ニュースフィード
Rona新しいフォトアルバムを追加しました。
41 26 December 2023, 19:44
Claudio Palacio Campoこのアイテムが欲しい
French Nieuport XVII Painting Masks set
Copper State Models (CSM) 1:32
A32-001 12 August, 20:44
Landlubber Mike新しいフォトアルバムを追加しました。
6 19 January, 17:40
Tom B.Cool to see some Vessels of the IJA´s "mini-navy" built 👍 There are definetly some interesting vessels among them. Looking forward to more!
Evil toungs might of course argue that the Imperial Japanese Army had ships for one reason only: to battle their eternal rival and foe... the Imperial Japanese Navy!
19 January, 19:09
Landlubber MikeThanks Tom! I also have the Five Star Shimane Maru and Kumano Maru IJA carrier kits. Five Star does a really nice job on these kits - minus the instructions - with their resin hulls and PE detail pieces. Interesting vessels and color schemes indeed!
And you're not kidding about the rivalry between the IJN and the IJA. I've read a few books on the Japanese side of the war and you'd think they were mortal enemies, and not supposed to be fighting on the same side!
19 January, 19:24
Landlubber MikeThanks for looking in Gorby! Yeah, they had a few ships that were converted
The Akitsu Maru was originally intended as a passenger liner until it was taken over by the Imperial Japanese Army before completion. Interesting thing about the Akitsu Maru is that it was designed to carry planes as an escort carrier as well as vehicles for the IJA as a Type C landing craft depot ship. The planes were carried on platforms above the wooden deck (and under the flight deck), while vehicles were carried in the hull that exited through doors that opened in the stern (you can see one of the four doors in the picture). The ship also could carry landing craft in the hull, where the well deck could be flooded so the landing craft could float out of the ship.
2 August, 16:02
Skyhiker新しいフォトアルバムを追加しました。
9 画像
Tic Tac UAP (Scratch build)
1:72
Primer down and ready for some paint!
プロジェクト: Tic Tac UAP
Scratchbuilt
11 31 July, 21:12
SkyhikerWelcome gents. I'm not sure if these are the guys with the probe or if they're the ones who steal cows. They definitely don't want to be taken to our leader.
2 August, 04:43
SkyhikerIt won't be much different that it is. the description of this thing is literally a pure white tic tac shaped object without markings. 40 to 46 feet long with two "L" shaped antenna underneath. No obvious forms or propulsion.
12 August, 20:43
Fabioこのアイテムを所有しています
Japanese Heads Vol.1 (Tanker Helmet) (Plastic model)
Chino Model 1:35
CM-123B 12 August, 20:43
Thomas Kolb新しいフォトアルバムを追加しました。
46 5 July, 07:59
Łukasz GlińskiMe 3, I have to see that! Still procrastinating mine 😄
Thomas, are you considering getting rid of the decal with my support perhaps? 😉
26 July, 20:14
Thomas KolbŁukasz, I am not going to use the provided decal sheet, so if you want it, just PM me with your address and I can post it.
26 July, 21:48
Thomas Kolb(And for everybody else with knowledge about the different versions of the Yak-12, yes, I am aware of the differences between the A-version in the kit and the R-version used by the Hungarian People's Army. But since I am not able to scratch build the entire wing and empennage structure, let's just call it artistic license.)
28 July, 11:08
Thomas KolbThank you very much, dear gentlemen for your attention and encouraging words!
31 July, 14:48
Bruce HuxtableAdmiring your skills, and learning from your problem-solving, Thomas. Transforming an A-Model kit adds to the challenges 😉
4 August, 15:36
Thomas KolbThank you Michael, Nicolas & Bruce for your interest and compliments! This kit is actually not quite as bad as some other Amodel kits I have built - the designers have created some pretty nifty solutions here! If anything, it is a bit unforgiving - make one small mistake and you can be sure that it will keep coming back to kick you.
5 August, 20:35
Bernhard PetheWunderbarer Modellbau. Ich hab das Modell auch noch liegen und genauso wollte ich es auch machen. Mal sehen, wenn ich groß bin. 😉
9 August, 16:24
Thomas KolbBernhard, danke schön! 🙂 Ja, es ist ein ziemlich kniffliges Modell, aber es macht großen Spaß, es zu bauen!
9 August, 17:17
NicolasYes Thomas, I don't think you get any easy builds from Amodel. But with some work you get a nice and rare model. I realy like your progress. 👍
9 August, 19:22
Thomas KolbBruce, Lukasz, Cuajete, Nicolas, thank you! Yes, Amodel is actually cool in that they take a chance to make models outside the ordinary. Who else would design a model kit of a strange and ugly little high-winged Soviet aircraft instead of another Stuka, Tomcat or a Spitfire?
10 August, 08:01
Thomas KolbRoland thank you mate! Cuajete, yes, this is the best gloss coat I have ever tried. It levels out to an absolute mirror shine (at least if it is applied to a perfectly smooth paint layer). This model ended up with a bit of orange peel effect at some places, so it is not absolutely perfect, but I can get away with it.
10 August, 18:54
Thomas KolbHereby I declare the project finished! Quite a fast progress for me, only three weeks from start to finish. It may not be the best model I have ever built - there are too many silly or clumsy mistakes here and there - but it was great fun! More photos will come!
12 August, 07:50
Łukasz GlińskiThat escalated quickly and nicely 👍
Where did you get the snow from in August? I know it's up north, but still... 😉
12 August, 08:13
Nathan Dempseyこのアイテムを所有しています
370 Gallon wing fuel tanks with pylons (type 1) for F-16 2 pcs, 3D Printed 
ResKit 1:48RSU48-0356 2024 新金型
ResKit 1:4812 August, 20:42
Claudio Palacio Campoこのアイテムが欲しい
Nieuport Seat with Harness
MasterCasters 1:32
MST32068 12 August, 20:41
Claudio Palacio Campoこのアイテムが欲しい
Nieuport 17 Cockpit Detail Set
MasterCasters 1:32
MST32060 12 August, 20:37
Dmwildeこのアイテムを完成させました
Mitsubishi G4M2E Type 1 Attack Bomber (Betty) Model 24 Tei w/MXY7 Ohka Model 11
Hasegawa 1:72
00550 (E20) 2004 新デカール マルチトピック (2)12 August, 20:37
Claudio Palacio Campoこのアイテムが欲しい
Nieuport 17 cockpit set
Lone Star Models 1:32
LSM 30404 12 August, 20:37
Zsolt Czegle新しいフォトアルバムを追加しました。
153 14 June 2023, 18:20
Zsolt CzegleThank you mates!
It's a fast project again for a Facebook Group build event Vörös Június ( Red June) between 12.6 and 12.7. The main rule: build a Soviet or Russian manufactured vehicle/pláne. So I decided to build this little excavator...
16 June 2023, 14:29
Zsolt CzegleThank you mates for your interest!
Meanwhile I attached some lead wires as "hydraulic tubes" there are still some pieces to glue and I can start with the most interesting part: the painting
18 June 2023, 21:48
Shar DipreeLooks extremely nice and full of details. I'm looking forward to the end result.
29 June 2023, 20:28
Zsolt CzegleThank you Shar. I hope I can paint it and do the base chipping today. 🙂
30 June 2023, 10:33
Zsolt CzegleThe little excavator got his colors. Now he is waiting to be chipped...
30 June 2023, 20:51
Michael KohlYeah, that's the way it is suppose to look. The only slight issue I have are the hydraulic hoses. They look a bit too kinky. Being made frome rubber I would expect them to have a smoother routing. Probably something that can still be fixed.
16 July 2023, 18:45
Zsolt CzegleThank you Michael for your remark. After checking the reference photos I realized that the hydraulic tubes are shorter than I made, so I'll replace them! Maybe I'll replace them with coper wire instead of lead wires so they won't be so kinky.
17 July 2023, 05:40
Michael KohlFor my D9 build I used silicone tubes. They route nicely but attract dust like anything. So copper wire would be my choice too.
17 July 2023, 10:03
Zsolt Czegle"Hydraulic tubes" are removed. 😉
I painted additional dirt and grime effects with oilpaints.
19 July 2023, 19:43
Edgars BizūnsAmazing work, love the weathering all around! Also very finely produced model kit, lot to clean up?
21 July 2023, 05:10
Zsolt CzegleThank you Edgars! It's still ca. 90% completed.
The kit 3D printed so the casted resin parts had some visible layering but not that bad, so I could remove them with some sanding. The casting qualiti is perfect, there was almost nothing to clean. Fitting the parts was also without any problems.
21 July 2023, 07:30
Zsolt CzegleThe building phase is done. Weathering process is also completed. Now I have to complete the base and the figure.
23 July 2023, 18:20
Simon NagorsnikOh Wow!!
It's always a pleasure watching your work!
Perfect paint job, outstanding as always 👏👏
27 July 2023, 14:17
gorbyCongratulations Zsolt. I assume that award means something a lot more impressive than 'OK level'. It's certainly a vast amount better than just 'OK'. 😉
6 September 2023, 17:02
bughunterAll the prices have a bigger volume than the model itself 😉
Congratulation for each and all of your medals! 👍
23 April, 10:49
Simon NagorsnikYou can't do much better than this - excellent performance!
Congratulations and here's to a successful next time!
24 April, 17:26
/ja/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=ja
35
35
/ja/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo