A Pair of 1:18 Fw-190s
![Album image #1 Album image #1](/albums/img/6/9/9/1379699-78214-46-720.jpg)
I have really fond memories of the 1/18 "toy" aircraft models by 21st Century Toys from my teenage years. Their size really made up for not being 100% accurate or detailed. Many of mine were taken apart and customized, but I always dreamed that they would release them in true "kit form".
This project is (hopefully) what I wish I would have been able to do to my 21st Century 1/18 airplanes when I was younger. I am looking to correct some inaccuracies and add some extra detail here and there, but not splitting hairs by going for 100% accuracy.
This project is (hopefully) what I wish I would have been able to do to my 21st Century 1/18 airplanes when I was younger. I am looking to correct some inaccuracies and add some extra detail here and there, but not splitting hairs by going for 100% accuracy.
![Album image #2 Album image #2](/albums/img/6/5/5/1379655-78214-33-720.jpg)
The Magic Scale Modeling set will be used on one of the Fw-190s to provide a spinning propeller, lights, and sounds during an engine run sequence. The other 190 will be a static model.
![Album image #3 Album image #3](/albums/img/6/5/6/1379656-78214-75-720.jpg)
Aftermarket
![Album image #4 Album image #4](/albums/img/6/5/7/1379657-78214-61-720.jpg)
Hobby boss designed the propeller backwards. It causes a very awkward look if left uncorrected.
Uncorrected (left) vs corrected (right)
Uncorrected (left) vs corrected (right)
![Album image #5 Album image #5](/albums/img/6/5/8/1379658-78214-48-720.jpg)
Correcting the propeller is pretty easy.. just cut this piece off and glue it on the opposite side
![Album image #6 Album image #6](/albums/img/6/6/6/1379666-78214-16-720.jpg)
Spinner comparison
The kit spinner is too long and the propeller cutouts should be squared-off at the bottom
The kit spinner is too long and the propeller cutouts should be squared-off at the bottom
![Album image #7 Album image #7](/albums/img/6/6/9/1379669-78214-63-720.jpg)
The spinner was sanded down
![Album image #8 Album image #8](/albums/img/6/7/0/1379670-78214-91-720.jpg)
The propeller cutouts were shortened and squared-off by using a photo-etch saw on top of a feeler gauge (to ensure equal length cuts)
![Album image #9 Album image #9](/albums/img/6/6/7/1379667-78214-19-720.jpg)
The hole at the front was drilled out
![Album image #10 Album image #10](/albums/img/6/8/7/1379687-78214-72-720.jpg)
Hobbyboss did not design the cooling fan to be attached to the propeller. I glued it to the base of the spinner, so it will spin when the propeller spins (like on the real Fw-190).
![Album image #11 Album image #11](/albums/img/6/8/5/1379685-78214-31-720.jpg)
The finished (modified) propeller/spinner assembly
![Album image #12 Album image #12](/albums/img/6/0/6/1379606-78214-93-720.jpg)
Sturmstaffel 1 spinner progress (part 1)
I started using some Tamiya "masking tape for curves", but it didn't work towards the tip. I used it as a guide for placement of thin strips of regular masking tape.
I started using some Tamiya "masking tape for curves", but it didn't work towards the tip. I used it as a guide for placement of thin strips of regular masking tape.
![Album image #13 Album image #13](/albums/img/6/0/7/1379607-78214-12-720.jpg)
Sturmstaffel 1 spinner progress (part 2)
I thought the black part of the spiral turned out a little too thin after the first attempt. I decided to attempt re-masking and paint again. Luckily, it turned out like I hoped.
I thought the black part of the spiral turned out a little too thin after the first attempt. I decided to attempt re-masking and paint again. Luckily, it turned out like I hoped.
![Album image #14 Album image #14](/albums/img/6/0/8/1379608-78214-75-720.jpg)
Sturmstaffel 1 spinner vs. reference photo
Some touchups are still required, but overall I'm pretty happy with how it turned out.
Some touchups are still required, but overall I'm pretty happy with how it turned out.
![Album image #15 Album image #15](/albums/img/5/9/9/1379599-78214-51-720.jpg)
JG3 spinner progress
![Album image #16 Album image #16](/albums/img/5/8/6/1379586-78214-26-720.jpg)
JG3 spinner vs. reference photo
![Album image #17 Album image #17](/albums/img/6/2/7/1379627-78214-74-720.jpg)
Propeller painted Mr. Color RLM70
![Album image #18 Album image #18](/albums/img/6/2/8/1379628-78214-90-720.jpg)
Tonal variation was added using 90% RLM70 + 10% white sprayed through a scrubbing pad
![Album image #19 Album image #19](/albums/img/6/2/6/1379626-78214-60-720.jpg)
Propeller wear vs. reference photo
I wish I would have done an additional layer with another lighter shade, but I was worried about over-doing it and ruining the effect.
I wish I would have done an additional layer with another lighter shade, but I was worried about over-doing it and ruining the effect.
![Album image #20 Album image #20](/albums/img/6/4/8/1379648-78214-94-720.jpg)
propeller blades masked
![Album image #21 Album image #21](/albums/img/6/4/9/1379649-78214-16-720.jpg)
propeller hub painted white aluminum (AK Xtreme Metal) and sealed with a gloss clear (Tamiya X-22)
![Album image #22 Album image #22](/albums/img/6/5/0/1379650-78214-35-720.jpg)
oil wash applied using Abteilung shadow brown
![Album image #23 Album image #23](/albums/img/6/8/6/1379686-78214-77-720.jpg)
Magic Scale Modeling electric motor installed
![Album image #24 Album image #24](/albums/img/6/5/1/1379651-78214-25-720.jpg)
Engine detailing progress
Hobby Boss apparently just gave up on the engine lol. The cylinder heads (which aren't very visible) are there. The rest had to be scratch built. I wasn't going for 100% accuracy so a lot of artistic license was used.
Hobby Boss apparently just gave up on the engine lol. The cylinder heads (which aren't very visible) are there. The rest had to be scratch built. I wasn't going for 100% accuracy so a lot of artistic license was used.
![Album image #25 Album image #25](/albums/img/6/9/0/1379690-78214-15-720.jpg)
The real BMW801 had aluminum cylinder heads. I used a darker shade to hopefully create a sense of "shadow" from being inside the cowling with little direct sunlight.
![Album image #26 Album image #26](/albums/img/6/8/9/1379689-78214-70-720.jpg)
The engine was painted, an oil wash was heavily applied, and then everything sealed in a clear coat
![Album image #27 Album image #27](/albums/img/6/9/3/1379693-78214-37-720.jpg)
I think I achieved the desired look that I was after. The engine is visible, but the dark color does not make it stand out at most viewing angles.
![Album image #28 Album image #28](/albums/img/6/9/5/1379695-78214-82-720.jpg)
Engine detail on close-inspection
![Album image #29 Album image #29](/albums/img/6/9/4/1379694-78214-25-720.jpg)
The JG3 propeller assembly will be held on with a magnet. The kit's propeller shaft fit is a little loose.
![Album image #30 Album image #30](/albums/img/6/9/8/1379698-78214-58-720.jpg)
Commenti
22 9 January 2023, 21:34