Novità

Ian Doody
Made a start on the 1/32 Trumpeter F4F-4 Wildcat, I'm having my wings permanently folded, this is just all dry fitted so far, I'll add more detail later when the wing is added. No point cleaning up the inside part of the wing of ejection holes, as this will be hidden behind the wing. Think it looks ok so far.

Ian Doody
So today I've semi painted up the other sides wing root fold system. And started dry fitting the engine. Need to pick a scheme from the Techmod decals at some point, thinking of 1 or 4 so far.

Ian Doody
Ooh landing gear and engine support structure. Just needs a few touchups, thats it done for now, have to glue it all up straight away, doing it later would be a pain in the ass. Looks ok, I'm no expert on these things. Just for fun build in-between other stuff.

Ian Doody
I think, as an engine that'll do really, don't need anymore detail on it. Couldn't see it if it was there anyway. I'll paint the rear bank of cylinders, but that's probably it.

Ian Doody
That's all for today, making the most of what you get in the kit, only added bits of wire, no sense going mad with detailing parts you wont see. Prop tomorrow, finish the rear bank of Cylinders, and make a start on the cockpit. Looking nice so far, looks like an engine to me.

Ian Doody
Engine, exhaust manifold system and front bulkhead done. For what you can see, the kit parts are good enough. No point spending lots of money on a resin engine. Just some wire and a bit of paint.

Rui S
Looking special 👍 I'm in 😎

Guy Rump
Looking good and detailed build notes, following. 👍

Ian Doody
That's it for today, don't think I can handle seatbelts as well. So far so good, looks like a cockpit, when it's in the plane, you won't see anything. I tarted up the kit seat, as I couldn't stomach making the PE eduard one.

Rui S
hum, hum 😎 looking good 👍

Ian Doody
So I can do seat belts, but I hate doing seatbelts, not brilliant, but for all you'll see, it'll do me. My fear of PE is lessening, I'm getting a bit more confident each time, next the top straps. Then I can tackle the joining of the fuselage halves together, which is tricky on the 1/32 Trumpeter F4F-4 Wildcat, as a few parts need extra sanding to fit. Looks ok to me so far.

Ian Doody
Seatbelts done, that'll do. With my eyesight it'll look amazing from far away lol 😆 but for me, as a learning exercise, looks fine. I would wholeheartedly recommend HGW Laser seatbelts, they make it a lot easier.

Ian Doody
Tomorrow I'll make a start on the Empennage and getting everything to fit. I'm not using any of the PE hinges either. Then wings.

J35J
Great work and progress so far!👍🏻

Ian Doody
Back to the 1/32 Wildcat. Start of paint.

Ian Doody
Hmm, this is going to be interesting. As usual no idea what I'm doing, just riding by the seat of my pants. I'll try and block in all the colours then look into weathering. Who knows how this'll look.

Desert Marlin
The REEDOAK 3D Printed Pilots are awesome!

Desert Marlin
This project will have both pilots on the intercom and watching the engine startup process. That is why the same type figure is used in both cockpits. They both monitor the engine to ensure that the EGT and RPM is increasing appropriately. Each has their hand on the control stick to be able to open their MIC as they confirm everything is normal at start. The plan is to have the aircraft loaded with a Nuke (Apache Cruise Missile?). Seems appropriate to me for the days we live in now...

Desert Marlin
Have to pause this one until I get the BIG ED kit #33216...

Treehugger
Maybe go for resin seats as well?
Seems like kit plastic never can compete with resin seats. 🙂

Though, I no longer crave for resin interior for the cockpit because of the work, but seats are ok.

Desert Marlin
I'll paint these up and see if I can tolerate them. If they are too bland, I have time to change my mind! Thanks for the idea!

Desert Marlin
Great video of the weapon that goes with this version of the Mirage 2000N

Youtube Video

Desert Marlin
Time to return to the 2000N... Let's Nuke something!

Desert Marlin
I got the ResKit Mirage 2000N Cockpit Set (Detailed Version).

Desert Marlin
As I have begun work on this kit, I am yet again struck by the lack of information in the variations and options provided in the kit. For example, the tail tip is not called out that applies to the 2000N version. While the nose of the 2000D is provided in the kit, it has to be modified to make it correct for the 2000N. Oh bother…

Desert Marlin
Selected "most appropriate" tail tip and mounted the correct nose to fuselage.

Desert Marlin
Okay, now I'm excited to get some paint on this cockpit!!! ResKit, you guys have done some great work with your 3D Resin Printing!

Desert Marlin
I'm back to it!

Treehugger
Oh, did you fiddle with the nose part to make it match the N version, or did you have to buy aftermarket nose for the N version? I have this kit in my stash, but haven't really looked any it yet.

Desert Marlin
I'm using the D nose but converting it to an N version. I'm also closing the "sucker doors" on the inlets to represent an engine that is not yet started... I'm assuming initial hydraulic power is applied from the APU and auxiliary hydraulic pumps have brought the gear door up. I'm going to close the speed breaks for pre-engine start configuration...

Eric Thornton
Looks like BAM has some corrected noses still need the N one. Maybe reach out to him. I could use the corrected nose for this kit also. The Reskit stuff looks amazing.

bam-models.com/produ..2000-corrected-nose/

Maciej Bellos
Looks very good!

Marius
Very good looking so far!

Christos Gravanis
Phantastic!

Rui S
Excellent work 👍

Jos Jansen
Phabulous...👍!

Stephen Fitzer
Gorgeous project, very detailed. You must be quite proud.

CaptGPF
Phenomenal build! ❤️❤️❤️

Eric Thornton
Awesome 👍

TV_scalemodels
Thanks! I forgot that I haven't put the video link here. But here it is :
Youtube Video