Eduard Roland C.II - 'Walfish', (Whale).

1
July 20, 2017
Very nice set of PE parts. No.32 might be a challenge.
2
July 20, 2017
The 'fish scale' pattern.
3
July 20, 2017
4
July 20, 2017
5
July 20, 2017
6
July 20, 2017
7
July 29, 2017
wooden rings are in evidence in the model interior and are rather unusual in that they all slope.
8
July 29, 2017
To start with I painted on a diluted mid-tone brown
9
July 29, 2017
Afer a coat of gloss varnish to seal things I mixed up a darker brown by adding a little black to the original brown
10
July 29, 2017
With the bulkhead in place and the camera trap door painted in it all starts to make sense
11
August 8, 2017
The window panels need some serrious trimming to fit. Also dont fit the throttle till the PE dash is in place. It wont fit with the line up holes. The PE dash is slighly oversize and you need to adjust the throttle down a bit.
12
August 8, 2017
Just trying out the main elements for fit. Not bad. None of the bulkheads are actually upright which makes lining up a bit tricky. Note - removed throttle.upright
13
August 8, 2017
And with a few more things in place. I like the PE belts. Very nice. Mind you I wouldnt want to loop the loop. Surely they must have had more belts than this ?
14
August 8, 2017
I have finally settled on a very pale green. I tried a blue first but no......The wings have had three coats of enamel and a top layer of varnish to seal.
15
August 9, 2017
Now need to tone down the gaps between the spars with some weathering. Now it gets interesting.
16
August 9, 2017
The PE parts certainly do add some nice detail. I particularly like the camera with the pistol shutter release. And the little radio tuner - v.nice. The painting is a bit rough but works ok at scale.
17
August 12, 2017
Experimenting with highly dilute brown/black wash. First time I have tried this technique so should be interesting.
18
August 12, 2017
Yes that kinda works ok. Once the main fuselage is weathered it will work a bit better.
19
August 16, 2017
With nearly all the interior kitted out its getting a bit cramped. I am going to be quite reluctant to say farewell to this interior but it really is time to say goodbye.
20
August 16, 2017
I found the camera had to be moved further back and down than in the instructions. I dont think that matters much. ASfter all it was a hand held camera so could go anywhere.
21
August 20, 2017
The set of five decals joined up fairly well. Fitting around the window frames was the starting point and then they nicely floped into position. The geometric pattern did not line up exactly but I got an acceptable result.
22
August 20, 2017
A little trimming of the decals was required after setting. All of the windows had to be cut out from the decal.
23
August 29, 2017
24
August 30, 2017
With a few more bits stuck in place and the rigging painted its starting to come together.
25
September 5, 2017
I think Eduard have made rather hard work of this by requiring major surgery on the provided gun parts
26
September 3, 2017
The Parabelum LMG 14cal.
27
September 5, 2017
Spandau LMG 08
28
September 5, 2017
29
September 5, 2017
The main components of the gun assembly.
30
September 11, 2017
31
September 11, 2017
32
September 11, 2017
33
September 11, 2017
34
September 11, 2017
35
September 11, 2017
36
September 11, 2017
37
September 11, 2017
38
September 11, 2017
39
November 5, 2017

Commenti

20 July 2017, 11:54

Dave Flitton
Watching!!

20 July 2017, 19:11

Erik Leijdens
Me too. Interesting aircraft. Got this kit in the stash too

29 July 2017, 17:42

Christian Grimm
I will watch this build. 🙂

8 August 2017, 21:28

Mike Daniels
Its coming along nicely, mostly. Just a few gotchas mentioned in the captions.

8 August 2017, 21:41

Wim van der Luijt
I've had this one in my hands more than once....watching with interest!

10 August 2017, 08:05

Martin Oostrom
Looks fine

13 August 2017, 07:34

David Thor
Looking good! Always amazed and inspired by the effort and techniques people put into the wood and canvas of wwI planes.

13 August 2017, 08:40

Mike Daniels
Thank you Martin and David. Its a bit of an experiment this technique, but so far, so good.

13 August 2017, 09:43

David Thor
Wow, how did you do the "scales"?

21 August 2017, 06:48

Mike Daniels
Hi David - decals. They come with the kit.

21 August 2017, 11:18

Erik Leijdens
Looking good Mike!

21 August 2017, 12:25

David Thor
Looks great and not like a decal at all. At first glance i guessed you masked that off and sprayed the scales. 😮

21 August 2017, 14:34

Mike Daniels
Thanks Eric. I am enjoying the build. There is a lot in this little Eduard kit so i'm taking my time over it. The decals are really good David, if a little tricky. Not sure you could achieve such a concise result by masking and spraying. Might be a challenge to try one day!!

21 August 2017, 14:46

Stephan Ryll
Lookin good 👍

21 August 2017, 18:18

Alec K
Nicely done Mike 👍

30 August 2017, 02:27

Cuajete
Well done, Mike!

30 August 2017, 18:30

Mike Daniels
Thanks very much Stephen, Alec and Cuajete.

I am getting into the final stretch now. I am pretty new to rigging so please forgive my crude first attempt at making eyelets. It is an art form all of its own!!

Now, just need to put together the machine guns with a lot of separate PE parts. Gulp!

30 August 2017, 22:30

David Thor
The rigging looks amazing!

31 August 2017, 07:31

Choppa Nutta
I like this, nice work 🙂

31 August 2017, 09:11

Tim Heimer
Beautiful plane, Nice work!

31 August 2017, 13:37

Martien Lourens
Excellent work.

31 August 2017, 16:13

Mike Daniels
Thanks very much David, Choppa, Timothy and Martien. Yes it is a nice looking plane/model. Unusual as well. I would certainly be happy to build another one. Maybe the Wingnut Wings versions;

wingnutwings.com/ww/product?productid=3109
wingnutwings.com/ww/product?productid=3110

They look fab. Mind you they all do. Just kinda pricey but probably worth it.

31 August 2017, 17:44

Taarna Eckart
Wow, well done for sure, Mike! 👍

31 August 2017, 19:21

Michael Phillips
Wow, this is really awesome! What a cool scheme and you nailed it.

31 August 2017, 19:54

Mike Daniels
Thanks Taarna and Michael. Yeah its a great scheme. I was really torn between this and another of the options in the Eduard kit.

[img1]

See what I mean ? They are all really cool.
Oh well, just have to buy another one.

31 August 2017, 20:51

Choppa Nutta
that one looks more like a racing livery 😄
Love the little gunners window with a curtain 😉

31 August 2017, 22:09

David Thor
Would love to see you do the other scheme. Especially with those nice curtains in the windows. 😄

1 September 2017, 07:18

Erik Leijdens
Great job Mike!

1 September 2017, 08:29

Mike Daniels
Yes I am tempted David. They are a nice touch and come as decals in the kit. Got a few more on the bench first.

1 September 2017, 09:15

Mike Daniels
Thanks Erik.

1 September 2017, 09:15

Tim Heimer
my vote is for the late Roland.

1 September 2017, 12:01

Glenn
That's great Mike. Very interesting!

6 September 2017, 04:40

Mike Daniels
Thanks Glenn. I like your ID icon. V.funny. Unless you live in Guam.

6 September 2017, 12:45

Glenn
Or any other place outside of NK on his list!

7 September 2017, 05:41

Mike Daniels
And I think that's it pretty much. Had great fun with this model. A real challenge.

11 September 2017, 17:58

Cuajete
Very nice, Mike. Congratulations!

11 September 2017, 18:02

David Thor
Beautiful finish! Good job.

11 September 2017, 18:22

Mike Daniels
Thanks Cuajete and David.

11 September 2017, 22:17

Wim van der Luijt
Good job on the Walfish! A nice addition to your collection....

5 November 2017, 09:22

Jean Pierre CULIS-FERY
Magnifique! Très beau travail. Best regards from France.

5 November 2017, 09:30

Alistair Graham
Looks great Mike

5 November 2017, 09:52

Album info

Step by step build.

You can read a more detailed blow by blow account of this build on my personal website at;

sites.google.com/sit..3-eduard-roland-c-ii

Eduard Roland C.II 'Walfish' (Whale).

39 immagini

1:48

Completato

Tutti gli album

Visualizza tutti gli album »