ニュースフィード
Qwertzel新しいフォトアルバムを追加しました。
20 7 June, 15:25
JohnCool! I was wondering how all the extra parts in mine looked when done, very nice. 👍
If you will accept a bit of advice, when you complete the cabin "shell" that goes into the fuselage halves, be prepared to do a lot of trimming and fitting before closing up. On mine, the sides of the fuselage wanted to push the roof of the cabin down and also hit the edges of the windscreen opening and that left a big gap on top. I finally got it acceptable fit, but even then, I wish I had cut more away because the cabin roof does not quite fit flush.
20 June, 15:34
QwertzelThanks for the advice. I'll take care of it 🙂
I build a lot of Revell kits in the past and the fitting was different with every model. I have got everything between pretty good and horrible. It's always like a mysterious box.
20 June, 16:28
JohnI'm sure you will do well with all that Revell experience. 👍 The good news is that other than the cabin shell, the rest fits OK (ish) even the windscreens. But if you want doors closed, also be prepared to do some surgery on them.
20 June, 17:35
Andre LouisLooking good indeed! How did (or will) you paint the inside of the air intakes?
John is right with his comment, the cabine ceiling is a problem. I decided to keep the pilot door frames on the inside out for the moment. Without them the fitting seems to be quite good.
12 August, 20:01
QwertzelThanks Andre! I already painted the air intakes with my airbrush. Now I will mask everything off so the paint is save for the yellow.
13 August, 07:31
MiniArt 1:35
Juergen Klinglhuber新しいフォトアルバムを追加しました。
38 31 May, 15:38
Juergen KlinglhuberStarted this one.
The Ju 86 which were seen in 2 different Austrian markings, but at the end was never part of the Airforce. Here the overall silver Ju86 #311 at the airshow in Vienna-Aspern in early 1937.
2 June, 11:10
Juergen KlinglhuberThe mention aircraft was sent to the Airshow in Aspern as a "demonstrator" in austrian marking. Austria was interessed in buying 18 Ju86K-7. Due to several reasons Junkers was not prepared for that airshow and on short note removed the markings of an 86K-2 that was already prepared to be sold to Sweden. They put on austrian markings, a service number #311 and flew it over to Austria for just this one day. Flight captain Behrendt did a good job and the aerobatic air-display was a great success. So far so good. Why I am telling this? 86-K2 is a differend engine and cowling. The box is a 86E1/2. Aftermarket conversion products are out there (Kora) .....I had difficulties to locate/buy some.
Therefore: it is Scratchbuilding time again !!! 😎
5 June, 18:16
Juergen Klinglhuberthx Alec &Lukasz for you very kind support 👍 - appreciated.
But the first cuts are already done - no way back now 😉
(and I have to odmit: usually I like it to test my skills by a DIY task every now and then)
5 June, 18:51
Stefan FraundorferAh, a new and very interesting project. Of course I will follow that. Have fun with the Ju 86 Jürgen.
15 June, 07:23
Juergen KlinglhuberI have finished the modification on the engine resp. cowling. Some new pic's up-loaded.
23 June, 15:27
Roland SachsenhoferVery interesting and extremely promising! We talked about it in Ried, and now I'm delighted to see these ideas being realised in such an impressive way!
23 June, 15:30
TH SCALE MODELS (Thomas Haberl)Nice progress Jürgen! I´m in to see how this beauty comes together 👍
24 June, 14:07
Juergen KlinglhuberThank you mates for leaving your nice comments.Iam wWorking on the exhaust pipe currently. New picture up-date should be ready after this coming weekend.
3 July, 17:07
Juergen KlinglhuberAll mod's are completted now - after adding the windows of the cockpit I can move it to the paint hangar.
13 July, 20:27
Juergen KlinglhuberHey - thank you Roland for your feedback. That gives motivation of course 🙂
14 July, 16:01
Roland SachsenhoferThat's great, that's how it should be, because your construction progress here gives me inspiration 🙂
14 July, 17:20
Juergen KlinglhuberThank you Alec, Thomas & Cuajete. When I had finished I thought: "Grab, overdone. This bird was for sure not that worn as it went to the airshow more or less fresh from the manufacturer." But the more looked at it the more I was okay with the result. So your comments are welcome and soothe my concerns. 👍
9 August, 16:22
NicolasDon't worry Juergen, even on new airplanes there are sometimes clear visual differences in the sheet metal. For example, some manufacturers deburr the rivet holes with a grinding machine, the sheets are made of different alloys or are applied with different rolling directions, all of which have an influence on the appearance. I like it.
9 August, 19:16
LCこのアイテムが欲しい
"Saphir" system & laser range finder for T-54/55, BMP-1
Modell Trans Modellbau 1:72
MT72512 2021 新金型 マルチトピック (2)18 August, 12:19
Gary Curling新しいフォトアルバムを追加しました。
25 24 May, 15:39
Mr JamesAgree with Pietro, and Neuling is right about the log, it looks really bloody good. Also, its the first time Ive seen a T34 with the engine cover up. Did you scratch build that bit?
25 May, 11:22
Gary CurlingMany thanks for the kind comments Villiers de vos,Neuling,Pietro De Angelis and Mr James,this model has a interior and for the planed diorama is a t34/85 with engine problems with crew bailing out.The log is a real from a dead rosemary bush.
25 May, 11:36
DuperScaleMost Dio's have to much stuff on it, youre's how i like them. Perfect model in a realistic set up. Awesome
5 August, 17:12
Gary CurlingMany thanks for the kind words DuperScale,yes a lot of dio's do have to much stuff,making to much to take in.
17 August, 11:43
SJCherokeeこのアイテムが欲しい
Red Pig
Mercedes-Benz 300SEL 6.8 AMG Spa´71 #35 Schickentanz/Heyer ModellingMaster 1:24
MM-K-007 2022 2022 新金型 18 August, 12:15
/ja/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=ja
35
35
/ja/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo