ニュースフィード
David H
新しいフォトアルバムを追加しました。
新しいフォトアルバムを追加しました。
8 画像
This is not all it's cracked up to be …New: 16 October, 19:23 1:48
Cracking across the tail decals. The gray smear is where I’d already started removing paint then though I really should ...
プロジェクト: Phantom FG1 “Colonial Navy “
9 15 October, 15:59
David H
This won't be in FAA colours as I don't have any more FAA decals for this era of phantom so it's going to have to RAF.
This won't be in FAA colours as I don't have any more FAA decals for this era of phantom so it's going to have to RAF.
15 October, 18:42
Mr D
Hi Dave pain in the but when something like this happens to paint..?
It's all a learning curve.
I snapped a canopy in two recently.
Don't let it put you off, Velejo paints are very reliable and don't let you down.
I purchase a basic colours set when l first set out and never looked back.
Good luck with sorting it out..👍👍
Hi Dave pain in the but when something like this happens to paint..?
It's all a learning curve.
I snapped a canopy in two recently.
Don't let it put you off, Velejo paints are very reliable and don't let you down.
I purchase a basic colours set when l first set out and never looked back.
Good luck with sorting it out..👍👍
15 October, 19:05
gorby
Shame about the crazing as the model was looking very good. Do you know if it was the paint or the top coat which cracked?
Shame about the crazing as the model was looking very good. Do you know if it was the paint or the top coat which cracked?
15 October, 19:58
David H
Mr D , nothing puts me off, as you say it's all a learning curve. Gorby, I "think" it was too heavy a paint coat,. I've stopped using pure acrylics. I now use Tamiya acrylics thinned 50/50 or more with cellulose thinners (and a mask) gives a super smooth finish and no primer needed to key
Mr D , nothing puts me off, as you say it's all a learning curve. Gorby, I "think" it was too heavy a paint coat,. I've stopped using pure acrylics. I now use Tamiya acrylics thinned 50/50 or more with cellulose thinners (and a mask) gives a super smooth finish and no primer needed to key
16 October, 10:48
gorby
I've not heard of Tamiya acrylics being thinned with cellulose before. Normally I use the Tamiya thinners and find that works very well.
I've not heard of Tamiya acrylics being thinned with cellulose before. Normally I use the Tamiya thinners and find that works very well.
16 October, 11:02
David H
If you thin with cellulose (and leave it for a few hours) it breaks the particles down and gives a ridiculously smooth finish as well as etching into the plastic.
If you thin with cellulose (and leave it for a few hours) it breaks the particles down and gives a ridiculously smooth finish as well as etching into the plastic.
16 October, 12:40
Mr D
Hi Dave 👋
It's bit to Harsh for modeling Cellulose.
Isopropanol alcohol or Tamiya thinner is better and safer.
Cracking can happen if X2 paint coats are drying at quite different times.
Hi Dave 👋
It's bit to Harsh for modeling Cellulose.
Isopropanol alcohol or Tamiya thinner is better and safer.
Cracking can happen if X2 paint coats are drying at quite different times.
16 October, 13:04
David H
Whatever works for you…with pure acrylics I've had issues with " lifting" ymmv. Just don't try it with anything other than Tamiya. Tamiya is NOT a proper acrylic . "Proper" ie water based acrylics just turn to jelly 😉
BTW the FAA phantom was done with Tamiya acrylics thinned with Tamiya thinners.
Whatever works for you…with pure acrylics I've had issues with " lifting" ymmv. Just don't try it with anything other than Tamiya. Tamiya is NOT a proper acrylic . "Proper" ie water based acrylics just turn to jelly 😉
BTW the FAA phantom was done with Tamiya acrylics thinned with Tamiya thinners.
16 October, 14:48
Patrick Hagelstein
Wow! That's quite the save. 👍🏼 Really nice repaint. 👍🏼 I like using lacquers like Mr. Color, MRP or SMS and occasionally thin Tamiya 'acrylics' with lacquer thinner as well. They spray fabulously and if I need to touch up anything I just come in with brushes and use water or acrylic thinner as to have the same color.
Wow! That's quite the save. 👍🏼 Really nice repaint. 👍🏼 I like using lacquers like Mr. Color, MRP or SMS and occasionally thin Tamiya 'acrylics' with lacquer thinner as well. They spray fabulously and if I need to touch up anything I just come in with brushes and use water or acrylic thinner as to have the same color.
16 October, 19:32
Mr D
Well done for pulling it back Dave, l like the new scheme..... Great aircraft 😃👍
Well done for pulling it back Dave, l like the new scheme..... Great aircraft 😃👍
16 October, 23:22
Gary Victory
Nice work David. I've done something similar on a Tamiya Spitfire because of the decals. Looking forward to seeing the finished result.
Nice work David. I've done something similar on a Tamiya Spitfire because of the decals. Looking forward to seeing the finished result.
17 October, 06:20
Andrea Brenco
新しいフォトアルバムを追加しました。
新しいフォトアルバムを追加しました。
66 3 May 2021, 15:37
Andrea Brenco
welcome S M, David and Daniel. Yes, it is very different from all other Gotha's bomber
welcome S M, David and Daniel. Yes, it is very different from all other Gotha's bomber
23 December 2021, 22:22
Simon Nagorsnik
The wood optic seems great and the interior is awesome i like all the details!
The wood optic seems great and the interior is awesome i like all the details!
23 December 2021, 22:25
Moreno Baruffini
Ciao Andrea, really an interesting job with Uniposca! Great!
Buon Natale, Merry Christmas, Frohe Weihnachten to everyone!
Ciao Andrea, really an interesting job with Uniposca! Great!
Buon Natale, Merry Christmas, Frohe Weihnachten to everyone!
26 December 2021, 10:45
Andrea Brenco
Thank you Bern!!! I am really happy you find it interesting!
To me it something that make me want to build more WWI lozenge camouflaged aircrafts!!!
Thank you Bern!!! I am really happy you find it interesting!
To me it something that make me want to build more WWI lozenge camouflaged aircrafts!!!
27 December 2021, 16:37
Andrea Brenco
I used with a flat and wide (4 mm.) plastic struts as a ruler, no mask
HTH
I used with a flat and wide (4 mm.) plastic struts as a ruler, no mask
HTH
28 December 2021, 01:11
Andrea Brenco
Thanks Alec, Robert and David! this thing is really enjoying me, I will take it to completion!!!!
Thanks Alec, Robert and David! this thing is really enjoying me, I will take it to completion!!!!
29 December 2021, 21:21
Robert Podkoński
For the moment she looks tenacious, like some steampunk creation 😉
For the moment she looks tenacious, like some steampunk creation 😉
31 December 2021, 16:36
Moreno Baruffini
I'm really impressed, great great work on this masterpiece!
See you next year Andrea! Happy New year to everyone!
I'm really impressed, great great work on this masterpiece!
See you next year Andrea! Happy New year to everyone!
31 December 2021, 17:31
Andrea Brenco
Bas, Moreno, David, Mark and Spanjaard thank you a lot! @ Robert: yes it is a very peculiar looking aircraft, like many other German projects of the time it reminds me of the "Wacky Races" contraptions!!!
Bas, Moreno, David, Mark and Spanjaard thank you a lot! @ Robert: yes it is a very peculiar looking aircraft, like many other German projects of the time it reminds me of the "Wacky Races" contraptions!!!
1 January 2022, 22:40
Robert Podkoński
Wow! I have been convinced that actually she is bigger, but this comparison with Tamiya paint jar gives a sense. And a lot of rigging I see there. Chapeau bas, Andrea!
Wow! I have been convinced that actually she is bigger, but this comparison with Tamiya paint jar gives a sense. And a lot of rigging I see there. Chapeau bas, Andrea!
3 January 2022, 07:29
Andrea Brenco
Thank you Dietmar and Robert! Infact it is quite smaller compared to the previous Gotha bomber...
Thank you Dietmar and Robert! Infact it is quite smaller compared to the previous Gotha bomber...
4 January 2022, 22:10
Moreno Baruffini
Congratulations Andrea, you realised another masterpiece! Super!
Congratulations Andrea, you realised another masterpiece! Super!
5 January 2022, 08:22
Andrea Brenco
Thanks to all guys, you really make me blush !!! I wasn't expecting such a positive reaction!!!
In the next days I will try to take some better pictures and post them as I said.
If you want to build a WWI model I absolutely suggest to buy some of the beautiful GasPatch Model products, they are a real pleasure for the eyes and are so easy to use that you will not regret and will forget of every other similar products in different medium.
Today I gave a thoroughly clean to the desk and regain the room I have progressively lost in the last couple of years... Now ready for new adventures...
Many thanks again to everybody
Thanks to all guys, you really make me blush !!! I wasn't expecting such a positive reaction!!!
In the next days I will try to take some better pictures and post them as I said.
If you want to build a WWI model I absolutely suggest to buy some of the beautiful GasPatch Model products, they are a real pleasure for the eyes and are so easy to use that you will not regret and will forget of every other similar products in different medium.
Today I gave a thoroughly clean to the desk and regain the room I have progressively lost in the last couple of years... Now ready for new adventures...
Many thanks again to everybody
5 January 2022, 22:27
Michael Kohl
Beautiful model of this unusual subject. The color combination looks very decent.
Beautiful model of this unusual subject. The color combination looks very decent.
6 January 2022, 11:09
Andrea Brenco
Thank you very much Rui Nelson and Michael for your appreciation!
Thank you very much Rui Nelson and Michael for your appreciation!
10 January 2022, 00:58
Andrea Brenco
Thanks David, I must admit that most of my builds are done trying to do that last B&W pic(s) looks more real as possible...
Thanks David, I must admit that most of my builds are done trying to do that last B&W pic(s) looks more real as possible...
10 January 2022, 21:46
Łukasz Gliński
Beautiful, I'm always full of respect for people rigging these WWI ragplanes 😉
Beautiful, I'm always full of respect for people rigging these WWI ragplanes 😉
11 January 2022, 09:57
Andrea Brenco
Thanks Pierre and Lukasz! In the past I was frightened by rigging too, but when I discovered elastic thread it is not a problem, just a bit boring sometimes... 🙂
Thanks Pierre and Lukasz! In the past I was frightened by rigging too, but when I discovered elastic thread it is not a problem, just a bit boring sometimes... 🙂
11 January 2022, 11:37
Paul Selti
このアイテムが欲しい
このアイテムが欲しい
MT-LB Multipurpose Armored Vehicle with anti-aircraft gun 23-2
Alex Miniatures 1:72
A154 2022* 新パーツ マルチトピック (2)17 October, 16:40
Gilles Steinmetz
このアイテムを所有しています
このアイテムを所有しています
Kawasaki Ki61-I Tei Type 3 Fighter Hien (Tony) '244th Flight Regiment No.62'
Hasegawa 1:48
09939 2011 新デカール 17 October, 16:39
/ja/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=ja
35
35
/ja/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo