ニュースフィード

Skyhiker
Nice underpainting

Alec K
Great start! Following.

Andrea Brenco
thank you!!!

Juergen Klinglhuber
Looking good !

Skyhiker
Getting better with every photo!

Moreno Baruffini
I totally agree with Skywalker!

Robert Podkoński
Let me join the above praises and viewers 🙂

Jan Peters
Joining too, looking good sofar 👍🏻

Andrea Brenco
Thank you all for your kind words!!!

Skyhiker
Now that is interesting. Cool spaghetti.

Alec K
That squigle pattern looks excellent! What kind of pen is that??

SB Aviation
Awesome

Jan Peters
Ooh, that is very smart looking whitewash👍🏻

Moreno Baruffini
I was hoping to see the "Uniposca technique" in action!
Thank you Andrea, an excellent work so far!

Simon Nagorsnik
I agree, very nice winter camo!
if it doesn't work then I don't know anymore either ...😄

Robert Podkoński
Fantastic effect! (and inspiring technique 😉 )

Thomas Kolb
What a weird camo, but a great idea to represent it! I would never have the guts to even try.

Andrea Brenco
Thanks everybody for your kind appreciation! I wanted to try this since I bought the Hobby 2000 boxing, but later on I discovered that this particular a/c was a G-1 and no other info was available, I decided then to use the Hobby Boss kit I had in my stash with the minimal modification required to calm my modeling consciousness...
I used a UNI-POSCA pen, is water based paint available from stationery and hardware stores in Italy. This is what is wrote on it that it may be useful for a search
www.posca.com
PC-1MR
pin type
0,7 mm
MITSUBISHI PENCIL CO. LTD

HTH

Neil Patrick
Brilliant work Andrea. I bought a paint pen like this months ago thinking it would be ideal for Lutfwaffe squiggles. I haven't yet got round to using it, but your example shows it works brilliantly. That and your talent of course!

Andrea Brenco
Thanks Neil!

Alec K
Thanks for the info Andrea. Found it on Amazon 🙂

Andrea Brenco
you are welcome!

Thomas Bischoff
awesome work!

Andrea Brenco
Thanks Thomas!

Mark K
Wild!

Spanjaard
that is certainly an original Stuka! beautiful

Villiers de Vos
Eye-catching. I also like the mottled effect.

Andrea Brenco
Thanks Mark, Spanjaard and Villiers, appreciate your comments!!!

Łukasz Gliński
Wow, "...because pasta must be eaten al dente"? 😉

Andrea Brenco
🙂 yes, thats's why!!!

Łukasz Gliński
Very cool, love it! 👍

Robert Podkoński
Really cool final effect! Congrats, Andrea!

Robin (WhiteGlint)
Sturzkampfspaghetti.
The camo looks great, nice job! 👍

Andrea Brenco
Thank you all, much appreciated! it has been a really carefree fun build for me, now on to the third one waiting.

Olivier
Pasta e basta !

Bella machina...

Spanjaard
superb!

Alec K
Turned out really great 👍

Daniel Klink
Fully agree with Alec👍👍👍👍👍

Skyhiker
Well done

Jan Peters
Very nice stuka, and the best bit is the fact you really enjoyed this project 👍🏻

David Taylor
Well done.

Andrea Brenco
Thank you very much to all of you, I appreciate every single comment,
Happy modeling everybody!
Andrea

Guy Rump
Missed this, superb result! 👍

Andrea Brenco
thank you!

Gary Victory
Really nice work Andrea. Great camo work Sir.

Andrea Brenco
Thank you very much Gary

Andrea Brenco
Sold this one too, to someone who loves winter camouflage and bought my Ju 88C-6 too!

David Taylor
Well done Andrea.

Denis Dogadov
Great job!
But why was the Hobby Boss kit chosen?
Immediately we see a very thin fuselage.

Andrea Brenco
Thanks a lot David and Denis!
To be honest, I didn't notice the thin fuselage but accuracy wasn't my goal with this build , with hypothetical code markings.
Good to know anyway, thanks for pointing it out!

Mr James
Now thats some great winter camo... What a great build that is. I like it a lot.

Transall NG
Thank you for the information about this pen, and very nice work indeed !

Finn
A gem!

Andrea Brenco
Thank you very much everybody!!!

Pietro De Angelis
Absolutely charming camo!

Andrea Brenco
Grazie Pietro!!!

Dietmar Bogatzki
Nice Start, Andrea 👍

Andrea Brenco
thanks Dietmar!

Juergen Klinglhuber
Woww...👍

Alec K
Nice!

Alex Rodionov
WoW. Nice painting.

Skyhiker
What did you use to make the turnbuckles on your rigging? They look great for this scale.

Andrea Brenco
Thank you!
@Skywalker, I use Part photoetched fret #S72-161, very useful for adding details to biplanes!

Andrea Brenco
Tx Roland

David Taylor
Lovely little build.

John Thomas
Very nice work

Rui S
Niiccceeee👍

Moreno Baruffini
WUNDERBAR!!!

Juergen Klinglhuber
Well done!!

Bart Goesaert
did you brushpaint that camo? Looking really good...

Andrea Brenco
Thank you everybody, really appreciate your comments!
@Bart: I didn't paint that camo, I am not this good with brush. They are decals made by Aviattic, I will write some comments in the pictures soon. Thanks for asking

koch61
suuuper

Neuling
Very attractive dwarf!

Pierre Pierre
beautifull !

Alec K
Lovely 👍

Andrea Brenco
Thank you all 🙂

Artur Z.
Great!

Wiedereinsteige
bellissimo

Stefan Schacht
well done 👍

Julian Herrero aka Yuri
Impressive !,, Good work

Andrea Brenco
Thanks again to everybody!!!

Mike Grant
Nicest Dr.1 I've seen in this scale– possibly any scale! 👍

Andrea Brenco
Hi Mike, thank you, you make me blush ?!!! Have you built that flying pancake yet?

Daniel Klink
What a gem you created here Andrea...wow👍

Mark K
Fabulous!

Gordon Sørensen
Great looking Dr.1, Andrea!

Andrea Brenco
Thank you guys!!! I never had so many appreciations 🙂

Peppy
Super build.

Guy Rump
Great build 👍

Tom O
Beautiful work. This belongs in the Nationals.

Mark K
Truly a jewel!

Neil
Looks fantastic! 👍

Andrea Brenco
Thanks to all of you, a lot!!! sorry for my late replay!

Pierre-Christian Baudru
GREAT JOB !

Andrea Brenco
Thanks!

Pietro De Angelis
Little jewel, congrats as always!

Pepe
Nice!!!

Andrea Brenco
Thannks a lot, guys!!!

Guy Rump
Interesting build, following! 👍

J35J
Thanks Guy, welcome to the project!

Robert Podkoński
Taking a seat!

John
Cool subject! Looks like a lot of work/limited run kit.

J35J
Great Robert! Thanks for your intrest.
This time a limited run kit with all the usual fitting challenges. The plastic moulds are very thick & stiff so it actually feels more like building a resin kit.

J35J
Thanks John for your intrest. I can confirm that there is a lot of work with this one. 😅

Mr D
The exhaust looks very good 👍👍
Where do you get the metal parts??

J35J
Thanks Mr D, the metal parts actually came with the kit this time.
The kit is a limited run will both pro's and con's…😅

S M
Seems challenging kit. Taking a seat here 😄

J35J
S M, you are so welcome!
After getting all major parts together is not that bad. For sure some putty and sanding work but quite ok. As mentioned before the plastic feels very stiff and reacts strange with normal glue. All major parts needs to be reinforced with CA.

Chris T. An
This is the first time for me to tackle a complete resin kit. And when I look at the individual parts, it will be a real challenge. There is an extreme amount of rework needed on each part. Hope I can get it to work.

Finn
Best of luck, it will be interesting to follow

Michael Kohl
I am in too

Robert Podkoński
I will watch with pleasure and interest too.

Alex K
A 3D-printed PZL Dromader???!!! Following for sure!! (The Grand Models cast-resin kit is perhaps above my skills - and I still wait for the Karaya injection one...). Your ag-aircraft & ground equipment dio will turn... monumental! 👍

Marcel Klemmer
Very interesting project👍 I am in

Villiers de Vos
Very nice progress on an unusual subject.

Chris T. An
Thank you all for watching. Alex, I also saw the Grand Models kit for the M18, but I was frightened from some build reviews, there is a lot of rework to do on that kits. I have now the same or a bit more work, but I got the 3D file for free from Thingiverse.

I am really not a Pro in sratch building but I will try to engrave some panel lines and add some more greeblies to the plane. The 3D file is very poor in details.

Alex K
Nice progress! 👍

Robert Podkoński
Fantastic Dromader! (I wish I had one... I have no access to 3d printing, alas...😭 )

Chris T. An
Robert, you can have a look to the Grand Models resin kits. I am much more disappointed that there is no kit in 1:72 and no 3D file of a PZL 106 Kruk. I would spend some money on that because it would fit perfect to the Dromader and Cmelák.

Robert Podkoński
Actually, that is something that makes me angry too - I would love to see (and buy) decent kits of "Wilga" and "Kruk" (not mentioning PZL M-15 "Belphegor" 😉 )... but apparently no Polish manufacturers are interested in preparing these.

Alex K
Guys... let's look a bit at the bright side: who would have thought a few years ago that one day (today!) there would be kits of the Cmelak, the Dromader, the Grumman AgCat (in both 1:72 & 1:48!!!), the Piper Pawnee?! Some are short-run, some are cast-resin, some are 3D-files-to print - nevertheless, something is slowly moving towards that direction! So, yes, I do hope too there will be someday a Kruk available in 1:72 or a Belphegor! And your buys of such kits and your modelling work proves that there's some interest in such topics! Keep it up! 👍

Robert Podkoński
You're right, Alex 🙂 "Always look on the bright side of life..." 😉

Robert Podkoński
I am afraid there is a spelling error on the decals, Chris... I see "Dromedar" instead of "Dromader"... The plane looks awesome!

Chris T. An
Robert, I can understand that it is confusing, but in the GDR, "Dromedar" was actually used. This is the German translation of the word. Feel free to search for pictures of it, here would be an example: [img1]

Robert Podkoński
I have not known about that, sorry Chris... That's really interesting.

Alex K
Nice trivia... and as Robert said: it looks awesome!

Bernhard Schrock
Dromader: An outstanding result from such a simple kit!

Neuling
Everything top notch here! But what about the excavator? May a combined diorama?

Chris T. An
The excavator is still coming. I haven't dared to go any further yet. Let's see, maybe I'll get motivated again in the fall/winter. 😉

Neuling
👍

Michael Kohl
Very well done Dromedar. Anxious about the excavator.

Villiers de Vos
Fantastic work on the crop duster.

Chris T. An
It is not easy to find out with which lettering the excavator was delivered in the color used in the respective year of construction. I'll have to see which decals I print out.

Ben M
What a great project! You got an amazing result with the 3d printed aircraft.

Mark Sherwood
That's excellent, I operate a CAT M3050 Material Handler at work, very similar. Weathering on the grabs are spot on. 🥸👍

Spanjaard
that is looking amazing, and it is not yet finished.....