Novità
Smrchtik
aggiunto un nuovo album fotografico.
aggiunto un nuovo album fotografico.
6 8 July, 20:15
Mr D
Well-done 👌, Nice job , Eduard make a great kit, Did you have any issues with the kit or was it smooth running one the quality side??
Like it 😁👍
Well-done 👌, Nice job , Eduard make a great kit, Did you have any issues with the kit or was it smooth running one the quality side??
Like it 😁👍
8 July, 20:38
Smrchtik
the kit is superb! the only issue I had was, that the fixed front clear part was a little wider than the fuselage. The same for the part infront of it. Next time, I will make a little gap by gluing the fuselage together or will not push the halves too much. The 0,5 mm gap between the fuselage in areapart will fix the issue.
the kit is superb! the only issue I had was, that the fixed front clear part was a little wider than the fuselage. The same for the part infront of it. Next time, I will make a little gap by gluing the fuselage together or will not push the halves too much. The 0,5 mm gap between the fuselage in areapart will fix the issue.
8 July, 22:15
Tom Harris
aggiunto un nuovo album fotografico.
aggiunto un nuovo album fotografico.
42 immagini
Metal Skin Panic MADOX by Goodsmile1:17
MADOX-01 poster that came with my Animeigo Blu-Ray (art by Mercy Rabbit). Signature & ST-00 (Ellie's "Hammerhead" suit) ...
Progetto: Metal Skin Panic MADOX-01
5 16 January, 15:02
Jennifer Franklin
I can't believe that even primed your paint is chipping, that must be incredibly frustrating. It's looking really good though. Very nice detail work on the face.
I can't believe that even primed your paint is chipping, that must be incredibly frustrating. It's looking really good though. Very nice detail work on the face.
26 January, 01:42
CaptGPF
This is going to be an interesting build on an Anime classic. Watching to see how this turns out. 😀.
This is going to be an interesting build on an Anime classic. Watching to see how this turns out. 😀.
12 March, 17:15
Joachim
aggiunto un nuovo album fotografico.
aggiunto un nuovo album fotografico.
20 3 February, 14:14
Alex K
So good to see one of those old kits of early birds being built... And nice result too...! Congrats! 👍 👍
So good to see one of those old kits of early birds being built... And nice result too...! Congrats! 👍 👍
3 February, 14:46
Thomas Wirsching
Joachim "The Spider" - Großartige Arbeit mit den Spanndrähten! Mit den Fingerfertigkeiten könntest Du auch noch Gehirnchirurg werden 🙂👍
Joachim "The Spider" - Großartige Arbeit mit den Spanndrähten! Mit den Fingerfertigkeiten könntest Du auch noch Gehirnchirurg werden 🙂👍
3 February, 16:09
Ben M
How did you shade the ribs like that? Beautiful build of an old kit. The wheels are a remarkable illusion. Did you 3d print them?
How did you shade the ribs like that? Beautiful build of an old kit. The wheels are a remarkable illusion. Did you 3d print them?
8 July, 23:11
Usman Ansari
vuole questo oggetto
vuole questo oggetto
Vickers Valiant B.2 conversion set For use with Micro-Mir Vickers Valiant Mk.1 kit
Aircraft In Miniature Ltd 1:144
TWC144017 2024 Nuovo stampo 10 July, 02:15
Temple Dragon
aggiunto un nuovo album fotografico.
aggiunto un nuovo album fotografico.
5 9 July, 07:29
Roland Sachsenhofer
aggiunto un nuovo album fotografico.
aggiunto un nuovo album fotografico.
12 7 July, 08:59
Roland Sachsenhofer
With these pictures I open the book report on Roden's Junkers D.1: I tried to extend the interior with some steel wire, the seat belts are from Eduard. For the detailing I downloaded the very interesting building instructions from Wingnut Wings for the large D.1 in 1:32, which is quite helpful if you want to have a good documentation as a basis for detailing. I'm also going to realise one of the WW variants, which I immediately liked: all in Dural/ NMF with only a minimal set of markings.
With these pictures I open the book report on Roden's Junkers D.1: I tried to extend the interior with some steel wire, the seat belts are from Eduard. For the detailing I downloaded the very interesting building instructions from Wingnut Wings for the large D.1 in 1:32, which is quite helpful if you want to have a good documentation as a basis for detailing. I'm also going to realise one of the WW variants, which I immediately liked: all in Dural/ NMF with only a minimal set of markings.
7 July, 09:03
bughunter
Watching!
I have done the short fuselage already, I hope one day I can do the long one too.
Is the engine painting finished? I can recommend the WNW manual for this, still available on WNW page.
Watching!
I have done the short fuselage already, I hope one day I can do the long one too.
Is the engine painting finished? I can recommend the WNW manual for this, still available on WNW page.
8 July, 20:44
Roland Sachsenhofer
Thanks for the tip - it's definitely a good one! The printed WNW instructions are next to me, so I want to use a little oily black on the top of the engine and add a little "brass"... But not only WNW instructions, also your excellent work is my reference.
Thanks for the tip - it's definitely a good one! The printed WNW instructions are next to me, so I want to use a little oily black on the top of the engine and add a little "brass"... But not only WNW instructions, also your excellent work is my reference.
9 July, 12:35
Alex
aggiunto un nuovo album fotografico.
aggiunto un nuovo album fotografico.
11 27 June, 09:04
Villiers de Vos
Very nice texturing and weld marks on this Soviet beast. The photo etch details is a nice touch.
Very nice texturing and weld marks on this Soviet beast. The photo etch details is a nice touch.
10 July, 02:10
Martin
aggiunto un nuovo album fotografico.
aggiunto un nuovo album fotografico.
49 immagini
Have a break - have a Gulasch!Nuovo: 9 July, 18:14 1:35
Progetto: Have a break - have a Gulasch!
3 9 July, 18:11
Dave Burgess
aggiunto un nuovo album fotografico.
aggiunto un nuovo album fotografico.
5 15 July 2018, 18:32
Dave Burgess
Surface detail was fine; cockpit left a bit to be desired. The wings had a tendency to warp down at the tips, I think due to the way the kit was designed. The lower wing half does not go right to the end. The tip of the lower wing is molded to the upper half, and the lower half fits into one of the panel lines. When the glue starts to set, it pulls the tip of the upper wings I had to aggresively heat and bend the wing tips up to remove the warp, and was not entirely successful. Some of the decals were a bit fragile.
Surface detail was fine; cockpit left a bit to be desired. The wings had a tendency to warp down at the tips, I think due to the way the kit was designed. The lower wing half does not go right to the end. The tip of the lower wing is molded to the upper half, and the lower half fits into one of the panel lines. When the glue starts to set, it pulls the tip of the upper wings I had to aggresively heat and bend the wing tips up to remove the warp, and was not entirely successful. Some of the decals were a bit fragile.
15 July 2018, 19:09
Gordon Sørensen
Nice looking Clunk, Dave. My father flew the CF-100 a couple of times with the Test and Acceptance flight, said when the gear comes up, whole airframe shook!
Nice looking Clunk, Dave. My father flew the CF-100 a couple of times with the Test and Acceptance flight, said when the gear comes up, whole airframe shook!
16 July 2018, 18:41
Dave Burgess
I believe that's where the nickname for the CF-100 came from: the sound of the gear retracting.
I believe that's where the nickname for the CF-100 came from: the sound of the gear retracting.
16 July 2018, 19:34
QQWAGG
vuole questo oggetto
vuole questo oggetto
R-11 USAF/NATO Fuel Truck With Missile Loading Cart
Kinetic 1:48
K48116 2024 Nuova scatola Argomento multiplo (1!!)10 July, 02:07
Joe Kim
aggiunto un nuovo album fotografico.
aggiunto un nuovo album fotografico.
48 immagini
Northrop Delta 1C buildNuovo: 10 July, 02:07 1:72
Completed model.
Progetto: Northrop Delta 1C
18 26 June, 21:50
Michael Kohl
Ahhh, those Azur kits are not for the faint of heart, but encompass some lovely subjects. Cross my fingers for a good result on this one. Following with interest.
Ahhh, those Azur kits are not for the faint of heart, but encompass some lovely subjects. Cross my fingers for a good result on this one. Following with interest.
29 June, 12:40
/it/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=it
35
35
/it/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo