ニュースフィード
Jan Hoos
新しいフォトアルバムを追加しました。
新しいフォトアルバムを追加しました。
4 画像
Trumpeter U-boat1:48
When finished i mount it to the wall, just on the waterline, i think. But first i must finish it!
12 8 July, 14:08
CaptGPF
Holy cow! I didn't think it were even possible to make a sub kit that big! following!
Holy cow! I didn't think it were even possible to make a sub kit that big! following!
8 July, 14:22
Jan Hoos
Hahahahah no John, i will place it at the wall when finished. The wall is ready for it as you can see in the album
Hahahahah no John, i will place it at the wall when finished. The wall is ready for it as you can see in the album
17 July, 10:07
John
That will look cool up there, just make sure it's secure as it might give you a concussion if it falls on you!
That will look cool up there, just make sure it's secure as it might give you a concussion if it falls on you!
17 July, 14:41
gorby
新しいフォトアルバムを追加しました。
新しいフォトアルバムを追加しました。
13 13 July, 13:59
gorby
New photos start at number 10.
This may give the impression that I've completed this in a couple of weeks...it's been nearer two months. Although the build is complete this update doesn't take us to the end of the build process.
Thanks for having a look. 🙂
New photos start at number 10.
This may give the impression that I've completed this in a couple of weeks...it's been nearer two months. Although the build is complete this update doesn't take us to the end of the build process.
Thanks for having a look. 🙂
16 July, 15:40
gorby
Thanks Alec. I've tried cast parts in resin before and it wasn't very successful, this time I used silicon as the mould and that made all the difference. It's really easy with silicon. 🙂
Thanks Alec. I've tried cast parts in resin before and it wasn't very successful, this time I used silicon as the mould and that made all the difference. It's really easy with silicon. 🙂
17 July, 07:06
bughunter
Holy moly - what a nice little model! Great work so far 👍 Sorry, I was not in the mood to follow all the nice builds here, so I discovered it lately.
And thank you very much for mention me in the album info 😉
Holy moly - what a nice little model! Great work so far 👍 Sorry, I was not in the mood to follow all the nice builds here, so I discovered it lately.
And thank you very much for mention me in the album info 😉
18 July, 06:52
gorby
No problem mate, I have times I'm not in the mood to comment, quite often really as I'm a grumpy old git. 😄
I hope to get the final photos posted at the weekend, it's finally stopped raining here so busy doing other jobs at the moment. 🙂
No problem mate, I have times I'm not in the mood to comment, quite often really as I'm a grumpy old git. 😄
I hope to get the final photos posted at the weekend, it's finally stopped raining here so busy doing other jobs at the moment. 🙂
18 July, 11:13
Brian Hatak
このアイテムを所有しています
このアイテムを所有しています
USS FFG Oliver Hazard Perry Class Detail up set
Pontos Model 1:350
35019F1 18 July, 19:02
Nehpets977
このアイテムを所有しています
このアイテムを所有しています
BAe Hawk T.1A 100 Squadron Display Aircraft 1992-1994. 2 versions No 4 FTS 70th Anniversary 1921-1991 Abu Sueir Valley
Xtradecal 1:32
X32-037 18 July, 19:02
Tony G
新しいフォトアルバムを追加しました。
新しいフォトアルバムを追加しました。
24 5 July, 12:45
Tony G
Hi Giannis, no, used AK plastic putty to mask the sand lines and sprayed the green in between.
Hi Giannis, no, used AK plastic putty to mask the sand lines and sprayed the green in between.
15 July, 20:25
Brian Hatak
このアイテムを所有しています
このアイテムを所有しています
Antarctica Observation Ship
SOYA The Third Antarctica Observation Corps.Pontos Model 1:250
25001R1 2019 新金型 18 July, 19:02
Raphael Bernecole
新しいフォトアルバムを追加しました。
新しいフォトアルバムを追加しました。
77 19 December 2023, 08:05
Marius
Great progress, it will be a great model at the end. Is that the Aires resin cockpit set for the F-4F which you adapted?
Great progress, it will be a great model at the end. Is that the Aires resin cockpit set for the F-4F which you adapted?
18 April, 20:33
Raphael Bernecole
Thank you very much to everyone for your support and follow-up 🙂
@Marius : I had the SBS Models resin kit in stock for the Revell kit. This kit is well detailed but complicated to place in the Phantom. I recommend the Aires Kit, much superior in every way 😉
F-4 E/F Phantom - Cockpit Set (SBS Model 72004, 1:72)
Thank you very much to everyone for your support and follow-up 🙂
@Marius : I had the SBS Models resin kit in stock for the Revell kit. This kit is well detailed but complicated to place in the Phantom. I recommend the Aires Kit, much superior in every way 😉
F-4 E/F Phantom - Cockpit Set (SBS Model 72004, 1:72)
19 April, 07:06
Jesse11111
このアイテムが欲しい
このアイテムが欲しい
Star Trek
Deep Space Nine Clear Edition with U.S.S. Defiant NX-74205 and Cardassian Keldon-Class Cruiser AMT 1:3300
AMT1245 2021 新パーツ マルチトピック (3)18 July, 18:57
Trez Mackenzie
新しいフォトアルバムを追加しました。
新しいフォトアルバムを追加しました。
16 24 March, 07:49
Trez Mackenzie
Thanks! The Eduard kits build themselves if you know the tiny issues. But I should not have attempted an Eduard this early. It is too nice a kit to practice on after a long hiatus.
Thanks! The Eduard kits build themselves if you know the tiny issues. But I should not have attempted an Eduard this early. It is too nice a kit to practice on after a long hiatus.
17 July, 21:57
Audrius N
yep Eduard are great kits. however the new type decal is or at least for me was a challenge to remove that bloody top film...
yep Eduard are great kits. however the new type decal is or at least for me was a challenge to remove that bloody top film...
18 July, 06:55
Trez Mackenzie
Thanks Neuling! I'm still experimenting 😊
@Audrius a scalpel and tweezers are your friends
Thanks Neuling! I'm still experimenting 😊
@Audrius a scalpel and tweezers are your friends
18 July, 10:10
Audrius N
@Trez - on flat surface , yes not a big deal. However on uneven surface, like on top of rivets, air intakes etc. it caused me a pain. Almost complete roundels went off on my Spit MkV 🙁
@Trez - on flat surface , yes not a big deal. However on uneven surface, like on top of rivets, air intakes etc. it caused me a pain. Almost complete roundels went off on my Spit MkV 🙁
18 July, 12:13
Juskifo
新しいフォトアルバムを追加しました。
新しいフォトアルバムを追加しました。
14 17 July, 23:04
Vintagemodeler
lights shadows, weathering, tones its all a masterpiece, can i sak how did you degradated decals to look weathered???
lights shadows, weathering, tones its all a masterpiece, can i sak how did you degradated decals to look weathered???
18 July, 09:57
Juskifo
C'est sympa Merci
Les décalcomanies "mam modelling" uk(mauvaises qualités, surdimensioné et couleurs infidèles) ont été patinés avec la couleur de base fortement dilué
J'ai également utilisé les decals eduard sur les entrées d'air
C'est sympa Merci
Les décalcomanies "mam modelling" uk(mauvaises qualités, surdimensioné et couleurs infidèles) ont été patinés avec la couleur de base fortement dilué
J'ai également utilisé les decals eduard sur les entrées d'air
18 July, 12:28
pato05
新しいフォトアルバムを追加しました。
新しいフォトアルバムを追加しました。
24 画像
Mil Mi-2 Air Transport Europe OM-OIU - Work In Progress1:72
After very long time of pause in modeling, the interior is complete and painted.
19 4 July 2018, 07:48
pato05
Little progress. I added few more details to the interior. Next step will be surfacer and painting.
Little progress. I added few more details to the interior. Next step will be surfacer and painting.
13 July 2018, 07:55
Konrad
pato05 - you have decided do not open pilots doors? Why? Your work is amazing 🙂
pato05 - you have decided do not open pilots doors? Why? Your work is amazing 🙂
18 July 2018, 20:53
pato05
Kon_Bar - Thank you very much. I was thinking about cutting the pilots door, but then I decided not to and make my work a bit easier. The problem is, that the doors would be too thick and would look unrealistic (like heavy armoured door from a tank). Hobby Boss makes very clear parts, so I think the interior will be quite visible anyway. The back doors will be of course open 🙂
Kon_Bar - Thank you very much. I was thinking about cutting the pilots door, but then I decided not to and make my work a bit easier. The problem is, that the doors would be too thick and would look unrealistic (like heavy armoured door from a tank). Hobby Boss makes very clear parts, so I think the interior will be quite visible anyway. The back doors will be of course open 🙂
19 July 2018, 05:53
pato05
Many thanks. Olly - I don't use microscope - just a really fine and sharp brush. All painted with Vallejo paints on brush and finished with Light Grey and Medium Grey wash from Ammo Of Mig Jimenez.
Many thanks. Olly - I don't use microscope - just a really fine and sharp brush. All painted with Vallejo paints on brush and finished with Light Grey and Medium Grey wash from Ammo Of Mig Jimenez.
19 July 2018, 12:08
F-104
新しいフォトアルバムを追加しました。
新しいフォトアルバムを追加しました。
16 19 June, 12:58
/ja/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=ja
35
35
/ja/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo