ニュースフィード

Ben M
Very nice t-33

Mid Franconian
Thanks Ben!

Juergen Klinglhuber
Looks very good 👍

Mark Sherwood
Nice looking T-33 the RCAF Cami looks good too. Different from NMF.

Mid Franconian
Thanks Jürgen & Mark! My initial plan was once to make a German T-33. A late one, beginning of the 70s in camo with Dayglo markings. But those were equipped with special version of Martin Baker Mk. 2 seats which are not available in resin, at least to my knowledge. I did not want to scratch them so this project was stopped. But then I came across the idea of a Canadiaon CT-133. Everything looks cooler with a Maple Flag on it (to my opinion) so I ordered Mike Belcher´s superb decals and well - here is the result.

Mark Sherwood
Now that would have been summink' camo and dayglow.

Roland Sachsenhofer
These four pictures begin a project that should result in one of the largest models I have ever attempted. Not the biggest - the 1:32 Liberator holds my record here - but close!
However, the impressively large box contains surprisingly little and, also surprisingly, large components such as the fuselage, wings and tailplane are already assembled. Incidentally, these are made of fibreglass and require their own treatment.
These parts are also stable and clean. A bit of filling was required, as the traces of glue and filler on the seams are very rough and show air pockets. This will now be sanded, the cockpit sawn out and the windows drilled - well, modelling a little differently than usual! 🙂

Gergő Takács
This looks like a cool project! Following.

Treehugger
The panel lines look ok I guess. I mean, I would be happy with those panel lines.

Mr D
Like it , nice project.
I'm working on the Beriev Be-6 Armoured Flying boat,
Revisiting a kit after 33yrs.
All the best with yours...😃👍👍

Robert Podkoński
A true behemoth it is. I will surely follow this build with utmost interest!

gorby
Looking forward to seeing this take shape. 🙂
I believe the last Mars had it's final flight two weeks ago.
Youtube Video
Youtube Video

Nathan Dempsey
Oh my another giant. Following 👀

Robert Podkoński
BTW. Do we see the finished Fairchild in the background, Roland?

Roland Sachsenhofer
I am very happy about all your interest! In fact, I also started this project because of its topicality; the pictures of the last flight of Hawai Mars are always a heart-warming pleasure; this one in particular, thanks Gorby for posting it!

Today I drilled the openings for the windows in the fuselage; I determined the diameter of the holes from kit glass parts. They seem a bit big to me, but we'll see. As I'm not going to use the clear parts from the kit, but want to make them with Klearfix, I could reduce the diameter quite a bit.
The next steps will be to finish sanding the fuselage seams - now only the top side has to be done - and then to glue the wings and stabilisers to the fuselage. To do this, I'm cutting solid steel rods to length, which I'll glue in place with a two-component adhesive.
The Mars should be ready by mid-October: I want to take it to the Euromodel in Ried, Upper Austria.

And yes, In fact, the more or less finished Fairchild F.91 had to serve as a scale model in the background! 🙂

Thomas Mayer
Du bist echt eine Bau-Maschine, Roland! Und immer kommt etwas sehr schönes raus! 👍

Roland Sachsenhofer
Danke für die Einschätzung, Thomas! 🙂

Roland Sachsenhofer
The construction of Mars is progressing: I'll show you a few construction steps in a little 'time lapse'. Attaching the wings and tailplane with 2k glue worked well; the materials could be sanded smooth and fine afterwards. However, the brittleness of the fibreglass caused some difficulties; parts kept splintering off and had to be filled, sanded and re-engraved. As I always do the whole thing standing up, wearing a mask and under running water, this always turns into an almost athletic exercise 🙂 But now it seems to be over and the Mars is ready for its first encounter with colour... I took the two crew members under the cockpit canopy to make the proportions clear and to keep my options open for presenting the finished aircraft - who knows, maybe it will take off or fly?

gorby
It's a bit of a monster! 😮
Doesn't look like an easy build but you seem to be beating it into shape. 🙂

Robert Podkoński
You're the brave man, Roland, not me...

DerMattes
Das schau ich mir weiter an 🙂

Mr D
Looking good Roland 👌
Be a nice bird when she done, pilots look smart 👍👍

Cuajete
Wow... an unusual and gigant model... It seems like fiberglass is difficult to handle.
Great job so far, Roland!

Michael Kohl
Na, da hab ich doch auch nen Blick drauf

Roland Sachsenhofer
Thank you very much for your motivating feedback and your interest, mates!

Łukasz Gliński
I have to follow that behemoth 👍 I don't think I'll ever find enough space to build one myself 😄

Thomas Kolb
My goodness, your models are just getting bigger and bigger! I cannot wait to see it finished!

Finn
Looking interesting, I'm in

Ray Loch
Following as well. Just saw its retirement flyby and landing in Pat Bay, Its Huge.

Roland Sachsenhofer
Fortunately, the Martin Mars has reached the stage where the colouring and surface design will be the main thing; so far I've been 'plugging holes' again and again: the fibreglass surface proves to be quite brittle, damage is difficult to putty, and when re-engraving the lost panel lines it quickly happens that it cracks again under the carefully guided scalpel blade - and a new hole has already appeared. The new pictures show a few such construction sites, for example at the bow under the cockpit glazing or on the back of the fuselage between the wings.
But, all in all, in retrospect it's all half as bad, now I'm looking forward to the paintwork!

Thank you, mates, for your interest and feedback! Ray, I would have liked to have experienced that too!

Ben M
👀🤯

Cuajete
Roland, I was unaware of these problems with fiberglass and it is a shame that these kits are so expensive considering the quality of these materials. I think the worst is over. You can feel proud of the work done so far. The effort was worth it. Go on!

Roland Sachsenhofer
Those are encouraging responses, yes, Cuajete, I think so too. Thank you both for your interest and comments!

Mr D
How big is the model??
Is it cast in fiberglass because it's to big for injection molding??
Nice to see the update 😁👍👍
The vent in behind the cockpit done now.

Mirko Römer
That's what you call a project!👍

Nicolas
Cool project, following.

Roland Sachsenhofer
Thank you friends! The Mars as a 72 model measures 84.5cm in wingspan and has a length of 48.5cm: huge, but not so huge that it couldn't have been made into an injection moulded model. The B-24 Liberator from Hobby Boss in 1:32 that I built this spring, for example, was significantly larger and yet still injection moulded.

What is now proving to be a challenging issue is that the acrylic paint I used does not seem to want to adhere properly to some parts of the resin fuselage and wing panels, even though I have meticulously and accurately cleaned the surfaces. And another thing: after I sprayed a first coat of white paint on the fuselage today, something became apparent that hadn't appeared before: the resin surfaces are covered with small air pockets, i.e. holes.... 'Much enemy, much honour' as they say in German! 🙂

James C
Have decided on my next victim, so pulled this one out of the stash this morning and gave the parts a rinse to clean off the mold release agents etc. Hope to make a start on it in the next day or so once dried. Similar to the Panzer 1A that I built previously, but this one is slightly longer due to having an extra road wheel, as well as a modified rear engine deck and exhaust due to having a different engine. Haven't decided if it will be based in France or Greece yet, but definitely leaning towards the grey and brown camouflage per the box art.

Kesa Tiho
Man good luck, hope it turns out well

James C
Thanks 🙂

Robin (WhiteGlint)
Another 1/16 scale tank 👀
Count me in, James 👍

Sebastian Meyner
Great work so far James 👍 Following 👀

John Hughes
I'd recommend adding the superstructure from front to back as you can have alignment issues. You can get decals for the fire extinguisher, which are not in the kit.

James C
Thanks guys 🙂

Really enjoying the larger 1/16 scale, and finding them much easier on the eyes to assemble.

Thanks John and yeah, that's what I did with the "A" version I built previously.

James C
I got quite a bit more done today with both track runs mounted for a test fit. They worked out quite well in the end, being much better than the plastic links that come in the kit. Far easier to assemble as well as only took a couple of hours versus several days for the stock plastic parts. Adds a nice bit of weight to the model as well. Still need to adjust the tension a little to get them sagging properly but pretty happy with how they turned out. Started to loose the natural lighting so will leave the turret assembly and smaller detail parts for tomorrow.

James C
Finished off the assembly a little while ago. Just needs a little clean-up in a couple places before I tear it apart again to airbrush a coat of black primer on it. I'm hoping it will be a little warmer tomorrow which will help with drying times. Am also considering adding an extra link to both track runs as in hindsight the tracks look a little tight at present with 97 links.

Mr D
Really nice.
. like it 👍👍

James C
Thanks Mr D 🙂

James C
I finished it off late yesterday afternoon, and have just been waiting for some better lighting to take some shots of the completed build.
This one represents a Panzerkampfwagen I, Ausf. B as deployed during the invasion of Poland in September of 1939 in the early stages of the second world war.

Both of these large 1/16 scale Takom kits have been fantastic to build.
Probably the weakest part of the kits are with the tracks, which while nicely molded... the plastic pins are very fragile and snap quite easily.
You only get approx. 12 spares, and I only had 1 spare left when I built the "A" version.
As a replacement set of metal links were roughly the same price as those for a Tiger 2 in 1/35 scale, it was a no brainer to purchase a set for this build of the "B" version. Much more durable, quicker and easier to assemble by far, and also adds a nice bit of extra weight to the completed model.

Being a smaller subject (but still quite large models) these Panzer I kits come in at the lower end of the price range of 1/16 scale kits making them much more affordable. I was fortunate to score this B version at 50% off, so was pretty chuffed about that.

All up, very nice kits and definitely recommended 😉👍

A walkaround both inside and out of the Panzer I

Youtube Video

Youtube Video

Robin (WhiteGlint)
Wonderful job mate! 👍
This grey-brown camo looks great.

Neuling
Good small scale build! Question though: Are the Balkenkreuze really on their proper places?

George Williams
Nice model of one of my favourite sports cars.

Christian W
Mine too! Nicely built. Very nice paintjob and finishing. Beautiful.

Spence Wilson
Nicely done. Beautiful paint.

Neuling
Beautiful!

Ben M
Nice work!

Neuling
For sure!

Ben M
Nice weathering!

Neuling
Looks very good! More pictures and infos would be welcome!

Mojo DeVirus
Outstanding work !!!

Michael Schubert
Absolutely awesome 👌 works perfectly as a diorama!!

Robert Podkoński
Awesome!

Spanjaard
simply breathtaking!!

Rui S
Excellent 👍

Michael Jack
Thank you all, it was a great build and very challenging.

Treehugger
Very clever diorama work 🙂

Dominik Weitzer
absolut stunning model !

Neuling
A masterpiece.

J35J
Impressive work!👍🏻

Villiers de Vos
Very nice work on the cockpit.

Robert Podkoński
Taking a seat here 🙂

Lorraine Lin
Following, thank you for sharing.

Neuling
Excellent work.

Snake Plissken
I enjoy the motorized kits. Thanks for sharing.

alenik3
Hi.
Shipping to Italy costs 20 euro.
You can pay with paypal - berinbao777@hotmail.com

best Alex

alenik3
you can pay 100 euro for the goods with delivery and send your address.
please answer today, or I will go on vacation, and will be able to send only after 14.10.24

best regards Alex

puntapenna
Thanks a lot Alex, but it is too much for me. Have a good holiday! Piero