the big praise. I am very happy to have such a large number of fans of this WIP.🙂🙂
Dietmar: nur dank der Unterstützung von einer Handvoll von Mk-41 Fans ist es mir möglich so tief in die Materie einzutauchen.
Übrigens: Ganz am Anfang wollte ich die Türen offen lassen und nur ein „bisschen" im Inneren tun. Aber als ich die Fotos von Thomas betrachtet habe, bin ich „getürmt und hab mich auf dem Boden versteckt". Irgendwann habe ich jedoch den „Zustand der inneren Ruhe" (die Phase wenn ich kein Problem mehr damit habe mich z.B. mit einem Rucksack aus Fimo eine halbe Stunde zu beschäftigen)🙂🙂 und betrachte es inzwischen als eine Herausforderung, wieviel ich von dem Zeug nachbauen kann.
17 June, 18:24
JAM-SCREW
Very exciting to see what can be achieved with even a very good kit. Commitment and patience wonderful recipe for outstanding success. A pleasure to go along for this journey.
Very exciting to see what can be achieved with even a very good kit. Commitment and patience wonderful recipe for outstanding success. A pleasure to go along for this journey.
18 June, 08:41
Bernhard Schrock
Thank you for your unique and supportive comments !🙂🙂
It's a usual business copymashine/printer in tower design, Minolta serie 7.
Thank you for your unique and supportive comments !🙂🙂
It's a usual business copymashine/printer in tower design, Minolta serie 7.
18 June, 18:03
Bruce Huxtable
The interior is a delight to the eye, for sure. Inspirational modelling🙂
The interior is a delight to the eye, for sure. Inspirational modelling🙂
18 June, 18:28
Bernhard Schrock
🙂🙂.
The last big point for interior components is completed: rack for electronic equipment & foldable seat.
🙂🙂.
The last big point for interior components is completed: rack for electronic equipment & foldable seat.
26 June, 12:27
CaptGPF
God God! I'm just amazed how much scratch built detail you put into this build with each passing day!
God God! I'm just amazed how much scratch built detail you put into this build with each passing day!
30 June, 02:56
Bernhard Schrock
A waterproof green rubber mat is laid on the cabin floor of the SeaKings of the German Navy. However, not under the equipment rack and not in the area of the „shower cabin" (radaroperator workstation). There, the rubber mat was left out, shortened and folded upwards.
At the points of the mountingpoints and other hatches, access covers (probably also made of rubber) are incorporated into the rubber mat.
A waterproof green rubber mat is laid on the cabin floor of the SeaKings of the German Navy. However, not under the equipment rack and not in the area of the „shower cabin" (radaroperator workstation). There, the rubber mat was left out, shortened and folded upwards.
At the points of the mountingpoints and other hatches, access covers (probably also made of rubber) are incorporated into the rubber mat.
30 June, 12:13
Spanjaard
i really love the details of the rack for electronic equipment & foldable seat.
i really love the details of the rack for electronic equipment & foldable seat.
30 June, 19:07
Hanno Kleinecke
The lecture continues ! Altough it's a pity to partially hide all these wonderful details in the closing halves, I'm curious !
The lecture continues ! Altough it's a pity to partially hide all these wonderful details in the closing halves, I'm curious !
5 July, 08:12
Bernhard Schrock
After completing the engine housing I begun today detailing the bottom.
Just as on the fuselage sides, the equipment on the bottom of the Mk41 is different from the british variants.
After completing the engine housing I begun today detailing the bottom.
Just as on the fuselage sides, the equipment on the bottom of the Mk41 is different from the british variants.
10 July, 17:18
Alec K
The level of detailing on this thing is simply too notch. Number of bits you have added must be in the thousands! Masterclass 👍 👍👍
The level of detailing on this thing is simply too notch. Number of bits you have added must be in the thousands! Masterclass 👍 👍👍
14 July, 12:40
Dietmar Bogatzki
Einfach nur Geil.....hast du jede Niete nachgezählt, Bernhard 👍
Liebe solche Modellbauer da komme ich nicht mit
Einfach nur Geil.....hast du jede Niete nachgezählt, Bernhard 👍
Liebe solche Modellbauer da komme ich nicht mit
15 July, 11:19
Hanno Kleinecke
Holy smokes, this is escalating everytime I'm checking the progress here !
The Airfix-guys must be crying for their mama by now…….😄
Holy smokes, this is escalating everytime I'm checking the progress here !
The Airfix-guys must be crying for their mama by now…….😄
15 July, 18:20
Qwertzel
Sehr schöner Innenraum. Ich liebe deine medizinischen Hilfsmittel. Bin selber im Thema drin und kann keinen Unterschied zu den realen Maschinen feststellen. Echt gute Arbeit!
Sehr schöner Innenraum. Ich liebe deine medizinischen Hilfsmittel. Bin selber im Thema drin und kann keinen Unterschied zu den realen Maschinen feststellen. Echt gute Arbeit!
20 July, 16:58
Bernhard Schrock
Thank you for the last wave of such nice comments. I have the last big hurdle to taken: installing clear parts for the cockpit without mess.
Qwertzel: freut mich, dass dir mein Medizin-Equipment gefällt. Du hast erwähnt, dass du selbst sehr dicht dran bist. Hab gesehen dass du auch einen Rettungs Quirl im Bau hast bzw. Eine ganze Menge von Feuerwehrfahrzeugen. Bist du selbst auch im Einsatz? LG B
Thank you for the last wave of such nice comments. I have the last big hurdle to taken: installing clear parts for the cockpit without mess.
Qwertzel: freut mich, dass dir mein Medizin-Equipment gefällt. Du hast erwähnt, dass du selbst sehr dicht dran bist. Hab gesehen dass du auch einen Rettungs Quirl im Bau hast bzw. Eine ganze Menge von Feuerwehrfahrzeugen. Bist du selbst auch im Einsatz? LG B
20 July, 18:26
Qwertzel
Ja, kann man so sagen. Bin seit mehreren Jahren bei der freiwilligen Feuerwehr, bei den Maltesern und beim DRK im Sanitätsdienst und Katastrophenschutz. Ab einem gewissen Punkt ist das ganze Rettungswesen eher eine Lebenseinstellung, anstelle eines Hobbys
Ja, kann man so sagen. Bin seit mehreren Jahren bei der freiwilligen Feuerwehr, bei den Maltesern und beim DRK im Sanitätsdienst und Katastrophenschutz. Ab einem gewissen Punkt ist das ganze Rettungswesen eher eine Lebenseinstellung, anstelle eines Hobbys
20 July, 20:23
Alec K
… and they are in place, flawlessly installed. I admire your precision, truly excellent 👍
… and they are in place, flawlessly installed. I admire your precision, truly excellent 👍
27 July, 13:22
Bernhard Schrock
Thank you Alec: Your comment honors me very much.
Today morning I worked on the nose, installed several parts of SeMa Models And finally the „thing" looks like a Mk41. 🙂
Thank you Alec: Your comment honors me very much.
Today morning I worked on the nose, installed several parts of SeMa Models And finally the „thing" looks like a Mk41. 🙂
28 July, 11:23
Stefan L.
aggiunto un nuovo album fotografico.
aggiunto un nuovo album fotografico.
85 immagini
Messerschmitt BF 109-E7 from 7/JG 26Nuovo: 28 July, 15:12 1:48
Progetto: Messerschmitt BF 109-E7
51 14 July 2023, 21:33
Christian
Hallo Stefan, hab das selbe Modell im Regal. Bin gespannt wie deine wird, soweit schaut das richtig vielversprechend aus. Und ich bekomme bei deinen Bildern richtig Lust, den Bau der Messerschmitt ebenfalls zu starten!
Hallo Stefan, hab das selbe Modell im Regal. Bin gespannt wie deine wird, soweit schaut das richtig vielversprechend aus. Und ich bekomme bei deinen Bildern richtig Lust, den Bau der Messerschmitt ebenfalls zu starten!
21 July 2023, 18:10
Stefan L.
@Christian Hallo Christian, bist jetzt sind mir bei dem Modell keinerlei Probleme aufgefallen, alles passt wunderbar zusammen , kann dir nur empfehlen das Modell zu bauen. Selbst wenn das Modell verglichen mit den neuen Tamiya oder Eduard Modellen weniger Details aufweist, macht es sehr viel Spaß diese Details selber hinzuzufügen und selbst wenn man die Details weglässt, ist das Modell sehr schnell gebaut und für den Preis meiner Meinung nach sehr zu empfehlen. Abgesehen davon sind die meisten neuen Bausätze der BF109 von der G Variante und nicht von der E Variante. Hoffentlich kann ich dich mit meinem Bau inspirieren, dein Modell auch anzufangen 🙂
@Christian Hallo Christian, bist jetzt sind mir bei dem Modell keinerlei Probleme aufgefallen, alles passt wunderbar zusammen , kann dir nur empfehlen das Modell zu bauen. Selbst wenn das Modell verglichen mit den neuen Tamiya oder Eduard Modellen weniger Details aufweist, macht es sehr viel Spaß diese Details selber hinzuzufügen und selbst wenn man die Details weglässt, ist das Modell sehr schnell gebaut und für den Preis meiner Meinung nach sehr zu empfehlen. Abgesehen davon sind die meisten neuen Bausätze der BF109 von der G Variante und nicht von der E Variante. Hoffentlich kann ich dich mit meinem Bau inspirieren, dein Modell auch anzufangen 🙂
22 July 2023, 09:35
Christian
Schaut sehr gut aus Stefan! Die Sache mit den Nieten für meine E hat der Vorbesitzer meines Kits mit einem kompletten Satz Nieten Decals von HGW gelöst. Für andere Projekte hab ich auch schon über ein solches riveting Tool nachgedacht?! Hab jetzt einmal geplant, das Modell über den Winter zu bauen. Allerdings will ich vorher noch meine UH-1B und die MH-60K zu Ende bringen, bzw. diese parallel dazu bauen. Bis Mitte November bin ich noch sehr mit unserem Hausprojekt und der Landwirtschaft eingeteilt. Auf alle Fälle bin ich auf das Resultat deiner Bemühungen gespannt!!!
Schaut sehr gut aus Stefan! Die Sache mit den Nieten für meine E hat der Vorbesitzer meines Kits mit einem kompletten Satz Nieten Decals von HGW gelöst. Für andere Projekte hab ich auch schon über ein solches riveting Tool nachgedacht?! Hab jetzt einmal geplant, das Modell über den Winter zu bauen. Allerdings will ich vorher noch meine UH-1B und die MH-60K zu Ende bringen, bzw. diese parallel dazu bauen. Bis Mitte November bin ich noch sehr mit unserem Hausprojekt und der Landwirtschaft eingeteilt. Auf alle Fälle bin ich auf das Resultat deiner Bemühungen gespannt!!!
26 August 2023, 06:27
Stefan L.
@Christian Ein solches Nieten Set habe ich auch gesehen aber um ehrlich zu sein, ist es mir nicht wert, den Preis des gesamten Modells noch einmal für Nieten zu zahlen. Gut für dich, dass der Vorbesitzer sie schon gekauft hat, ich würde sie auf jeden Fall benutzen, bin schon gespannt wie deine Emil aussehen wird!
@Christian Ein solches Nieten Set habe ich auch gesehen aber um ehrlich zu sein, ist es mir nicht wert, den Preis des gesamten Modells noch einmal für Nieten zu zahlen. Gut für dich, dass der Vorbesitzer sie schon gekauft hat, ich würde sie auf jeden Fall benutzen, bin schon gespannt wie deine Emil aussehen wird!
7 September 2023, 22:08
Stefan L.
@Mark Lawrence since this is my first BF109, I'm no expert yet but I also like the Emil just simply due to the fact, that the Gustav variants seem to get build more often, which why I like seeing the Emil instead of yet another Gustav!
@Mark Lawrence since this is my first BF109, I'm no expert yet but I also like the Emil just simply due to the fact, that the Gustav variants seem to get build more often, which why I like seeing the Emil instead of yet another Gustav!
7 September 2023, 22:32
John
Looks great Stefan and nice cockpit. Neat trick on the fishing line, thanks.
Looks great Stefan and nice cockpit. Neat trick on the fishing line, thanks.
17 September 2023, 05:58
Stefan L.
@John thank you for your nice words! Always happy to spread some tips! 🙂
@John thank you for your nice words! Always happy to spread some tips! 🙂
18 September 2023, 06:53
Marcin Dudek
Wow, thanks for the detailed description! I learned a lot only by reding. I'm looking forward for more.
Wow, thanks for the detailed description! I learned a lot only by reding. I'm looking forward for more.
18 September 2023, 06:58
Stefan L.
@Marcin Dudek I really appreciate your comment Marcin! I wasn't expecting that someone really reads all the stuff I write but seems I was wrong! It makes me really happy that you found some useful tips even though this is just my second proper model and I am far from being a somehow experienced modeler. Take care and keep modeling 🙂
@Marcin Dudek I really appreciate your comment Marcin! I wasn't expecting that someone really reads all the stuff I write but seems I was wrong! It makes me really happy that you found some useful tips even though this is just my second proper model and I am far from being a somehow experienced modeler. Take care and keep modeling 🙂
19 September 2023, 21:25
John
For the boundaries since it's straight edge you can just touch it up with a post it note pretty easily.
For the boundaries since it's straight edge you can just touch it up with a post it note pretty easily.
19 September 2023, 22:35
Stefan L.
@John thanks for the tip! I would have masked it again but the post it method is much easier, didn't think of that, thanks alot!
@John thanks for the tip! I would have masked it again but the post it method is much easier, didn't think of that, thanks alot!
20 September 2023, 08:33
Jennifer Franklin
That's a neat trick with the fishing line; lots of great detail on your work. Very nice work so far.
That's a neat trick with the fishing line; lots of great detail on your work. Very nice work so far.
26 January, 07:26
Stefan L.
@Jennifer Franklin thank you for the nice words 🙂 I'm really trying my best and hope that my increased experience will show at the end result, especially when compared to my first ever modelkit, the Eurofighter
@Jennifer Franklin thank you for the nice words 🙂 I'm really trying my best and hope that my increased experience will show at the end result, especially when compared to my first ever modelkit, the Eurofighter
27 January, 10:24
TH SCALE MODELS (Thomas Haberl)
Looking good, especially knowing this is your second build. 1:48 is a good scale to start with. Thumbs up and keep modeling 👍
Looking good, especially knowing this is your second build. 1:48 is a good scale to start with. Thumbs up and keep modeling 👍
29 January, 11:55
John
Nice job on the exhaust/gun stains. 👍 You are right, you really can't go too thin on that mix. I'm cheap so I just use XF-1 (and other colors for allied planes that used leaded gas) thinned way down with isopropanol and make multiple passes until it looks right. I also add some pastel/pigment to give some body to the stain as well like you suggested. Looking good, Stefan!
Nice job on the exhaust/gun stains. 👍 You are right, you really can't go too thin on that mix. I'm cheap so I just use XF-1 (and other colors for allied planes that used leaded gas) thinned way down with isopropanol and make multiple passes until it looks right. I also add some pastel/pigment to give some body to the stain as well like you suggested. Looking good, Stefan!
22 July, 16:40
Stefan L.
@John thank you!! Tonight I also used black pigment in the core and close to the gun barrels to give the stains a more interesting look, happy with the result, pictures will follow soon! 🙂 And thanks for the tips, appreciate them alot! 🙂
@John thank you!! Tonight I also used black pigment in the core and close to the gun barrels to give the stains a more interesting look, happy with the result, pictures will follow soon! 🙂 And thanks for the tips, appreciate them alot! 🙂
22 July, 20:47
Zac Tyson
vuole questo oggetto
vuole questo oggetto
SAAB 340 (British Airways/Air Ostrava)
Kovozávody Prostějov (KP) 1:200
KPM2002 2024* Nuove decalcomanie 28 July, 15:11
Zac Tyson
vuole questo oggetto
vuole questo oggetto
SAAB 2000 (Crossair/Japan Air Inspection)
Kovozávody Prostějov (KP) 1:200
KPM2006 2024* Nuove decalcomanie 28 July, 15:11
Irakli Kokrashvili
aggiunto un nuovo album fotografico.
aggiunto un nuovo album fotografico.
34 22 July, 09:39
CaptGPF
LOL! totally agree with Cristian! Love the little touches, especially the blade impaled in the tree!
LOL! totally agree with Cristian! Love the little touches, especially the blade impaled in the tree!
28 July, 15:09
/it/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=it
35
35
/it/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo