ニュースフィード
Aleksei Bes
このアイテムが欲しい
このアイテムが欲しい
U.S. Navy Jet Fighter
F-4J "Aardvarks" (First Limited Special Edition) Fine Molds 1:72
FP43S (FNMFP43S) 2021 新パーツ 2 October, 05:29
Ludvík Kružík
新しいフォトアルバムを追加しました。
新しいフォトアルバムを追加しました。
47 画像
Mi-1M, model conversion by Special Hobby - WIPNew: 1 October, 16:52 1:48
I glued the air inlet for the engine and the rear cockpit wall into the fuselage. The cockpit floor is inserted into the...
プロジェクト: Mil Mi-1M Czech Air Force
37 15 August, 08:24
Ludvík Kružík
I still miss this small helicopter in my collection of flying machines used in Czechoslovakia. The time has come for me to rectify that. 😉
I still miss this small helicopter in my collection of flying machines used in Czechoslovakia. The time has come for me to rectify that. 😉
15 August, 09:26
Ludvík Kružík
Hello, Greg. I know there's a Mi-1M kit in 1/72nd scale. Unfortunately, only this and a rather old kit from Special Hobby exists in 1/48 scale. In addition, this kit is an older version of the Mi-1A, which is different from the upgraded version of the Mi-1M. It has a different nose shape, different cockpit glazing and other minor changes. And since I decided to build the upgraded version of the Mi-1M, I will not avoid modifications to the kit.
To give you a better idea of the extent of the modifications to the kit, I've included a picture with the differences between the Mi-1A and Mi-1M versions color coded.
Hello, Greg. I know there's a Mi-1M kit in 1/72nd scale. Unfortunately, only this and a rather old kit from Special Hobby exists in 1/48 scale. In addition, this kit is an older version of the Mi-1A, which is different from the upgraded version of the Mi-1M. It has a different nose shape, different cockpit glazing and other minor changes. And since I decided to build the upgraded version of the Mi-1M, I will not avoid modifications to the kit.
To give you a better idea of the extent of the modifications to the kit, I've included a picture with the differences between the Mi-1A and Mi-1M versions color coded.
16 August, 22:23
Greg Baker
Oh, neat! I didn't realize there were so many changes between the versions. This is going to look great!
Oh, neat! I didn't realize there were so many changes between the versions. This is going to look great!
17 August, 15:09
Ludvík Kružík
Greg, thank you for your support.
____________________
I started building the model by making new transparent parts.
Greg, thank you for your support.
____________________
I started building the model by making new transparent parts.
17 August, 22:31
Greg Baker
Yeah. Nice work on the heat-n-smash moulding for the clear parts. That can be tricky to do.
Yeah. Nice work on the heat-n-smash moulding for the clear parts. That can be tricky to do.
18 August, 16:15
Ludvík Kružík
@Alec K
I used to buy ABC magazine regularly as a kid and eagerly awaited each new issue 🙂. I assume your mention of ABC magazine refers to the occasional modeling tutorial section.
@gorby, @Greg Baker
It's not too difficult to make new transparent parts by stretching warmed transparent foil over a pre-made template. Preparing the template is the most work. Stretching the warmed foil onto the template is just a routine that anyone can do after a few attempts.
@Alec K
I used to buy ABC magazine regularly as a kid and eagerly awaited each new issue 🙂. I assume your mention of ABC magazine refers to the occasional modeling tutorial section.
@gorby, @Greg Baker
It's not too difficult to make new transparent parts by stretching warmed transparent foil over a pre-made template. Preparing the template is the most work. Stretching the warmed foil onto the template is just a routine that anyone can do after a few attempts.
18 August, 22:17
Ludvík Kružík
Hello, Robert! Good to see you here. You haven't missed much so far. Up to this point I've been more concerned with preparation than building the model.
Hello, Robert! Good to see you here. You haven't missed much so far. Up to this point I've been more concerned with preparation than building the model.
28 August, 20:59
Ludvík Kružík
I want to try to use the sandwich construction in the production of new glass parts for the coptics. So I made (using the same process as the transparent parts) parts out of white plastic sheeting. These parts will have holes cut out for the windows. The transparent part will then be inserted between these two parts. The white outer and inner parts will form the embossed framing of the transparent part.
I want to try to use the sandwich construction in the production of new glass parts for the coptics. So I made (using the same process as the transparent parts) parts out of white plastic sheeting. These parts will have holes cut out for the windows. The transparent part will then be inserted between these two parts. The white outer and inner parts will form the embossed framing of the transparent part.
28 August, 21:18
Ludvík Kružík
Welcome, Jennifer, we're glad to have you on board and thank you for your goodwill. 🙂
Welcome, Jennifer, we're glad to have you on board and thank you for your goodwill. 🙂
30 August, 09:46
Ludvík Kružík
I came back from vacation and it started to rain. Ideal conditions for modelling. 🙂
So I'm back and continuing to work on the model. I need to glue the finished nose to the glued fuselage so the cockpit overlay fits exactly. That determines the workflow. First I have to finish the nose and the inside of the fuselage and glue all the parts that need to be glued to the fuselage halves from the inside. After gluing the fuselage halves together, I would no longer be able to get to these parts (or only with great difficulty).
Photos of the work progress will be coming soon.
I came back from vacation and it started to rain. Ideal conditions for modelling. 🙂
So I'm back and continuing to work on the model. I need to glue the finished nose to the glued fuselage so the cockpit overlay fits exactly. That determines the workflow. First I have to finish the nose and the inside of the fuselage and glue all the parts that need to be glued to the fuselage halves from the inside. After gluing the fuselage halves together, I would no longer be able to get to these parts (or only with great difficulty).
Photos of the work progress will be coming soon.
13 September, 20:42
Alexander Grivonev
Oh some modeling for big boys, not glueing perfectly fitting parts together and throwing on some paint! Following 👍
Oh some modeling for big boys, not glueing perfectly fitting parts together and throwing on some paint! Following 👍
13 September, 22:53
Ludvík Kružík
I glued several parts to both halves of the fuselage. These parts are glued from the inside, so they have to be glued before the fuselage is closed.
I also started working on making new parts for the cockpit.
I glued several parts to both halves of the fuselage. These parts are glued from the inside, so they have to be glued before the fuselage is closed.
I also started working on making new parts for the cockpit.
14 September, 21:06
Landlubber Mike
Wow, this is incredible work Ludvik! Thank you for sharing your steps - I've learned a lot from your pictures and descriptions!
Wow, this is incredible work Ludvik! Thank you for sharing your steps - I've learned a lot from your pictures and descriptions!
14 September, 21:15
Ludvík Kružík
@Landlubber Mike
Mike, thank you for your interest. Welcome aboard!
I've had the idea for this rebuild in my head for a few years now. Mainly because I've been waiting to see if anyone would start making 1:48 scale Mi-1M kits. Unfortunately, to this day, no manufacturer has this kit in their lineup. So I decided not to wait any longer and start building a model from what I have available.
My rebuild is just beginning. Most of the work on the model is yet to be done. I'd also like to try some new techniques that came to mind while planning to build this model.
@Villiers
Thank you for the compliment. I appreciate it very much.
@Landlubber Mike
Mike, thank you for your interest. Welcome aboard!
I've had the idea for this rebuild in my head for a few years now. Mainly because I've been waiting to see if anyone would start making 1:48 scale Mi-1M kits. Unfortunately, to this day, no manufacturer has this kit in their lineup. So I decided not to wait any longer and start building a model from what I have available.
My rebuild is just beginning. Most of the work on the model is yet to be done. I'd also like to try some new techniques that came to mind while planning to build this model.
@Villiers
Thank you for the compliment. I appreciate it very much.
15 September, 09:15
Ludvík Kružík
I didn't have much time today, so I didn't make much progress on the build. But every little bit of progress counts. 😉
I didn't have much time today, so I didn't make much progress on the build. But every little bit of progress counts. 😉
15 September, 20:43
Bruce Huxtable
Wow! You don't shy away from challenges! Watchinh with admiration, and hoping to learn lots too. Hoping you are not amongst the floods? Stay safe!
Wow! You don't shy away from challenges! Watchinh with admiration, and hoping to learn lots too. Hoping you are not amongst the floods? Stay safe!
16 September, 12:29
Ludvík Kružík
J35J welcome! I hope you like it here.
Bruce, I like a challenge like that. I like to experiment and enjoy thinking of and then implementing ways to improve my model.
I appreciate your concern for my safety. I live in a town in the highlands that wasn't badly affected by the floods. Only the river that runs through our town has increased flow, but it hasn't spilled out of its bed. Moreover, our house is 80 metres above the river, so even if the river had spilled out of its bed, it would certainly not have reached our house.
J35J welcome! I hope you like it here.
Bruce, I like a challenge like that. I like to experiment and enjoy thinking of and then implementing ways to improve my model.
I appreciate your concern for my safety. I live in a town in the highlands that wasn't badly affected by the floods. Only the river that runs through our town has increased flow, but it hasn't spilled out of its bed. Moreover, our house is 80 metres above the river, so even if the river had spilled out of its bed, it would certainly not have reached our house.
17 September, 07:08
Bruce Huxtable
It sounds an idyllic location.....Opravdu, česka příroda je krasná....
It sounds an idyllic location.....Opravdu, česka příroda je krasná....
17 September, 13:03
Ludvík Kružík
Bruce, thank you for the compliment. I'm sure the nature is beautiful in England too. 😉
Bruce, thank you for the compliment. I'm sure the nature is beautiful in England too. 😉
18 September, 10:23
bughunter
Another big bunch of parts, not to mention some kit parts, come together to form one big model! Not to be missed!
I'm late, but I have an excuse. First I was on holiday, and then this stupid C-virus knocked me out.
Another big bunch of parts, not to mention some kit parts, come together to form one big model! Not to be missed!
I'm late, but I have an excuse. First I was on holiday, and then this stupid C-virus knocked me out.
18 September, 20:29
Ludvík Kružík
Alec, thank you for your support and your kind words.
Welcome, Frank. I hope you're okay, and I'm really glad you're one of my guests.
It's definitely not too late. I still have most of my work ahead of me. In fact, you could say I'm just getting started.
Alec, thank you for your support and your kind words.
Welcome, Frank. I hope you're okay, and I'm really glad you're one of my guests.
It's definitely not too late. I still have most of my work ahead of me. In fact, you could say I'm just getting started.
18 September, 21:20
TH SCALE MODELS (Thomas Haberl)
Uhhhhhh … this is going to be another good one from you! I'm in 👍
Uhhhhhh … this is going to be another good one from you! I'm in 👍
23 September, 04:58
Ludvík Kružík
I'm struggling with time rather than the model at the moment. At least I managed to draw a new dashboard. After printing it in scale (1/48) on photo paper I will use it instead of the kit part.
I'm struggling with time rather than the model at the moment. At least I managed to draw a new dashboard. After printing it in scale (1/48) on photo paper I will use it instead of the kit part.
23 September, 23:41
John
Another Ludvik conversion build with all the accuracy and attention to detail.we've come to expect. It's looking good, can't wait to see the final result! 👍
Another Ludvik conversion build with all the accuracy and attention to detail.we've come to expect. It's looking good, can't wait to see the final result! 👍
23 September, 23:42
Ludvík Kružík
Welcome, John. Please have a little patience. This project is quite demanding and I will need a lot of time to complete it.
Welcome, John. Please have a little patience. This project is quite demanding and I will need a lot of time to complete it.
23 September, 23:50
John
Ok, I aimed that to "I can wait to see the final result" (but I'm still eager) 😉
Ok, I aimed that to "I can wait to see the final result" (but I'm still eager) 😉
24 September, 02:03
Alec K
Wow, the dashboard looks amazing. I can only imagine how much time that took. Really interested how it looks completed 👍
Wow, the dashboard looks amazing. I can only imagine how much time that took. Really interested how it looks completed 👍
24 September, 14:09
Ludvík Kružík
Alec, I drew the dashboard in the evenings for 5 days (about 3 to 4 hours each day). Add to that additional time (about 5 hours) for test printing and subsequent corrections.
I am attaching a photo of a test black and white print of the dashboard after all the modifications are complete. I will print the dashboard for the model in color later.
Alec, I drew the dashboard in the evenings for 5 days (about 3 to 4 hours each day). Add to that additional time (about 5 hours) for test printing and subsequent corrections.
I am attaching a photo of a test black and white print of the dashboard after all the modifications are complete. I will print the dashboard for the model in color later.
24 September, 18:34
Ludvík Kružík
According to the photos I modified the fuselage where the main landing gear is attached to it.
According to the photos I modified the fuselage where the main landing gear is attached to it.
24 September, 20:00
Ludvík Kružík
Guy, Jakub and Robert thank you for your comments, it's a nice encouragement for further work.
After today, the hull is glued together. Now I'm adjusting the shape of the transparent cockpit cover.
Guy, Jakub and Robert thank you for your comments, it's a nice encouragement for further work.
After today, the hull is glued together. Now I'm adjusting the shape of the transparent cockpit cover.
25 September, 21:13
Ben M
I continue to enjoy seeing this one take shape. Quite the effort to convert it!
I continue to enjoy seeing this one take shape. Quite the effort to convert it!
25 September, 23:27
Ludvík Kružík
Villiers, the completion of the fuselage is only temporary at this time. It's only to modify the shape of the transparent cockpit cover.
Once the cockpit cover is the correct shape, I will take the fuselage nose down again to continue work on the cockpit interior.
Villiers, the completion of the fuselage is only temporary at this time. It's only to modify the shape of the transparent cockpit cover.
Once the cockpit cover is the correct shape, I will take the fuselage nose down again to continue work on the cockpit interior.
26 September, 10:36
Ricardo Reis
新しいフォトアルバムを追加しました。
新しいフォトアルバムを追加しました。
64 23 October 2023, 19:02
James C
Looking fantastic 👍
Oversized decals in 1/48 appears to be a common problem with Italeri aircraft kits in 1/48. Despite the printing quality (Cartograph) it appears that Italeri are incapable of accurately measuring them for fit before sending off to Cartograph for printing. I have encountered similar decal fit issues with their 1/48 F-14A, Mirage III, Mig 21, S-3 Viking etc. Given that most (if not all) of their kits released these days are reboxings of older tooled kits; having to replace the decals as well is just a no go for me and so I now avoid the brand completely.
Looking fantastic 👍
Oversized decals in 1/48 appears to be a common problem with Italeri aircraft kits in 1/48. Despite the printing quality (Cartograph) it appears that Italeri are incapable of accurately measuring them for fit before sending off to Cartograph for printing. I have encountered similar decal fit issues with their 1/48 F-14A, Mirage III, Mig 21, S-3 Viking etc. Given that most (if not all) of their kits released these days are reboxings of older tooled kits; having to replace the decals as well is just a no go for me and so I now avoid the brand completely.
19 July, 18:45
bughunter
As you may know I love wooden propellers by I must admit that your propellers looks fantastic 👍
As you may know I love wooden propellers by I must admit that your propellers looks fantastic 👍
19 July, 19:34
Ricardo Reis
@James, I was not aware of this issue; I only started noticing when I started to apply the first decals and looking at the reference photos - there are 2 or 3 photos of this specific aircraft; now it's to late to go back, but I am alert for the future; @bughunter, I love this typo or propeller, like the ones we can see in the A400M, they are very beautiful and elegant and powerful at the same time!
@James, I was not aware of this issue; I only started noticing when I started to apply the first decals and looking at the reference photos - there are 2 or 3 photos of this specific aircraft; now it's to late to go back, but I am alert for the future; @bughunter, I love this typo or propeller, like the ones we can see in the A400M, they are very beautiful and elegant and powerful at the same time!
20 July, 12:02
Ben M
I agree with the propeller lust. This kit is just the way I like it, nothing fits.
I agree with the propeller lust. This kit is just the way I like it, nothing fits.
11 September, 01:09
Ricardo Reis
It will go to my basement when ready... to join the other finished models in storage! 🙂
It will go to my basement when ready... to join the other finished models in storage! 🙂
27 September, 18:41
Ricardo Reis
And that's a wrap! Terrible modelling experience, very glad it's over; final photos can be found here: E-2C Hawkeye | Album by RReis (1:48)
And that's a wrap! Terrible modelling experience, very glad it's over; final photos can be found here: E-2C Hawkeye | Album by RReis (1:48)
1 October, 22:47
Przemyslaw Sroczynski
新しいフォトアルバムを追加しました。
新しいフォトアルバムを追加しました。
9 15 September, 19:49
Michael Kohl
Following. Still struggling with my Revell/Modeltrans/OKB Grigorov Merk. Also bought the EMP3D ball and chain armour but see that you used the balls only. Anxious to hear why. Where did you find the super fine chain? I didn't.
Following. Still struggling with my Revell/Modeltrans/OKB Grigorov Merk. Also bought the EMP3D ball and chain armour but see that you used the balls only. Anxious to hear why. Where did you find the super fine chain? I didn't.
1 October, 04:48
Shar Dipree
Following.
I had also thought about replicating the chainball armor with chains for my two Merkavas and tried but failed because the chains I found all seemed too big.
Following.
I had also thought about replicating the chainball armor with chains for my two Merkavas and tried but failed because the chains I found all seemed too big.
1 October, 06:28
Michael Kohl
I was elated when EMP3D released the ball and chain armour and I ordered it and it looks very good. So I am anxious to know why Pryzemyslav discarded it.
I was elated when EMP3D released the ball and chain armour and I ordered it and it looks very good. So I am anxious to know why Pryzemyslav discarded it.
1 October, 08:10
Przemyslaw Sroczynski
Thx mates.
When i've bought EMP3D i was very happy, because there are no in the trumpeter set.
But after installation it occured they hang to low and just break with little turret movement
After few trials to fix them, ideas to rebuild the turewt, i've decided to replace them
Found small chains (even smaller that i've used) on mojehobby.pl
Thx mates.
When i've bought EMP3D i was very happy, because there are no in the trumpeter set.
But after installation it occured they hang to low and just break with little turret movement
After few trials to fix them, ideas to rebuild the turewt, i've decided to replace them
Found small chains (even smaller that i've used) on mojehobby.pl
2 October, 04:56
/ja/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=ja
35
35
/ja/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo