Su-25TK Ethiopia
Commenti
68 25 January, 19:29
John
Very cool, looks like you've got a good start to this kit. These old OEZ ones are pretty basic and the panel lines are quite fuzzy. I hope your SWCs hold it on its front gear. 😉
Very cool, looks like you've got a good start to this kit. These old OEZ ones are pretty basic and the panel lines are quite fuzzy. I hope your SWCs hold it on its front gear. 😉
25 January, 22:22
Nathan Dempsey
Thanks Eric, Robert & John 🙂 Welcome to the build.
John: I must have put lead shot behind that Apoxie-Sculpt. It is so heavy I'm afraid the gear might bend under it. We shall see as I've been wrong before 😂
Thanks Eric, Robert & John 🙂 Welcome to the build.
John: I must have put lead shot behind that Apoxie-Sculpt. It is so heavy I'm afraid the gear might bend under it. We shall see as I've been wrong before 😂
26 January, 00:59
Nathan Dempsey
Welcome Jennifer!
This evening the modifications to the tail have been completed. The new bulge contains the flare dispensers along with the tail cap IR jammer. Some other very small antennas were also added to the tail and bulge.
Welcome Jennifer!
This evening the modifications to the tail have been completed. The new bulge contains the flare dispensers along with the tail cap IR jammer. Some other very small antennas were also added to the tail and bulge.
26 January, 03:50
Nathan Dempsey
Tyu: So far my research indicates this one was a Su-25UBK. You can see the vents still on the side for the internal gun which was deleted on the TK when the gun was moved to the outside. What I really love about this image is notice how off-kilter the tail code numbers are. This proves that the constant need for decal alignment perfection is not always what happens in the real world.
Tyu: So far my research indicates this one was a Su-25UBK. You can see the vents still on the side for the internal gun which was deleted on the TK when the gun was moved to the outside. What I really love about this image is notice how off-kilter the tail code numbers are. This proves that the constant need for decal alignment perfection is not always what happens in the real world.
26 January, 17:03
tyu
True, good luck in your build research. Hard subject to find info on. And who cares for aligning fonts 😉.
True, good luck in your build research. Hard subject to find info on. And who cares for aligning fonts 😉.
26 January, 17:09
Nathan Dempsey
😂 This is true.
My research so far is rather sad. Two purchased & one crashed, the other used for a few months, then just languishing outside for nearly a decade not being used at all.
😂 This is true.
My research so far is rather sad. Two purchased & one crashed, the other used for a few months, then just languishing outside for nearly a decade not being used at all.
26 January, 17:14
Nathan Dempsey
A little more progress today. The engine pods required a bunch of sanding and rescribe work. All the cannon venting on the underside was also filled in. Added the new air scoops to the top and bottom of the engine nacelles.
A little more progress today. The engine pods required a bunch of sanding and rescribe work. All the cannon venting on the underside was also filled in. Added the new air scoops to the top and bottom of the engine nacelles.
28 January, 02:04
John
"The engine pods required a bunch of sanding and rescribe work" First OEZ kit? 😉
But seriously, interesting subject. I wonder why they bought a two-seater then just covered over the rear cockpit?
"The engine pods required a bunch of sanding and rescribe work" First OEZ kit? 😉
But seriously, interesting subject. I wonder why they bought a two-seater then just covered over the rear cockpit?
28 January, 02:38
Nathan Dempsey
It's a whole different variant. The TK version was supposed to be a "night tank hunter". The rear cockpit was removed and replaced with a fuel tank and avionics. The safety of the pilot was their top concern 😂. Also the gun was moved to the outside. You can see it just behind the man in the pic.
It's a whole different variant. The TK version was supposed to be a "night tank hunter". The rear cockpit was removed and replaced with a fuel tank and avionics. The safety of the pilot was their top concern 😂. Also the gun was moved to the outside. You can see it just behind the man in the pic.
28 January, 12:59
Nathan Dempsey
A little more work today. Nearly finished all the weapons for both builds. Also had time to add the external mounted gun on the TK.
A little more work today. Nearly finished all the weapons for both builds. Also had time to add the external mounted gun on the TK.
31 January, 16:37
John
Nice job on the stores and cannon, looks pretty easy to break off though! I've always liked the look of the S-25 rocket. It makes me think there were a couple of Russians sitting around after work one day at State Aircraft Weapons Factory No. 6 and brainstorming.
"The RPG works pretty well, what if we just made it BIGGER, comrade?"
"DA!"
Nice job on the stores and cannon, looks pretty easy to break off though! I've always liked the look of the S-25 rocket. It makes me think there were a couple of Russians sitting around after work one day at State Aircraft Weapons Factory No. 6 and brainstorming.
"The RPG works pretty well, what if we just made it BIGGER, comrade?"
"DA!"
31 January, 17:20
Nathan Dempsey
Thanks mates I hope you enjoy the progress. Hopefully today I'll paint ejection seats, then preparation for painting.
Rui: You are correct. The fact that pic 5 shows it in a hangar tells that they "cared" for it much more. 🤣 Since there's no pics of it armed, I will arm it with the propaganda photo weaponry not the cheap stuff.
Thanks mates I hope you enjoy the progress. Hopefully today I'll paint ejection seats, then preparation for painting.
Rui: You are correct. The fact that pic 5 shows it in a hangar tells that they "cared" for it much more. 🤣 Since there's no pics of it armed, I will arm it with the propaganda photo weaponry not the cheap stuff.
3 February, 14:45
Nathan Dempsey
More work today adding antennas and new ECM blisters on the wing pods.
More work today adding antennas and new ECM blisters on the wing pods.
6 February, 15:07
Nathan Dempsey
Thanks James 😊 Today has been productive. The eye marking is complete.
Thanks James 😊 Today has been productive. The eye marking is complete.
15 February, 21:05
Nathan Dempsey
Thank you Jennifer & Dick 🙂
Doing washes and then weathering with oils today. Trying to attain that "not so airworthy" look.
Thank you Jennifer & Dick 🙂
Doing washes and then weathering with oils today. Trying to attain that "not so airworthy" look.
16 February, 21:23
Nathan Dempsey
I wouldn't even think of touching it again for 2 days. After that I'd test a very small area and likely wait another full day. Luckily for me I'm ghost building another Su-25 on the side, otherwise this would be a painful ordeal.
I wouldn't even think of touching it again for 2 days. After that I'd test a very small area and likely wait another full day. Luckily for me I'm ghost building another Su-25 on the side, otherwise this would be a painful ordeal.
17 February, 22:45
Nathan Dempsey
😂 Neil, I'm always juggling several builds.
Jennifer: It only makes a couple of appearances here in this album. I have the Big Ed photo etch set on that build, so it lagged behind this one.
😂 Neil, I'm always juggling several builds.
Jennifer: It only makes a couple of appearances here in this album. I have the Big Ed photo etch set on that build, so it lagged behind this one.
18 February, 00:36
Jennifer Franklin
I wouldn't want to be on the wrong side of this one. Very nice model. It's perfect.
I wouldn't want to be on the wrong side of this one. Very nice model. It's perfect.
20 February, 11:46
Neil
Great work Nathan and yeah I'm with you... Never hurts to build lots at once!! Hahaha 🤣 result here looks lovely 👍
Great work Nathan and yeah I'm with you... Never hurts to build lots at once!! Hahaha 🤣 result here looks lovely 👍
20 February, 12:59
Nathan Dempsey
Thank you so much for your kind words mates. I'm ready to continue on with the other Su-25 today.
Thank you so much for your kind words mates. I'm ready to continue on with the other Su-25 today.
20 February, 13:51
Neuling
Very good colors and paintwork. More photos of the completed model would be nice.
Very good colors and paintwork. More photos of the completed model would be nice.
21 February, 09:37
Nathan Dempsey
Thanks Gary & Neuling. This one was great fun.
Hopefully getting a space prepared for better photos soon. This is by far my weakest skill though so I tend to just buy more kit related items than things that would improve my photography. 😂
Thanks Gary & Neuling. This one was great fun.
Hopefully getting a space prepared for better photos soon. This is by far my weakest skill though so I tend to just buy more kit related items than things that would improve my photography. 😂
21 February, 16:04
Dutch
Another beautiful result, Nathan! Way to knock these out of the park! K/r, Dutch
Another beautiful result, Nathan! Way to knock these out of the park! K/r, Dutch
30 April, 18:25
Nathan Dempsey
Thank you NLAWS! I guess the only good thing about the story is that it let me have more freedom with the load out.
Thank you NLAWS! I guess the only good thing about the story is that it let me have more freedom with the load out.
14 May, 18:39