ニュースフィード
gorby
新しいフォトアルバムを追加しました。
新しいフォトアルバムを追加しました。
33 画像
Don’t get the hump - The Bedford DromedaryNew: 20 July, 14:54 1:76
I did conciser having a go at hand writing the 2mm high number on the side of the cab…. took me a while to stop laughing...
プロジェクト: Bedford Dromedary.
18 13 July, 13:59
gorby
New photos start at number 10.
This may give the impression that I've completed this in a couple of weeks...it's been nearer two months. Although the build is complete this update doesn't take us to the end of the build process.
Thanks for having a look. 🙂
New photos start at number 10.
This may give the impression that I've completed this in a couple of weeks...it's been nearer two months. Although the build is complete this update doesn't take us to the end of the build process.
Thanks for having a look. 🙂
16 July, 15:40
gorby
Thanks Alec. I've tried cast parts in resin before and it wasn't very successful, this time I used silicon as the mould and that made all the difference. It's really easy with silicon. 🙂
Thanks Alec. I've tried cast parts in resin before and it wasn't very successful, this time I used silicon as the mould and that made all the difference. It's really easy with silicon. 🙂
17 July, 07:06
bughunter
Holy moly - what a nice little model! Great work so far 👍 Sorry, I was not in the mood to follow all the nice builds here, so I discovered it lately.
And thank you very much for mention me in the album info 😉
Holy moly - what a nice little model! Great work so far 👍 Sorry, I was not in the mood to follow all the nice builds here, so I discovered it lately.
And thank you very much for mention me in the album info 😉
18 July, 06:52
gorby
No problem mate, I have times I'm not in the mood to comment, quite often really as I'm a grumpy old git. 😄
I hope to get the final photos posted at the weekend, it's finally stopped raining here so busy doing other jobs at the moment. 🙂
No problem mate, I have times I'm not in the mood to comment, quite often really as I'm a grumpy old git. 😄
I hope to get the final photos posted at the weekend, it's finally stopped raining here so busy doing other jobs at the moment. 🙂
18 July, 11:13
gorby
Finally got around to taking some photos of this ridiculous beast, thanks you all for following the build. 🙂
Finally got around to taking some photos of this ridiculous beast, thanks you all for following the build. 🙂
20 July, 14:57
gorby
Thanks David. 👍
Thanks Neuling, although you're mistaking me for a proper modeller if you expect a dio. 😄 😄
I have to be in the right mood to to do a dio and at the moment I just feel like building models. 🙂
Thanks David. 👍
Thanks Neuling, although you're mistaking me for a proper modeller if you expect a dio. 😄 😄
I have to be in the right mood to to do a dio and at the moment I just feel like building models. 🙂
21 July, 06:48
Christian Bruer
Wow, very impressive and excellent work with a lot of scratchbuilt parts - love it 👍
Wow, very impressive and excellent work with a lot of scratchbuilt parts - love it 👍
21 July, 13:54
gorby
Thanks very much Christian. Apparently the drivers didn't love them because they were sooooo slow. 🙂
Thanks very much Christian. Apparently the drivers didn't love them because they were sooooo slow. 🙂
21 July, 14:00
Christian Bruer
新しいフォトアルバムを追加しました。
新しいフォトアルバムを追加しました。
25 7 July, 19:36
Christian Bruer
When I got a photo showing a Pz. I towing a Ju-87, possibly on an airfield in North Africa, I definetely want to build that scenery. The Pz. I is a mix of parts from S-Model Pz. I Ausf. A and B, the Ju-87 is Italeri. I bought some Quickboost add on parts which are designed to fit the Airfix kit, but with slightly modifications they although fit quite well the Italeri kit.
Happy Modelling, Christian
When I got a photo showing a Pz. I towing a Ju-87, possibly on an airfield in North Africa, I definetely want to build that scenery. The Pz. I is a mix of parts from S-Model Pz. I Ausf. A and B, the Ju-87 is Italeri. I bought some Quickboost add on parts which are designed to fit the Airfix kit, but with slightly modifications they although fit quite well the Italeri kit.
Happy Modelling, Christian
7 July, 19:44
Alec K
I saw (likely) the same photo and also thought it would make a great dio. Glad it will materialize in your capable hands Christian 👍
I saw (likely) the same photo and also thought it would make a great dio. Glad it will materialize in your capable hands Christian 👍
9 July, 00:05
Christian Bruer
Still enough place in the first row, welcome aboard Łukasz and Christian 🙂
Still enough place in the first row, welcome aboard Łukasz and Christian 🙂
10 July, 19:13
Christian Bruer
Nearly there, just a few bits and pieces to add before I can start the paintwork.
I got the SSMODEL Pz.I tracks. So far as can be see still in their printing frame they are looking quite nice.
Happy Modelling
Christian
Nearly there, just a few bits and pieces to add before I can start the paintwork.
I got the SSMODEL Pz.I tracks. So far as can be see still in their printing frame they are looking quite nice.
Happy Modelling
Christian
21 July, 11:32
Tom B.
Looking neat so far! Where did you order those 3D parts from? Been curious about those for a while now...
Looking neat so far! Where did you order those 3D parts from? Been curious about those for a while now...
21 July, 11:34
Christian Bruer
Thank you Tom and Alec. SSMODEL only has a shop at AliExpress. I was a bit hesitant to order there, because there is a lot of rumor about piracy products over there. But once I did not found something similar I want to order from them I registered and ordered at AliExpress. Payment was easy via PayPal and delivery absolutely in time. I also ordered one of the SSMODEL vehicles, Marder III Sd.Kfz.139 SSMODEL 1:72 72725. The details are top notch, but the printing quality in between excellent and poor. The chassis, tracks and single parts are excellent, but the gun mount and gun shield are not so nice. The gun mount is warped and the gun shield has a lot of steps on the inner and outer side. It also differs from the instructions where gun mount and shield are shown as separate parts but it was delivered as a single part. That makes it even more complicated to solve the issues. But I think I will give it a try for another scale 1/72 kit in the future.
Here the link to the shop:
de.aliexpress.com/st..ain.2.72a2xoWPxoWPcN
Thank you Tom and Alec. SSMODEL only has a shop at AliExpress. I was a bit hesitant to order there, because there is a lot of rumor about piracy products over there. But once I did not found something similar I want to order from them I registered and ordered at AliExpress. Payment was easy via PayPal and delivery absolutely in time. I also ordered one of the SSMODEL vehicles, Marder III Sd.Kfz.139 SSMODEL 1:72 72725. The details are top notch, but the printing quality in between excellent and poor. The chassis, tracks and single parts are excellent, but the gun mount and gun shield are not so nice. The gun mount is warped and the gun shield has a lot of steps on the inner and outer side. It also differs from the instructions where gun mount and shield are shown as separate parts but it was delivered as a single part. That makes it even more complicated to solve the issues. But I think I will give it a try for another scale 1/72 kit in the future.
Here the link to the shop:
de.aliexpress.com/st..ain.2.72a2xoWPxoWPcN
21 July, 14:08
Bozzer
新しいフォトアルバムを追加しました。
新しいフォトアルバムを追加しました。
32 画像
Turnpiker, Box StockNew: 21 July, 14:01 1:25
There's gonna be some filler on this kit. Sink holes everywhere.
プロジェクト: 'Pete' Custom Cabover
2 28 April, 19:04
Bozzer
So, I started this, basically to keep my sanity. It's an old kit, and I won it on eBay, years ago. I love the look of the truck, so let's see what I can do with it?
So, I started this, basically to keep my sanity. It's an old kit, and I won it on eBay, years ago. I love the look of the truck, so let's see what I can do with it?
28 April, 19:13
Bozzer
This isn't the "Walk in the park" kit, that I thought it was, Martin. I've tried the hot water treatment, on the cab, with no effect. So, it's a ceramic tile on the radiator, and weight on the roof. Hopefully, tomorrow will see some better results?
This isn't the "Walk in the park" kit, that I thought it was, Martin. I've tried the hot water treatment, on the cab, with no effect. So, it's a ceramic tile on the radiator, and weight on the roof. Hopefully, tomorrow will see some better results?
28 April, 20:09
Nigel Chapman
My food dehydrator I use for drying painted items has a variable temp setting. Would anything like that help with the cab? I.e. a constant heat flow around the cab may soften it allowing it be reshaped.
My food dehydrator I use for drying painted items has a variable temp setting. Would anything like that help with the cab? I.e. a constant heat flow around the cab may soften it allowing it be reshaped.
28 April, 20:43
Bozzer
I like that idea, Nigel. I unfortunately, don't own a hairdryer, but I do have a heat gun. I don't particularly want to use it. As I type now, the tile and weight method, is underway. The heating and cooling of the radiator, should assist the process, but you've definitely given me a new train of thought.
Thankyou, my friend. The collective minds of the hive, strike again 👍
I like that idea, Nigel. I unfortunately, don't own a hairdryer, but I do have a heat gun. I don't particularly want to use it. As I type now, the tile and weight method, is underway. The heating and cooling of the radiator, should assist the process, but you've definitely given me a new train of thought.
Thankyou, my friend. The collective minds of the hive, strike again 👍
28 April, 20:50
Bozzer
Wow, I didn't realise how long it's been!
I've been tinkering on with this, along with many other projects, when time allows. I'll pick up on the pictures tomorrow.
Wow, I didn't realise how long it's been!
I've been tinkering on with this, along with many other projects, when time allows. I'll pick up on the pictures tomorrow.
20 July, 21:38
Bozzer
The saga of the cab warpage, didn't get any better. Even after 2 weeks on the radiator and a week outside in the sun, nothing happened. So I painted it and consoled myself, that once the clear parts were added, and the interior, that would stiffen things up and back in shape? Then suddenly, a cheap Peterbilt 352 kit, appeared on eBay. Three days later, it was in my hands. Cab was perfect, so black it went!
The saga of the cab warpage, didn't get any better. Even after 2 weeks on the radiator and a week outside in the sun, nothing happened. So I painted it and consoled myself, that once the clear parts were added, and the interior, that would stiffen things up and back in shape? Then suddenly, a cheap Peterbilt 352 kit, appeared on eBay. Three days later, it was in my hands. Cab was perfect, so black it went!
21 July, 12:42
/ja/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=ja
35
35
/ja/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo