Novità
Christophe Ameline
possiede questo oggetto
possiede questo oggetto
Afrika Korps WWII
Verlinden Productions 120mm
685 19 July, 16:19
markjorgensen
possiede questo oggetto
possiede questo oggetto
Grumman F9F Panther Part One: Development, Testing, Structures
Naval Fighters N. 59
Corwin Meyer
2002 19 July, 16:13
Ricardo Reis
aggiunto un nuovo album fotografico.
aggiunto un nuovo album fotografico.
33 immagini
E-2C Hawkeye (WIP)Nuovo: 18 July, 23:06 1:48
Some brute force needed here
Progetto: Grumman E-2C Hawkeye
49 23 October 2023, 19:02
Sebastijan Videc
aggiunto un nuovo album fotografico.
aggiunto un nuovo album fotografico.
30 3 July, 10:19
Sebastijan Videc
Thank you guys, if all the planets align, she'll be in her colours by the end of the week, just before I head out for holidays.
Thank you guys, if all the planets align, she'll be in her colours by the end of the week, just before I head out for holidays.
15 July, 11:00
Maciej Bellos
I got Gabreski's mount so I got to watch this one. Excellent work Sebastijan! Just a question, how come the cockpit interior is painted in AOTAKI green (japanese interior colour)?
I got Gabreski's mount so I got to watch this one. Excellent work Sebastijan! Just a question, how come the cockpit interior is painted in AOTAKI green (japanese interior colour)?
19 July, 09:59
Frank Brzobohaty
Nice modeling stand where did you get it from? and great job on the P-47!!
Nice modeling stand where did you get it from? and great job on the P-47!!
19 July, 15:48
Philippe Cano
possiede questo oggetto
possiede questo oggetto
Sa'ar - Israeli Storm in the Sky
Dassault Super Mystère B2 Hi-Tech Kit + Book + 3D Printed Add-Ons Special Hobby 1:48
SH48238 B 2024 Nuove parti 19 July, 16:08
Martin Oostrom
aggiunto un nuovo album fotografico.
aggiunto un nuovo album fotografico.
29 immagini
WIP Köln trailerNuovo: 19 July, 13:48 1:24
Glorious red!
Progetto: DAF 95 XF & Trailer "Köln Truck"
17 16 May, 18:27
Bozzer
I'm glad to see, that it's not just me, who does all this type of prep work. I've spent far too much time and money, on tools, gizmo's and fabrication of various things, just to try and speed up this process. Yet, I still end up falling back to the back of a #11 knife blade!
I'll hang around for this one mate, mainly to see the outcome of those amazing decals. But also to watch how the trailer goes together?
I helped my son build the Spacecab, way back in the early 2000's. He didn't enjoy it and abandoned his efforts 🙁 No wonder he became a plumber 😛
I'm glad to see, that it's not just me, who does all this type of prep work. I've spent far too much time and money, on tools, gizmo's and fabrication of various things, just to try and speed up this process. Yet, I still end up falling back to the back of a #11 knife blade!
I'll hang around for this one mate, mainly to see the outcome of those amazing decals. But also to watch how the trailer goes together?
I helped my son build the Spacecab, way back in the early 2000's. He didn't enjoy it and abandoned his efforts 🙁 No wonder he became a plumber 😛
16 May, 23:58
Martin Oostrom
Kerry Cox taught Peter Hardy and Peter taught me: "Better remove those lines, you'll always know they're there."
I mostly use the cutting edge of the blade to scrape, I'll try the back sometime.
I assembled the chassis today and it seems perfectly straight. A lot of work remains before I can start on the decals.
Kerry Cox taught Peter Hardy and Peter taught me: "Better remove those lines, you'll always know they're there."
I mostly use the cutting edge of the blade to scrape, I'll try the back sometime.
I assembled the chassis today and it seems perfectly straight. A lot of work remains before I can start on the decals.
17 May, 20:51
Bozzer
If you draw the edge, of the back of the blade, it gives you a nice smooth, flat surface. It also doesn't dull your sharp blade? After a while, it becomes second nature. I have found, that those nasty mold lines, show up even more, when paint is applied? Even when I glue two parts together, it's always the back of the knife, that deals with the seam. You should definitely try it, and see if you notice the difference.
If you draw the edge, of the back of the blade, it gives you a nice smooth, flat surface. It also doesn't dull your sharp blade? After a while, it becomes second nature. I have found, that those nasty mold lines, show up even more, when paint is applied? Even when I glue two parts together, it's always the back of the knife, that deals with the seam. You should definitely try it, and see if you notice the difference.
17 May, 22:21
Martin Oostrom
The doctor is in 😄
I managed some work on the axles Tuesday evening and I had half a day to myself yesterday. So I built the box with a lot of added plastic to get everything squared. I'll be sanding the outside and I don't want the thing to fold.
The mudflaps were unconvincing , so I went to town on them. Your opinions please?
The doctor is in 😄
I managed some work on the axles Tuesday evening and I had half a day to myself yesterday. So I built the box with a lot of added plastic to get everything squared. I'll be sanding the outside and I don't want the thing to fold.
The mudflaps were unconvincing , so I went to town on them. Your opinions please?
26 May, 07:56
Bozzer
I've heard of guys, filling in reefers, with expanding foam?
I've never personally done it, because I like the option of opening doors. Those mudflaps look so much better now, too.
I've heard of guys, filling in reefers, with expanding foam?
I've never personally done it, because I like the option of opening doors. Those mudflaps look so much better now, too.
26 May, 19:34
Martin Oostrom
Mmm, insulation foam in a reefer….
There is/was a load of cyanide in that stuff. Not something I want to emit in my hobby room.
My 2k also contains cyanide, but those vapours are mainly vented outside
Mmm, insulation foam in a reefer….
There is/was a load of cyanide in that stuff. Not something I want to emit in my hobby room.
My 2k also contains cyanide, but those vapours are mainly vented outside
27 May, 14:05
Bozzer
I have never checked mate, and I've used it for sealing gaps, etc, for decades? However, I've definitely not used it on any models. In fairness though, all my current reefers are from AMT. I love the fact that they use 1 piece plastic, for the sides, base and top. It definitely makes them sturdy. I do have a few Italeri reefers though, and I was thinking about lining them with thin plastic? I don't want to compromise the look, so I thought maybe some 1mm sheet, would work? What do you think mate?
I have never checked mate, and I've used it for sealing gaps, etc, for decades? However, I've definitely not used it on any models. In fairness though, all my current reefers are from AMT. I love the fact that they use 1 piece plastic, for the sides, base and top. It definitely makes them sturdy. I do have a few Italeri reefers though, and I was thinking about lining them with thin plastic? I don't want to compromise the look, so I thought maybe some 1mm sheet, would work? What do you think mate?
27 May, 20:21
Martin Oostrom
Lining with 1mm sheet is a possibility, but … see my new picture. On both sides there are two half rods running the whole length of the trailer and the ceiling is littered with protruding ejection marks.
The floor is smooth as the ejection marks are on the underside.
This Revell edition has water slide decals, the Italeri reefer I have has two big stickers for each side. Will be hell to line up, so I'll probably paint something.
Lining with 1mm sheet is a possibility, but … see my new picture. On both sides there are two half rods running the whole length of the trailer and the ceiling is littered with protruding ejection marks.
The floor is smooth as the ejection marks are on the underside.
This Revell edition has water slide decals, the Italeri reefer I have has two big stickers for each side. Will be hell to line up, so I'll probably paint something.
27 May, 20:54
Bozzer
On large decals, it's best to cut them into 3. It just makes things easier. I honestly wouldn't have a clue what to do with stickers though? That's exactly what I have, on my Smokey and the Bandit 2 trailer.
Which reminds me...
Jerry from Modeltruckin, is retiring. Last orders are being taken upto end of July. Get them decals ordered mate, before you can't get them again!
On large decals, it's best to cut them into 3. It just makes things easier. I honestly wouldn't have a clue what to do with stickers though? That's exactly what I have, on my Smokey and the Bandit 2 trailer.
Which reminds me...
Jerry from Modeltruckin, is retiring. Last orders are being taken upto end of July. Get them decals ordered mate, before you can't get them again!
27 May, 21:26
Bozzer
I just took a closer look at your pictures. I see those rails now. I'm guessing that they were a feature, to stop pallets from ramming up tight to the side, on the 1:1 version? The injection pin marks, I can Dremel away. You've actually got me thinking about digging out one of my reefers now, lol
I just took a closer look at your pictures. I see those rails now. I'm guessing that they were a feature, to stop pallets from ramming up tight to the side, on the 1:1 version? The injection pin marks, I can Dremel away. You've actually got me thinking about digging out one of my reefers now, lol
27 May, 21:34
Martin Oostrom
In the real one, there will be a strip with slits to secure the cargo. But those are generally not that high and low. See picture.
In the real one, there will be a strip with slits to secure the cargo. But those are generally not that high and low. See picture.
28 May, 06:00
Bill Newcomer
Late to the party. (I have been really busy with my wife's garden and my 1:1 car) Following. Making your box square and straight looks like quite the endeavor.
Late to the party. (I have been really busy with my wife's garden and my 1:1 car) Following. Making your box square and straight looks like quite the endeavor.
31 May, 04:12
Martin Oostrom
Dry fitting the door showed a small gap between them. I later added a strip of styrene to the back. Stiffening the doors by accident.
I removed the moulded rear lights, only realising too late that they're hollow. A thin sheet of styrene helped. I also glued a strip to the storage bins. Too much sanding otherwise. Now all trailer parts are ready for painting.
Dry fitting the door showed a small gap between them. I later added a strip of styrene to the back. Stiffening the doors by accident.
I removed the moulded rear lights, only realising too late that they're hollow. A thin sheet of styrene helped. I also glued a strip to the storage bins. Too much sanding otherwise. Now all trailer parts are ready for painting.
16 June, 18:25
Lode Schildermans
Definitely impressed, Martin. Smart building by improving stability in the beginning of the build. I particularly like the improvements with styrene
Definitely impressed, Martin. Smart building by improving stability in the beginning of the build. I particularly like the improvements with styrene
17 June, 06:17
Bozzer
I wonder if that PE is going to be the bars and locking system, for the back doors?
I wonder if that PE is going to be the bars and locking system, for the back doors?
18 June, 02:24
Martin Oostrom
Primer's on! It took over 4 hours to paint the truck and trailer in my tiny booth.
Primer's on! It took over 4 hours to paint the truck and trailer in my tiny booth.
18 July, 16:19
Lode Schildermans
But the result is a success. Looking forward to see your progress of this big one
But the result is a success. Looking forward to see your progress of this big one
19 July, 05:39
Martin Oostrom
First colours are here. Tamiya bright red, Tamiya silver and not shown, Tamiya aluminium straight from the can on the reefer itself.
First colours are here. Tamiya bright red, Tamiya silver and not shown, Tamiya aluminium straight from the can on the reefer itself.
19 July, 13:50
Daniele Riavini
vuole questo oggetto
vuole questo oggetto
Israeli M113. Yom Kippur War to Lebanon 1978
Bison Decals 1:35
35174 19 July, 16:03
wacocg13
Added a new review for:
Added a new review for:
Fist of War
German WWII E75 Ausf. Vierfüßler Rheintochter 1 Modelcollect 1:72
UA72113 2017 Nuove parti 19 July, 15:56
Soeren R.
aggiunto un nuovo album fotografico.
aggiunto un nuovo album fotografico.
6 immagini
WiP: Nakajima Ki-49-I Type 100 DonryuNuovo: 19 July, 15:51 1:72
Progetto: Nakajima Ki-49-I Type 100 Donryu
9 14 July, 08:54
/it/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=it
35
35
/it/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo