Bacheca
Wall
November 20, 2024
Jon Bryonaggiunto un nuovo album fotografico.
All comments (6) » 21 30 May 2019, 02:34
Jon Bryonaggiunto un nuovo album fotografico.
All comments (7) » 38 10 December 2022, 14:05
November 19, 2024
Jon Bryonaggiunto un nuovo album fotografico.
35 immagini
Trumpeter 1/48 Sukhoi Su-15TM 'Flagon-F'
1:48
Progetto: Trumpeter 1/48 Sukhoi Su-15TM 'Flagon-F'
2+ 8 30 May 2019, 02:41
Jon Bryonaggiunto un nuovo album fotografico.
82 immagini
Revell (ICM) 1/48 Supermarine Spitfire LF.XVI
1:48
Progetto: Revell 1/48 Supermarine Spitfire LF.XVI
11 24 May 2022, 14:21
Jon Bryonaggiunto un nuovo album fotografico.
36 26 March, 11:41
Bernhard SchrockAmazing that I have overlooked this album so far. Also amazing that there are no comments here yet!
John: You built an absolutely remarkable helicopter. A very realistic look/ weathering and a super detailing. I really liked your rotor in which you used parts of Anyz Models. Also remarkable the raised rivets. By the way, I experienced a dejavu in some places 🙂🙂
28 August, 09:13
Jon BryonThank you so much Bernhard. Your MH-53 sets the standard as the best Super Stallion I've ever seen and I looked at your album many times. I only wish I could scratchbuild stuff like you!
I'm also annoyed ResKit are about to release new engine pods that would have made our lives so much easier 🙂 🙂
28 August, 11:59
Zbynek HonzikBeautiful job. Very realistic weathering! 👏👏👏
How is it possible that I missed this album? 🧐
19 November, 22:20
Jon Bryonaggiunto un nuovo album fotografico.
All comments (5) » 20 30 May 2019, 02:32
November 16, 2024
Jon Bryonaggiunto un nuovo album fotografico.
All comments (7) » 23 14 September 2020, 15:44
Jon BryonBernard, that is high praise indeed! It's a difficult kit in many ways, but I really enjoyed it.
16 November, 15:38
Bernhard SchrockJon, I read your article twice at HS. Thank you for the detailed description. I will definitely use your advice for the canopy and the roofs. I have already noticed that you have to check the fit of the parts.
16 November, 15:49
November 14, 2024
Jon Bryonaggiunto un nuovo album fotografico.
All comments (10) » 25 30 May 2019, 02:45
Bernhard SchrockTop job especially the flawless finish. I like you definition of gloss. 🙂🙂
14 November, 10:17
October 24, 2024
Jon Bryonaggiunto un nuovo album fotografico.
All comments (7) » 33 21 June 2023, 12:04
S BHey Alessandro, I was wondering too and made a quick Google search: theaviationgeekclub...ic-carrier-landings/ . 😁
24 October, 14:36
Jon Bryonaggiunto un nuovo album fotografico.
All comments (20) » 86 18 September 2023, 17:44
October 23, 2024
Jon Bryonaggiunto un nuovo album fotografico.
33 immagini
Tamiya 1/48 de Havilland Mosquito FB.VI - Completed
1:48
Progetto: Tamiya 1/48 de Havilland Mosquito FB.VI
1+All comments (20) » 70 30 September, 14:07
September 30, 2024
Jon Bryonaggiunto un nuovo album fotografico.
50 immagini
Tamiya 1/48 de Havilland Mosquito FB.VI - In Progress
1:48
Progetto: Tamiya 1/48 de Havilland Mosquito FB.VI
1+ 7 30 September, 14:01
September 29, 2024
August 29, 2024
Jon Bryonaggiunto un nuovo album fotografico.
8 17 February 2022, 14:37
Capt BellingerThat is one gorgeous Shagbat. I'll be following this with real interest.
17 February 2022, 14:44
Jon BryonThanks. I finished it today. Hopefully have photos online tomorrow and an article in SAM later this year.
17 February 2022, 14:50
Bernhard SchrockPic 5 & 7. Jon: did you soldered the brass parts tougher? I suppose for better strength?
Pic 1: what kind of fluid is it in the injection syringe?
I looked at everything again in a quiet minute: great! I particularly like the dirty, used surface of the aluminum paint.
One half of the bulb is clear the other is colored! Very well researched. 🙂 🙂 🙂
If anything, I would only have a sole proposal for you for the wiring, which looks very fine on your model.
The airplanes of this time often had flat profiles instead of wires (metal rope). Have you already tried the flat profiles of SBS model?
28 August, 14:55
Jon BryonThank you again for your comments Bernhard!
The brass is soldered together where I can just because I hate using CA to stick PE together. Mainly for better strength.
The fluid in the syringe is flux. It's Nokorode Regular Paste Flux. It allows very precise application of the flux.
I know that the rigging is not very accurate. I don't rig aircraft very often (this was the second, and I've not done any since), so I want to get something neat to start with rather than accurate. Maybe in future I will do better!
29 August, 01:53
August 28, 2024
Jon Bryonaggiunto un nuovo album fotografico.
All comments (24) » 43 6 April 2022, 13:21
Jon BryonThanks Bernhard. As one of my modelling heroes, your praise is much appreciated!
28 August, 11:57
Jon Bryonaggiunto un nuovo album fotografico.
50 immagini
Airfix 1/48 Supermarine Walrus Mk.I - finished
1:48
Progetto: Airfix 1/48 Supermarine Walrus Mk.I
2+All comments (22) » 62 18 February 2022, 13:34
August 22, 2024
June 24, 2024
June 16, 2024
Jon Bryonaggiunto un nuovo album fotografico.
All comments (5) » 16 15 June, 10:45
Jon BryonThanks Thomas and Curatorm. The build was okay. The fit is generally fine (except for the intakes in my case) but the moulding is not brilliant in lots of places. I had to rescribe all the panel lines as lots of the them were too shallow.
16 June, 18:44
June 15, 2024
May 1, 2024
Jon Bryonaggiunto un nuovo album fotografico.
35 immagini
Eduard 1/48 Supermarine Spitfire Mk.IXe Completed
1:48
Progetto: Eduard 1/48 Supermarine Spitfire Mk.IXe
15 1 May, 10:29
Jon Bryonaggiunto un nuovo album fotografico.
53 immagini
Eduard 1/48 Supermarine Spitfire Mk.IXe In Progress
1:48
Progetto: Eduard 1/48 Supermarine Spitfire Mk.IXe
2 1 May, 09:58
April 17, 2024
Jon Bryonaggiunto un nuovo album fotografico.
All comments (10) » 18 30 September 2019, 12:53
NeulingPerfect! Very clean, detailed and realistic looking build. It´s a joy to watch it.
30 September 2019, 17:48
March 27, 2024
March 26, 2024
March 25, 2024
Jon Bryonaggiunto un nuovo album fotografico.
17 25 March, 16:32
TreehuggerUsure if you already finished, but the bend probe pole can probably be straightened, by holding the resin part vertically in near boiling hot water for half a minute or more. Then it should straighten itself out, the thicker the resin the more diffucult it is to change the resin I suspect, unsure. I only did that with Eduard's Brassin 1:48 Sidewinder missiles in resin, and it worked.
25 March, 16:46
Jon BryonThanks - the model is finished and the probe was straightened as you suggest. Finished photos should be done tomorrow.
25 March, 17:55
Jon Bryoncompletato questo oggetto
Rotor CH-53 Super Stallion/MH-53E Sea Dragon (7 blades, 3 engines) for Academy 
ResKit 1:48RSU48-0021
ResKit 1:4825 March, 16:18
Jon Bryoncompletato questo oggetto
Tail rotor for СH-53E Super Stallion/MH-53E Sea Dragon ResKit 1:48RSU48-0037
ResKit 1:4825 March, 16:18
Jon Bryoncompletato questo oggetto
CH-53E - Cargo Seatbelts for Academy, MRC
Eduard 1:48
49026 2006 Nuovo stampo Argomento multiplo (1!!)25 March, 16:18
March 14, 2024
March 6, 2024
February 1, 2024
Jon Bryonaggiunto un nuovo album fotografico.
All comments (6) » 11 30 May 2019, 02:00
Jon BryonThey were from Archer Fine Transfers. I've started using the Eduard ones instead. They are better.
1 February, 21:52
January 27, 2024
Jon Bryonpossiede questo oggetto
USN
T-34B Mentor "VT-5 Training Air Wing" Academy/Minicraft Academy 1:48
12361 2023 Nuove decalcomanie 27 January, 16:21
January 24, 2024
January 8, 2024
January 5, 2024
December 23, 2023
December 21, 2023
December 15, 2023
December 5, 2023
wnolder.php?lang=it
2023-12-05 11:57:31
2011-05-09 05:18:19
10346
/ajax/wnolder.php?lang=it&sd=2023-12-05 11:57:31&md=2011-05-09 05:18:19&filter=&w=10346
todo