ニュースフィード
Roland Sachsenhofer
新しいフォトアルバムを追加しました。
新しいフォトアルバムを追加しました。
20 15 September, 11:53
Roland Sachsenhofer
These pictures are the start of a model project that I had long shied away from with respect: the kit parts promised a lot of fun and a highly interesting aircraft as a result, but also a lot of 'toil and trouble'. On the other hand: the adventure simply beckons.... 🙂
Here you can see the parts in almost raw condition, I only started to detail a little with round and flat wire. The tricky question was how to treat the sensitive and already somewhat battered transparent part of the unusual cockpit glazing. I decided to cut off the two side parts, mask the inside and outside of the windows and only attach the central clear part at the very end. I like the pictures with the over-designed radial engine: what a power-to-weight ratio for these racing machines!
The last two pictures show the current state of construction and detailing.... Well, we'll see...
These pictures are the start of a model project that I had long shied away from with respect: the kit parts promised a lot of fun and a highly interesting aircraft as a result, but also a lot of 'toil and trouble'. On the other hand: the adventure simply beckons.... 🙂
Here you can see the parts in almost raw condition, I only started to detail a little with round and flat wire. The tricky question was how to treat the sensitive and already somewhat battered transparent part of the unusual cockpit glazing. I decided to cut off the two side parts, mask the inside and outside of the windows and only attach the central clear part at the very end. I like the pictures with the over-designed radial engine: what a power-to-weight ratio for these racing machines!
The last two pictures show the current state of construction and detailing.... Well, we'll see...
15 September, 12:00
Roland Sachsenhofer
There she is now - at least on her own two feet, even if the appearance with engine and mighty cowling - not to mention the upper wing - will change a lot. The construction steps up to this point were accompanied by a lot of sanding, but the accuracy of fit turned out to be surprisingly good.
There she is now - at least on her own two feet, even if the appearance with engine and mighty cowling - not to mention the upper wing - will change a lot. The construction steps up to this point were accompanied by a lot of sanding, but the accuracy of fit turned out to be surprisingly good.
20 September, 17:00
Skyhiker
Ok now that's one interesting plane. Certainly not a Laird a**. What a huge engine!
Ok now that's one interesting plane. Certainly not a Laird a**. What a huge engine!
20 September, 18:26
Roland Sachsenhofer
You're right!
A friend asked if I was building a flying washing machine - in fact, the empty mount for the huge motor still reminds me of it. All the more so now that everything is white: it went well with all the white that Martin Mars is currently applying and forms a good basis for the following 'lemon yellow'.
You're right!
A friend asked if I was building a flying washing machine - in fact, the empty mount for the huge motor still reminds me of it. All the more so now that everything is white: it went well with all the white that Martin Mars is currently applying and forms a good basis for the following 'lemon yellow'.
21 September, 16:48
Skyhiker
Looks a bit like a cement mixer to me, but I can see a washing machine in there.
Looks a bit like a cement mixer to me, but I can see a washing machine in there.
21 September, 22:27
Roland Sachsenhofer
Thank you Skyhiker, Cement mixer - I'm laughing my arse off, the Solution is obviously an inspiring sight: how apt!
It's probably time for the massive cowling with the mighty radial engine to go on the front end. One step towards this is the colour yellow, which will remain on the wings and tailplane. I would like to use Gunze's 'Emerald Green' for the fuselage colour.
Thank you Skyhiker, Cement mixer - I'm laughing my arse off, the Solution is obviously an inspiring sight: how apt!
It's probably time for the massive cowling with the mighty radial engine to go on the front end. One step towards this is the colour yellow, which will remain on the wings and tailplane. I would like to use Gunze's 'Emerald Green' for the fuselage colour.
22 September, 09:51
Roland Sachsenhofer
From this morning with freshly applied decals: everything seems to shimmer and shine appropriately - but it turned out that the decals are absolute 'self-destructors'. The ones you can see here on the model fortunately went reasonably well, but the large markings on the wings and fuselage were beyond repair: just crumbs. Now I'm looking for someone who might be able to make me some painting masks on a PC. Luckily I scanned the decal sheet beforehand.
From this morning with freshly applied decals: everything seems to shimmer and shine appropriately - but it turned out that the decals are absolute 'self-destructors'. The ones you can see here on the model fortunately went reasonably well, but the large markings on the wings and fuselage were beyond repair: just crumbs. Now I'm looking for someone who might be able to make me some painting masks on a PC. Luckily I scanned the decal sheet beforehand.
24 September, 06:31
Lex Jassies
I always enjoy the surprise you reveal to us. Often with a type of aircraft that I had never seen before. Please keep it up! 👍
I always enjoy the surprise you reveal to us. Often with a type of aircraft that I had never seen before. Please keep it up! 👍
24 September, 13:29
Ben M
Beautiful paintwork!
I don't know if this helps but I've sent scans of decals to stsdecals before and they were able to make replacements for the ones that shattered.
Beautiful paintwork!
I don't know if this helps but I've sent scans of decals to stsdecals before and they were able to make replacements for the ones that shattered.
24 September, 16:51
Roland Sachsenhofer
Hi mates, I'm sure you can imagine how motivating your reactions are - thank you very much! I'll try that, Ben, thanks for that too!
Hi mates, I'm sure you can imagine how motivating your reactions are - thank you very much! I'll try that, Ben, thanks for that too!
25 September, 13:14
Juergen Klinglhuber
Looking gorgeous !! let me know if you are succesful with stsdecals, I might have other contacts too.
Looking gorgeous !! let me know if you are succesful with stsdecals, I might have other contacts too.
28 September, 09:54
LUKAS Hrubes
このアイテムが欲しい
このアイテムが欲しい
"Vandy One" VX-9 "Vampires" F/A-18F Super Hornet BuNo 166673 U.S. Navy 2023
Syhart (Syh@rt) 1:48
48-146 2023 新金型 30 September, 17:00
LUKAS Hrubes
このアイテムが欲しい
このアイテムが欲しい
SJU-17 NACES Ejection seats for F/A-18E & F/A-18C Late (1 pc)
MINI CRAFT collection (MCC) 1:48
MCC4819 マルチトピック (1!!)30 September, 16:59
Phenix Outis
この商品を注文中にする
この商品を注文中にする
KAB-500S 500 kg Satellite guided Air Bomb Suitable for Soviet/ Russian aircraft MiG-29SMT, MiG-29K, MiG-35, Su-24M, Su-25T
Advanced Modeling 1:48
AMC 48077 2014 新金型 30 September, 16:59
Phenix Outis
この商品を注文中にする
この商品を注文中にする
KAB-1500L 1500 kg Laser-guided bomb Suitable for Soviet/ Russian aircraft MiG-27K, MiG-29SMT, MiG-29K, MiG-35, Su-24
Advanced Modeling 1:48
AMC 48071 2014 新金型 30 September, 16:57
Mirko Römer
新しいフォトアルバムを追加しました。
新しいフォトアルバムを追加しました。
27 23 November 2022, 19:57
Simon Nagorsnik
Oh yes, modifications are good and you have found a good source of inspiration there😁
Oh yes, modifications are good and you have found a good source of inspiration there😁
24 November 2022, 05:05
Łukasz Gliński
Once you posted pic #1, we are all waiting for that fancy tent to be included 😛
Once you posted pic #1, we are all waiting for that fancy tent to be included 😛
25 November 2022, 21:06
Mirko Römer
If Hobby Boss will release the announced Leopard 2A6 CAN, I might consider buidling such an umbrella! But for god's sake this will take much longer than Hobby Boss claims! 🙂
To be honest, I have only one picture of the Ozzy umbrella...
If Hobby Boss will release the announced Leopard 2A6 CAN, I might consider buidling such an umbrella! But for god's sake this will take much longer than Hobby Boss claims! 🙂
To be honest, I have only one picture of the Ozzy umbrella...
26 November 2022, 11:19
Łukasz Gliński
toadmanstankpictures..abrams_australia.htm
So now, you have at least few more 😛
PS. there seems to be a special stand for it too: ozarmour.com.au/stor..-umbrella-stand.html
toadmanstankpictures..abrams_australia.htm
So now, you have at least few more 😛
PS. there seems to be a special stand for it too: ozarmour.com.au/stor..-umbrella-stand.html
26 November 2022, 11:58
Mirko Römer
Black base colour, some lighted AK Australian green. Needs even more lightening... The installation of the tracks was quite fiddly but finally it looks much better than the oob ones.
Black base colour, some lighted AK Australian green. Needs even more lightening... The installation of the tracks was quite fiddly but finally it looks much better than the oob ones.
27 November 2022, 16:23
Mirko Römer
Decals arrived today, looking nice! Went back to black priming, didin't like the green yet and will start with black.
Decals arrived today, looking nice! Went back to black priming, didin't like the green yet and will start with black.
9 December 2022, 16:15
Phenix Outis
この商品を注文中にする
この商品を注文中にする
Matra Type 155 SNEB Rocket Launcher Pod (2 pcs)
CMK (Czech Master Kits) 1:48
4340 30 September, 16:57
Mirko Römer
新しいフォトアルバムを追加しました。
新しいフォトアルバムを追加しました。
35 26 May 2022, 21:20
Simon Nagorsnik
Nice weathering!
You portrayed the Stryker well👍
Will there be a dmall dio for this?
Ps: The OKB tires are worth their money, aren't they?!😄
Nice weathering!
You portrayed the Stryker well👍
Will there be a dmall dio for this?
Ps: The OKB tires are worth their money, aren't they?!😄
4 June 2022, 19:15
Mirko Römer
Thanks Simon, I'm working on it 😀The tires are pretty good, but needed some work to make them fit. Probably it might be easier on the Academy kit. The ones provided by Trumpeter looked quite small and thin.
Thanks Simon, I'm working on it 😀The tires are pretty good, but needed some work to make them fit. Probably it might be easier on the Academy kit. The ones provided by Trumpeter looked quite small and thin.
4 June 2022, 20:59
Mirko Römer
Done. Can be seen live at this weekend's exhibition at Wiesbaden/ Mainz-Kastel.
Done. Can be seen live at this weekend's exhibition at Wiesbaden/ Mainz-Kastel.
24 June 2022, 13:21
Simon Nagorsnik
You did a good job on this dio mate!
Like all the details you`ve added
Thumb up 👍
You did a good job on this dio mate!
Like all the details you`ve added
Thumb up 👍
24 June 2022, 13:25
Mirko Römer
Thanks Simon for your highly appreciated comment. Better pictures during the weekend, as everything is stored in boxes now.😀
Thanks Simon for your highly appreciated comment. Better pictures during the weekend, as everything is stored in boxes now.😀
24 June 2022, 17:26
Mirko Römer
Thanks mates!! And thanks to the awesomne crew of PMC Main-Kinzig for having a stunning exhibition this year!
Thanks mates!! And thanks to the awesomne crew of PMC Main-Kinzig for having a stunning exhibition this year!
29 September, 17:56
Phenix Outis
この商品を注文中にする
この商品を注文中にする
H-19 (S-55) A.L.A.T. & Armee de l'Air over Algeria & Indochina (4 schemes)
Berna Decals 1:48
BD 48-119 2016 新金型 30 September, 16:56
Salvatore Ferragina
新しいフォトアルバムを追加しました。
新しいフォトアルバムを追加しました。
1 30 September, 16:54
LUKAS Hrubes
このアイテムが欲しい
このアイテムが欲しい
Ground Equipment
Blackburn Buccaneer Tow Bars Two towbars - wheels up and down. Aircraft In Miniature Ltd 1:48
GE48083 2022 新金型 30 September, 16:54
/ja/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=ja
35
35
/ja/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo