SKP Model - Zetor 25 -

1
January 16, 2015
cover
2
January 16, 2015
3
January 16, 2015
4
January 16, 2015
5
January 16, 2015
6
January 16, 2015
v-belt is wrong because normally there are two, but in the end it is not so visible
7
January 16, 2015
foot pedals mounted
8
January 16, 2015
9
January 16, 2015
front axle was trenched and glued together again in a smooth left direction
10
January 16, 2015
i made a little bolt for the front axle to the oil cooler. now its movable
11
January 16, 2015
small and smallest parts...
12
January 16, 2015
the PE parts
13
February 13, 2015
Little Update here: Lots of PE Parts glued together. More than 30 bolt heads needed to be folded and glued in place
14
February 13, 2015
very tricky to bring the parts in place
15
February 13, 2015
some bolt heads missing right now. they're less than one millimeter :-/
16
February 13, 2015
thats the stand after work…to be continued...
17
February 24, 2015
tow-bar glued to the rest
18
February 24, 2015
rod for clutch made from 0,4 mm wire
19
February 24, 2015
steering rod and exhaust mounted
20
February 24, 2015
little hole to the exhaust end
21
February 24, 2015
what is ptno. A18 in real life?
22
February 24, 2015
last for today, the horn
23
March 2, 2015
the base with the first two pe parts and a scratch made rod
24
March 2, 2015
work goes on...
25
March 2, 2015
Framework for the seat ready
26
March 2, 2015
other side
27
March 2, 2015
with seat in place
28
March 2, 2015
29
March 2, 2015
On the Zetor (not glued)
30
March 2, 2015
the hole thing…think I need to do some wiring on the motor… so long for today.
31
March 3, 2015
Headlights and Zetor sign
32
March 3, 2015
wired right...
33
March 3, 2015
..and left
34
March 3, 2015
left mudguard outside and rear light
35
March 3, 2015
right mudguard outside
36
March 3, 2015
left mudguard inside
37
March 3, 2015
right mudguard inside
38
March 10, 2015
39
March 10, 2015
40
March 10, 2015
41
March 10, 2015
pin for the tow-bar
42
March 10, 2015
left mud guard mounted
43
March 10, 2015
cables in place
44
March 10, 2015
cables for the spark plugs
45
August 27, 2015
some masking was made
46
August 27, 2015
47
August 27, 2015
48
August 27, 2015
i made some rings out of plastic sheet
49
August 27, 2015
scratch made bar to pull all the rings
50
August 27, 2015
the rings connected together with bolts. pulling bar is mounted. all together is called "Wiesehobel" A tool for farmers to pull with the bulldog to destroy molehills on grass fields.
51
August 27, 2015
the farmer himself also arrived, is builded and primed
52
August 27, 2015
front wheels primed
53
August 27, 2015
steering wheel mounted
54
August 27, 2015
dashboard film is painted white from behind an glued to the PE part
55
September 4, 2015
here we see the base - fresh from the lumber mill
56
September 4, 2015
15° - like the grass field here in the black forrest - need to be sanded to make it nice and fine
57
September 4, 2015
number plates - made with illustrator - printed on white decal sheet - cut out and painted with Tamiya clear coat- yes, I made a few… 🙂 - FR is for Freiburg, ES is the abbreviation of the man who's having birthday, 1935 is his year of birth
58
September 4, 2015
the "Wiesehobel" is also primed
59
September 7, 2015
The base is sanded. Top is painted with Tamiya flat brown.
60
September 7, 2015
Other side
61
September 7, 2015
Downside is covered with self adhesive felt.
62
September 7, 2015
the gras mat is cut in shape, not glued to the base
63
September 8, 2015
Today I made last wiring
64
September 8, 2015
So I can prime this thing and painting can start. I think then this thread will be a bit more interesting
65
September 17, 2015
Zetor main body after priming in a zenithal lighting way
66
September 17, 2015
after two layers of very diluted base color. Its Tamiya cockpit green with a few drops of white
67
September 17, 2015
68
September 17, 2015
engine hood with base color
69
September 17, 2015
70
September 17, 2015
the seat with base color and the headlights painted black and the inside painted with chrome silver
71
September 17, 2015
the back wheels painted; rubber black, base color & tamiya red
72
September 17, 2015
front wheels
73
September 17, 2015
back light inside also painted with chrome silver
74
September 20, 2015
the Zetor 25 Decal is in position
75
September 20, 2015
we had a little wedding here…the front axle is glued to the main body
76
September 20, 2015
I brushed a very thin and diluted layer of Tamiya "Smoke". Main direction from the downside to have a second layer of shadow. After that I started a first step of weathering with oil colors
77
September 20, 2015
The after first step of weathering
78
September 20, 2015
And we ca see, how the Zetor becomes slowly to "live". First details also have been painted. Exhaust got his first "red brown" layer
79
September 20, 2015
other side
80
September 20, 2015
Numberplate and tail lights are also in position
81
September 20, 2015
Head light lenses also in position
82
September 20, 2015
wheels processed with oils
83
September 20, 2015
the farmer got his first pre shading
84
September 23, 2015
After a few rounds of chipping and weathering the Zetor looks like this
85
September 23, 2015
there still some things to do
86
September 23, 2015
but slowly the Zetor comes near the finish line
87
September 23, 2015
88
September 23, 2015
thanks for looking! 🙂
89
September 27, 2015
We had a second wedding here…the seat is glued to the main body
90
September 27, 2015
This is how the Zetor looks after another few rounds of weathering with pigments and oils
91
September 27, 2015
for the mud inside the mudguards I used acrylic resin mixed with tamiya "flat brown" and two kinds of sand
92
September 27, 2015
93
September 27, 2015
94
September 27, 2015
95
September 27, 2015
96
September 27, 2015
97
September 27, 2015
Thank U for looking!
98
September 27, 2015
And a little pre-few with the two right wheels on (not glued) direct from the workbench. Here are a few things to do…see u next time!
99
October 2, 2015
So…I got a bit further on. Wheels are mounted, the Wiesehobel is ready and glued to the base
100
October 2, 2015
101
October 2, 2015
102
October 2, 2015
The Wiesehobel was a bit to big for the base…So I cut the rest of
103
October 2, 2015
The Zetor is not glued to the base
104
October 2, 2015
105
October 2, 2015
106
October 2, 2015
107
October 2, 2015
108
October 2, 2015
I also painted "Ernst". The farmer. Here is his head. Figure painting is not so my cup of tea and needs much more practice.
109
October 2, 2015
He's wearing his normal blue working trousers and his mint-green shirt
110
October 2, 2015
Thank you for looking! Have fun!
111
October 5, 2015
Normaly when Ernst drives the bulldog "Bunny" is around. She looks a bit like this dog
112
October 5, 2015
After building it needs to be filled with green putty & sanded a bit. Neckless is Tamiya Tape
113
October 5, 2015
Tamiya rubber black is base color. Eyes & nose painted with glossy black
114
October 5, 2015
Tongue is Tamiya flat flesh with a bit red brown and red
115
October 5, 2015
Then dry brushed with flat white. Thanks for looking!
116
October 7, 2015
Hi there. I call this ready. Today I fixed the "Wiesehobel" decal witch I made with photoshop. After the decal totally dried I coated the wooden base with semi gloss clear.
117
October 7, 2015
118
October 7, 2015
119
October 7, 2015
120
October 7, 2015
121
October 7, 2015
Now some detail shots
122
October 7, 2015
123
October 7, 2015
124
October 7, 2015
125
October 7, 2015
I cut of 3 chain links so that the zetor got a bit away from the edge
126
October 7, 2015
127
October 7, 2015
128
October 7, 2015
129
October 7, 2015
130
October 7, 2015
131
October 7, 2015
At last the Wiesehobel in detail. Tomorrow I will make some photos outside in the original surrounding of that scene. Thank U for looking!
132
October 8, 2015
Here are some outdoor shots in the real surrounding where the "Wiesehobel" will be used normaly in April
133
October 8, 2015
sorry but the trees in the background show harvest :-/
134
October 8, 2015
135
October 8, 2015
136
October 8, 2015
137
October 8, 2015
138
October 8, 2015
139
October 8, 2015
140
October 8, 2015
141
October 8, 2015
142
October 8, 2015
143
October 8, 2015
144
October 8, 2015
These are the last pictures for this post. This was a gift…and it is given. The birthday child was quite happy with it.
145
October 8, 2015

Commenti

16 January 2015, 16:56

Christian Bruer
Interesting subject, very nice kit and a good start on it.

16 January 2015, 17:43

Jonns Pfeiffenberger
I'm in, der hat mir schon immer gefallen!

16 January 2015, 18:08

Christian Bruer
Wow, very clean PE work. I really like it!

13 February 2015, 17:26

Es-haq Khosravi
Great job Ben!

24 February 2015, 23:22

Leif Adams
I am going to follow this one. Awesome.

25 February 2015, 03:29

Ben Decker
Thank you folks 🙂

3 March 2015, 21:37

Choppa Nutta
Interesting subject, like it! 🙂

27 August 2015, 22:45

Leif Adams
Lookin' good, Ben! What made you choose this kit?

8 September 2015, 23:28

Calvin Gifford
And now for something different! Very nice!

8 September 2015, 23:45

Ben Decker
Hi Leif, I Iike the bulldogs since I'm child. And when I saw this kit the first time it was clear that I need to buy it. And now I have an actual reason to build it. My neighbors 80s birthday. He was a farmer all his life and is it still. This will be my present for him.

9 September 2015, 15:01

Calvin Gifford
That is awesome!

9 September 2015, 19:30

Urban Gardini
What a wonderful idea and marvelous work so far with the PE and wiring. This I really want to see all the way to the finish line!

17 September 2015, 22:13

Hanno Kleinecke
This is going to be a real piece of art, from build to paintwork, just beautiful !

26 September 2015, 11:50

Christian Ristits
You are a master, top!

26 September 2015, 12:44

Jonns Pfeiffenberger
Beautiful! Einfach nur geil! 👍 👍

26 September 2015, 15:11

Ben Decker
Thank you folks for your kind compliments! I'm glad that you like my Zetor. Today I post the last update without wheels…thank u for looking and have fun.

27 September 2015, 19:54

Szilárd Kun
Nice job!

3 October 2015, 06:36

Christian Meyerhoff
Excellent job!

3 October 2015, 07:18

Urban Gardini
First class, nothing else but pure excellence!

7 October 2015, 21:38

Es-haq Khosravi
Awesome!!!

7 October 2015, 22:26

Choppa Nutta
masterful

8 October 2015, 00:18

Dave Adel
Wonderful. Great job and subject.

8 October 2015, 00:43

Scott Hastings
I like everything about this build....the tractor, the grass, the dog, the figure and the excellent painting and weathering work.
Really a lovely diorama, well done

8 October 2015, 01:01

Pavel Pinzhin
Awesome it is! All the hard work is evidently resulted in a masterpiece to behold!

8 October 2015, 01:02

Ulf Petersen
What a beautiful scene, Ben!😮
The paintwork and the weathering is superb! The whole composition is phantastic. Everything fits, great! 👍

8 October 2015, 05:03

Rui S
Great model Ben, the paint job is beautiful,.
Your friend is a lucky guy and he will love it. Congratulations

8 October 2015, 12:49

Cristian Bordina
...the most beautiful tractor that I have ever seen 🙂

8 October 2015, 15:19

Christian Lehmann
Very nice idea and scenery . Realistic wethering of the trctor.

8 October 2015, 15:23

Aghis Barberopoulos
What a nice and original idea! Very well done, lovely tractor and setup.

8 October 2015, 16:11

Christian Bruer
Very nice finish on the tractor, figures and display!

8 October 2015, 17:51

Bernhard Schrock
Sehr erfrischend. Klasse gebaut und in Szene gesetzt. Der Gesichtsausdruck der Figur ist genial getroffen. Hut ab!!!

8 October 2015, 19:12

Petr Štěpaník
Excellent job! Perfect!

8 October 2015, 19:27

Erik Leijdens
Indeed very beautiful! 👍

8 October 2015, 19:29

Acki
Amazing! I love it!

8 October 2015, 20:00

Ben Decker
Thank U ones again for your kind compliments. I like it that you like it. See some outdoor shots at last in this album. Now the gift is given!

8 October 2015, 21:54

Holger Kranich
Coole Szenerie! Günther der Treckerfahrer hätte seine Freude daran! 😄

19 November 2015, 10:08

Philip De Keyser
Something different but a fantastic job, I love it 👍

19 November 2015, 17:52

Album info

Little update on the Zetor.

02.03.15 - Today I made the driver seat. Or should I say farmer seat?
However, 22 PE and 2 resin parts needed to be glued together. You can see thee result in the following pictures.

03.03.15 - Today I made the headlights and filled some bubble holes on the bonnet.
Left and right mudguard have been wired. Rear light on the left mudguard also.

05.03.15 - I started to prepare the rear wheels. I tried to give them a good used look. Therefor I rolled the wheels along the blade of a saw. To see the result I sprayed one of the wheels with primer.

09.03.15 - I made a little pin for the tow-bar. Left mudguard is mounted. Wiring also. I also did some wiring on the motor.

Thanks for looking and have fun!

Zetor 25A

145 immagini

1:35

Completato

Tutti gli album

Visualizza tutti gli album »