Duo Discus
Commenti
![](/profiles/img/24497-497-s.png)
Here is something a little different, at least for me, it is a simple project to do whilst I wait for modelling supplies to arrive as the post is taking much longer than usual due to the lock-down.
![](/profiles/img/24497-497-s.png)
Thanks for the heads-up John! I'm making steady progress now. However part #E52 is 1.5mm too short so doesn't reach its locating points so I have had to employ a bodge-job! But you have to stare at it to notice 🙂
![](/profiles/img/24497-497-s.png)
Fuselage halves together now and seems sanded. Wings & tail-plane to go on next before primer.
![](/profiles/img/24497-497-s.png)
Wings on & in primer. I managed to snap off the pitot tube on the tail, so that has been replaced with a length of styrene rod. After a light sanding she is ready for its gloss coat, but not until the weather cools down!
Album info
The Duo Discus replaced the Janus as Schempp Hirth's high-performance two-seater trainer. Although it shares its name with the highly successful Standard Class Discus, any resemblance is only superficial. It first flew in 1993 and is still in production at the factory in Orlican in the Czech Republic. It has a 20-metre four-piece wing that is slightly swept forward so that the rear pilot is close to the centre of gravity. Its best glide ratio was measured as 44:1. An optional 'turbo' retractable two-stroke engine can be specified for extended gliding sessions. Over 500 Duo Discuses had been built by August 2007. Its chief rival is now the DG Flugzeugbau DG-1001.
A revised model the Duo Discus X was announced in 2005. This has landing flaps incorporated into the movement of the air-brake lever to improve its approach control, giving steeper and slower approaches, it also has winglets to improve thermal flying and a sprung and lower retractable undercarriage. This makes it slightly harder to get in because the