ニュースフィード
Sy Bar
新しいフォトアルバムを追加しました。
新しいフォトアルバムを追加しました。
17 7 July, 21:41
Sy Bar
A builds of firsts, my first Helicopter and first use of 3D decals. Turns out the kit was originally a HobbyBoss kit and looks great nice details and combination of fine panel lines and rivets where need, I have high hopes for this build. 🤞
A builds of firsts, my first Helicopter and first use of 3D decals. Turns out the kit was originally a HobbyBoss kit and looks great nice details and combination of fine panel lines and rivets where need, I have high hopes for this build. 🤞
7 July, 21:47
Sy Bar
Cheers #Villiers, the 3d decals are fantastic and really elevate the tubs to a new level.
First real issue with the kit is the fit of the main body, it does not want to join easily and I can find a cause but most can be fixed by gluing a small section at a time and working down the body.
However the bottom section is far too narrow for the kit bottom part, creating large hangovers. This may suggest the bandy has a warp in it but this is modelling not assembly.
I've added a stretcher of sprue to force the side apart hopefully this will help and not cause more issues later.
Cheers #Villiers, the 3d decals are fantastic and really elevate the tubs to a new level.
First real issue with the kit is the fit of the main body, it does not want to join easily and I can find a cause but most can be fixed by gluing a small section at a time and working down the body.
However the bottom section is far too narrow for the kit bottom part, creating large hangovers. This may suggest the bandy has a warp in it but this is modelling not assembly.
I've added a stretcher of sprue to force the side apart hopefully this will help and not cause more issues later.
10 July, 08:48
Sy Bar
Another sort of issue although a little troublesome rather than true issue.
The instruction contain a couple of templates for both inner and outer glass masks (a great idea I wish more kits had). However they are way under scale, I resorted to old skool and used Tamiya tape and fresh blade with bright light behind (phone light 😁) and cut my own.
While right this it occurs to me they may be 1/72 scale and were not rescaled to 1/48 will check later.
Another sort of issue although a little troublesome rather than true issue.
The instruction contain a couple of templates for both inner and outer glass masks (a great idea I wish more kits had). However they are way under scale, I resorted to old skool and used Tamiya tape and fresh blade with bright light behind (phone light 😁) and cut my own.
While right this it occurs to me they may be 1/72 scale and were not rescaled to 1/48 will check later.
10 July, 20:06
Sy Bar
Great spot #Jens J it is indeed Special Hobby plastic, my apologies to both Special Hobby and HobbyBoss for the confusion.
Just completed a HobbyBoss and had them on my mind, this would be an excuse if the sprues where not so well labeled and on the Quinta 3D decals 🤪
Great spot #Jens J it is indeed Special Hobby plastic, my apologies to both Special Hobby and HobbyBoss for the confusion.
Just completed a HobbyBoss and had them on my mind, this would be an excuse if the sprues where not so well labeled and on the Quinta 3D decals 🤪
11 July, 06:29
Sy Bar
The decals have been interesting. The look great and are nice and thin. I normally apply a gloss coat then decals but reading/watching so much about how this is not necessary I tested this out on an un-required decal and it appeared to be true so I pressed on without a gloss coat. They went down fine however for the first time ever I got some silvering and I'm not sure if I did something to cause it or not. So I glossed coated them and the rear tail half then applied the remainder and not issue of silvering, guess I'll be continuing with a gloss coat 🙄
The hardest decal was the shark mouth very tricky but going slowly I just about made it
The decals have been interesting. The look great and are nice and thin. I normally apply a gloss coat then decals but reading/watching so much about how this is not necessary I tested this out on an un-required decal and it appeared to be true so I pressed on without a gloss coat. They went down fine however for the first time ever I got some silvering and I'm not sure if I did something to cause it or not. So I glossed coated them and the rear tail half then applied the remainder and not issue of silvering, guess I'll be continuing with a gloss coat 🙄
The hardest decal was the shark mouth very tricky but going slowly I just about made it
21 July, 17:09
Steve Schilbe
このアイテムの制作を始めた
このアイテムの制作を始めた
Sturmmörser Tiger RM61 L/5,4 / 38 cm (With Full Interior)
Rye Field Model (RFM) 1:35
RM-5012 2018 新金型 13 August, 22:19
Christoph Schnarr
新しいフォトアルバムを追加しました。
新しいフォトアルバムを追加しました。
11 1 July, 11:45
Christoph Schnarr
I spontaneously started building the new Morane 406 kit from Dora Wings. It was built oob. I only replaced the dashboard with coloured etched parts from AZ Model. The main reason for this was that the instrument layout for an MS.406 was far more correctly reproduced in the etched parts. In addition, the missing rows of rivets were added to the wings and fuselage.
I spontaneously started building the new Morane 406 kit from Dora Wings. It was built oob. I only replaced the dashboard with coloured etched parts from AZ Model. The main reason for this was that the instrument layout for an MS.406 was far more correctly reproduced in the etched parts. In addition, the missing rows of rivets were added to the wings and fuselage.
1 July, 11:47
Fotis Vrotsis
このアイテムが欲しい
このアイテムが欲しい
Heuschrecke IVb "Grasshopper" 10.5cm le.F.H. 18/6(Sf.) auf Geschüetzwagen III/IV
Dragon 1:35
6439 2007 新金型 13 August, 22:14
Tim Sloan
新しいフォトアルバムを追加しました。
新しいフォトアルバムを追加しました。
6 13 August, 19:24
Doubtingmango
Absolutely love it! 😍. Are those phase plasma rifles mounted on the nose?
Absolutely love it! 😍. Are those phase plasma rifles mounted on the nose?
13 August, 21:33
George Webster
このアイテムが欲しい
このアイテムが欲しい
Mercedes AMG GT3 Door & Engine Detail Kit for Tamiya 24345 & 24350 (Resin + PE + Metal Logo + Metal Parts)
Hobby Design 1:24
HD03-0548 20xx 新金型 13 August, 22:05
/ja/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=ja
35
35
/ja/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo