F-100D Super Sabre

1
April 2, 2013
This is going to need a lot of work.
2
April 3, 2013
Now the intake is done it's starting to look more like a Hun.
3
April 3, 2013
When I started the exhaust nozzle was square and the hole was oval.
4
April 3, 2013
Wings cleaned up and the raised detail removed. I've scribed the major control surfaces.
5
April 5, 2013
I've scribed the fuselage, reprofiled the nose with card and started correcting the wing chord and tail fin.
6
April 5, 2013
Now that the wing chord has been corrected it's dimensions are very accurate.
7
April 11, 2013
Airbrake done, I've also made the tail skid.
8
April 13, 2013
Nose wheel assembly finished, I used o-rings for tyres.
9
May 8, 2013
All the detail parts finished.
10
May 8, 2013
I bought a pre-painted F-Toys model for the drop tanks, pilot tube and refueling probe.
11
May 8, 2013
Primed for painting, the whole cockpit area had to be reshaped and the canopy cut down and filled.
12
May 8, 2013
Added the inner exhaust and fitted an intake trunk to the nose.
13
May 8, 2013
I noticed the F-Toys model's wing chord was a little short for a "D", it's the length of an early F-100 so I've converted it to an "A".
14
May 8, 2013
I repainted and detailed the cockpit of the F-100A.
15
May 8, 2013
As the F-100A's wing chord was already correct, all I had to do was reshape the wings and remove the flap panel lines.
16
May 8, 2013
Side by side you can see how much shorter the early F-100A tail was.
17
May 10, 2013
(F-100A) After priming I painted random panels in white, light grey, light blue, sand or black, the effect it has had on the silver is evident in this photo. I really pleased how it came out.
18
May 10, 2013
(F-100A) After priming I painted random panels in white, light grey, light blue, sand or black, the effect it has had on the silver is evident in this photo. I really pleased how it came out.
19
May 10, 2013
(F-100D) Engine and exhaust area sprayed silver ready for masking.
20
May 15, 2013
Dry brushed the heat discolouration on the engine bay of the F-100A.
21
May 15, 2013
Dry brushed the heat discolouration on the engine bay of the F-100A
22
May 24, 2013
Decals applied but still a lot of work to do.
23
May 24, 2013
24
May 25, 2013
25
May 25, 2013
26
May 27, 2013
27
May 27, 2013
28
May 27, 2013
29
May 27, 2013
30
May 27, 2013
31
May 27, 2013
32
August 18, 2013
This has been on hold while, I've been trying to figure out how to do the Danish markings. I've ended cutting them out of spare sheets as I found sets of roundles online but without the fin markings.
33
August 18, 2013
Cheap tool with six sizes of cutter. I used a mini-drill to sharpen them and now they are razor sharp, perfect discs every time!
34
August 21, 2013
I'm happy with the decals 🙂 I've done quite a lot of weathering with oils and pastels.
35
August 21, 2013
36
August 21, 2013
37
August 21, 2013
38
August 22, 2013
Big push today and I've finished!
39
August 22, 2013
40
August 22, 2013
41
August 22, 2013
The "A-502" is fictitious but it's all I had in the spare decal stack.
42
August 22, 2013
43
August 22, 2013
44
August 22, 2013
All the detail parts I made came together quite well.
45
August 22, 2013

Commenti

2 April 2013, 19:00

Dave Flitton
What? You're not going to drill out the cockpit and super detail it?

2 April 2013, 20:06

Speedman
It'll be hard enough producing a finished kit that's not 50% filler! 🙂

2 April 2013, 20:14

Dave Flitton
you are brave! I will be watching, I may want to dig out a few 1:144 aircraft just to feel your pain! 🙂

2 April 2013, 20:16

Gordon Sørensen
Are you going to finish it in the gloss green or NMF? I am planning on doing an Esci 1/72 F-100, and am going to attempt to foil it.....

4 April 2013, 15:53

Speedman
I'm going with a third option, well it's the second if you go chronologically... Matt green, should be fun weathering it in this scale.

4 April 2013, 21:22

Speedman
OK, this has now turned into a twin project. I bought a F-Toys F-100D pre-painted model for the drop tanks and other bits, I noticed it was a little short to be a "D" but could be turned into a F-100A with a little work.

8 May 2013, 14:08

Album info

OOB build.

F-100D Supersabre

45 immagini

1:144

Completato

Tutti gli album

Visualizza tutti gli album »