Novità

Dave Burgess
This an absolutely TERRIBLE kit! It looks like a Chinese (Mister Craft?) knock-off of the Tamiya kit, complete with diagrams that look like they've been copied from the Tamiya instructions. Unfortunately, they didn't copy the parts! The kit quality was horrible, very little detail, and what detail was there looked like it was scribed in with a chisel. Landing gear struts molded into the L.G. doors, a laughable ejection seat that looks NOTHING like the depiction in the instructions, and really crappy soft plastic with a really rough surface. Still, I got it for the livery (Starblazers) and decided to do it anyway. That is, until I started decaling and found the decals SO fragile, that they shattered as soon as I laid them down and tried to position them. The four wing panel decals each had several cracks running through them even before I started to cut them off the sheet. I'm going to try to find a better Starblazers decal sheet, but quite frankly, it's not worth wasting it on this kit. Mister Craft's F-84G has been consigned to the waste basket. I won't be purchasing any more kits from this Chinese P.o.S. manufacturer! I'll get another Tamiya kit instead!

Erik De Smet
Yes, indeed a terrible kit. The kit seems to be a copy of the very old FROG kit, and the molds are still used and re-issued by several POLISH brands , including Mistercraft, Big Model etc. with equally poor decals. The Tamiya kit is by far the best, but is sold out almost everywhere. The Academy/Italeri is also good but hard to find, The heller kit is obsolete too. Have a look at my album : Thunderjet comparative build : Thunderjet comparative build | Album by opadesmet (1:72)

Colin
I feel your pain. Out of the two Mister Craft kits that I have tried (a Harrier and a SU-20), both had horrible mismatch between the instructions and the parts that were actually included. The Harrier kit even had the wrong amount of pieces advertised on the box (over 30 pieces less than advertised). You really get what you pay for with this brand.

Erik De Smet
mister craft kits are a very mixed bag. Some of them , like the thunderjet, are poor copies of very old (50 years +) kits. Some are reissues of older KP kits , but their fouga magister is apparently a reboxing of the Heller kit with their decals. btw their decals are mostly of poor quality, inaccurate & incomplete. But if you have spare decals e.g. from a Special Hobby kit, some of their kits like the fouga, maybe a cheap alternative. Here at scalemates , you can always check the product timeline to find the ancestors of a kit, and a vendor like super hobby shows the content of the kit on their website so that you can know what to expect before buying.

Dave Burgess
Erik, I know. I use the Scalemates database frequently.

Finn
Following

Jennifer Franklin
me too

Dietmar Bogatzki
taking a seat

Landlubber Mike
Thanks guys! Hope I make it worth your while!

Nicolas
Following

Neil
Me too 👍

Landlubber Mike
Welcome aboard Nicolas and Neil! Thanks for your interest.

Lochsa River
have to sit in...this is in the stash...I was looking at it yesterday...

Lochsa River
A tip...others who built this kit had trouble around the cockpit....

Guy Rump
Following! 👍

Carlo
Nice, a flying boat. Hope this(or Sword) kit gets re-issued one day soon..

Alec K
Taking a seat.

Landlubber Mike
Thanks for following guys. Lochsa, you're right about the canopy. There are fit issues in general with this kit - most of which aren't too difficult to deal with - but the canopy is a bit of a mess. I'm not really looking forward to that part of the build.

Robert Podkoński
Taking a seat here too!

Landlubber Mike
Thanks for joining Robert!

Michael Kohl
Didn't know the subject, like the projekt, love to follow.

Landlubber Mike
Thanks Michael - glad to have you along!

Ben M
💺

Zbynek Honzik
Taking a seat!

Landlubber Mike
Thanks Ben and Zbynek, welcome aboard! Thanks for looking in!

Alec K
Nice detailing and progress 👍

Transall NG
A nice and strong landing gear !

Landlubber Mike
Thanks guys! Transall, it seems a lot stronger than the kit parts which were made from pretty thin plastic.

Pietro De Angelis
Beautiful work, congrats!

Landlubber Mike
Thank you Pietro! Still a long way to go. In the middle of priming the fuselage and having gap and other problems popping up. This is the build that never seems to end 🙁

gorby
Amazing work on the landing gear.

Landlubber Mike
Thanks Gorby! This was my first time trying to scratch build landing gear. Took me probably 20 hours 🙁 I ended up using Albion Alloys brass tubing for a lot of it, along with music wire, copper wire, plastic tubing, and other materials. I've bumped it a few times already and it is very stable so fingers crossed it makes it to the finish line!

Mr D
Nice 😀👍 a water-bird , nice work and like the extras

Landlubber Mike
Thanks Mr D! Really appreciate it!

Jennifer Franklin
I love all the scratch building, especially the landing gear; it is very nice! It's a great result.

Landlubber Mike
Thank you very much Jennifer!

Michael Kohl
Time to replace the teaser picture with one of your build. 🙂

Landlubber Mike
That might jinx me!

Michael Kohl
Oh yeah. You gotta be super-careful with that. This site is full of black magic. Pssst. Between us: I know for sure because it's the only explanation how some guys here achieve their otherworldly results.
Happy modelling - but watch your back 😉

Landlubber Mike
Yeah, I know what you mean. Some people here are ridiculously talented!

I ended up finishing the JRS-1 tonight. Finally pictures in my album. And Michael, I did replace the teaser picture with my final build - now that it's done and stored in my glass case, much less risk of jinxing myself!

gorby
WOW Stunning result Mike!
Looks like you might be one of those ridiculously talented people. 😉

Guy Rump
Excellent modelling. 👍

Neuling
I agree with gorby and Guy. 👍👍

Curatorm
A masterpiece and a delight for the eyes, bravo!

Alec K
Very well done 👍

Michael Kohl
Excellent result.

Landlubber Mike
Thank you guys! This one was a tricky one for sure, but I'm happy with how it came out. Definitely a cool paint scheme, very colorful bird!

Guy Rump
I forgot to put this in the ideas so it is starting "in progress".

Made a start with the cockpit and some weight in the nose, hopefully it's enough. 🙂

Nicolas
Following

Villiers de Vos
This will not be a tail sitter! Also booking my seat.

Guy Rump
Fuselage together, undercarriage fitted and aircrew added. 🙂

Welcome Nicolas & Villiers, thanks for your interest. 👍

Many thanks mates for your interest and likes NordMito, Matti T, Villiers DV & J35J. 👍

Robert Podkoński
Taking a seat.

Bernd Grün
Promising start, Guy. 👌 Looking for the final result.

Guy Rump
Wings and tail plane added. 🙂

Thanks for stopping by Robert & Bernd, as always, you're both very welcome. 👍

Many thanks mates for your interest and likes Robert P, scaleffect & Bernd G. 👍

Guy Rump
The Gnat had the canopy added, masked and then primer applied (light grey). I have painted the yellow with 3 coats of Vallejo Model Air Medium yellow and 2 coats of Hataka BS Golden Yellow. Next will be the tail. 🙂

Many thanks mate for your interest and like Sukhoi242. 👍

Guy Rump
Tail now painted black with yellow. 🙂

S M
Nice Yellowjack!👍

Mr D
Good to see the yellow on it, dose look good in the yellow.
Takes your time on the landing gear, can be little fiddly.
Good stuff 👌, thanks for uploading

Guy Rump
Sprayed with gloss varnish and then added the decals. Next will be adding the wheels and other ancillaries. 🙂

Many thanks for your kind comments SM and Mr D, they are greatly appreciated. @ Mr D, The front landing gear was very difficult to get off the sprue so I know what you mean. 👍

Many thanks mates for your interest and likes SM & Mr D. 👍

Guy Rump
Now completed, this is a Folland Gnat from the Yellowjacks display team based at RAF Valley, Anglesey in 1964, a forerunner team of the Red Arrows. 🙂 The last photo is a picture of the actual aircraft.

Many thanks mates for your interest and likes Duster_d, JK, Franck D, Joseph L & Alex R. 👍

Robert Podkoński
Taking a seat here 🙂

Antoine Meylan
Bienvenue Robert

Jennifer Franklin
Following 👀

Antoine Meylan
Bienvenue Jennifer!

Jennifer Franklin
Merci Antoine

Pierre Pierre
Je prends un siege aussi

Antoine Meylan
Bienvenue à toi aussi pierre!

Guy Rump
Looking good, following. 👍

S M
One of the prettiest planes 😄 Following!

Antoine Meylan
Bienvenue Guy et S M.