Takom Krupp Raumer S
The two body sections, which probably are sprue B, but are not actually attached to any sprue.
Sprue A (2 off)
Sprue C (2 off)
Sprue D (2 off)
Decals. Four options, at least two of which are fictional.
Plenty of filler required around the underside.
Ejector pin marks also need filling.
A bit more progress. I've not stuck the top inserts in yet as I think it would be best to get some paint on them first! Takom might have done the hatches as separate parts. The side doors are done that way.
They just drop in and have chamfered front corners so they only fit one way.
Fill, sand, repeat. You know the drill.
Test fitting the wheels. There's not that many parts left on the sprues now.
A quick mock-up of the two ends.
I'll have to hide the join around the rim of the wheels as it's quite visible even with the tread plates installed.
Commenti
9 2 July, 18:40
John Hughes
Well, okay, Gorby, but follow at your own risk. It is a mine clearing vehicle, after all.
Well, okay, Gorby, but follow at your own risk. It is a mine clearing vehicle, after all.
3 July, 17:27
gorby
😄 😄 😄
Should be safe enough. At 150 tons you're going to know which bit it's cleared. 😄
😄 😄 😄
Should be safe enough. At 150 tons you're going to know which bit it's cleared. 😄
3 July, 18:00
NLAWScametovisit
Oh wow. Ive never heard of this thing before! When I saw the first picture I thought at first must be an alternate history tank. Following with interest!
Oh wow. Ive never heard of this thing before! When I saw the first picture I thought at first must be an alternate history tank. Following with interest!
6 July, 14:33