ニュースフィード

Rando
Been cooking up this idea since I got the 1/72 RF-8. My original plan was to build the plane in the cover of the Osprey RF-8 book, flown by Lt Andre Coltrin over Vietnam. With a little help from a 1/72 version of the Furball MiG Master sheet, I will rearrange the nose and tail numbers to make BuNo 146871 as it flew in Vietnam during its 1966 cruise off the USS Oriskany.

I also found an Academy F-8E, which has decals for a VF-111 jet that flew on the same cruise, so decided I will build it as the RF-8's escort, which they often had during their photo runs. I also figured, why not build them together? They will be displayed in flight.

Oleg Bogolei
Nice idea and intersiting projeact. Also have two of them in a stash)

Freak
Great idea for a double build. Following!

Rando
Good to have you gents, looking to start this one soon! I like researching and adding reference photos, so I just added some in the meantime.

Urban Gardini
Now this seems like a build that I've to follow!

Rando
Welcome Urban, happy to have you! "It's only a model!"

Sergej I
Following 🙂 👍

Rando
Hi Sergej! I'm very very excited to get started on this one

Casey Beckett
Following - got 3 of those nice new Sword RF's in the stash.

Jos Jansen
Normally I don't follow 1:72 scale models...for this one I'll make an exception...😅😉, grab myself a seat here! Love those Crusaders...

Patrick Hagelstein
Got intrigued by Rando's comment on Jos' build, so I popped over here. Looks like a very interesting build as well!

Rando
Happy to have you gents here, I'll be getting to this one just as soon as my elaborate P-51 build is done...

Rando
Here we go, double Crusader build. Gonna be comparing the short-run Sword RF-8 with Academy's F-8, which has been the go-to in 1/72. I have extra Academy kits so I'm swapping out the RF-8 kit's nice resin seat, I'll use it for a future open canopy build. The pilots will be obscuring seat detail in a closed canopy anyway.

David Fuller
Following

Rando
Welcome David!

I assembled the PJ pilots and started nipping off parts to assemble the fuselage. Getting the pilots to fit in their seats is tricky so far. Fit on the Academy kit parts is pretty nice. Sword kit is not as easy since there's no locator pins but they align well

Rando
Pilots are fully painted now. The F-8E pilot is based on Dick Schaffert, who was a pilot on this 1966 cruise. While I don't know of any specific plane he flew, F-8 pilots often flew jets that were assigned to others, so he's flying 149180 on this escort mission. In order to accommodate them, I had to remove the rudder pedals and front of the cockpit tub on the F-8E. It won't really be visible when the cockpit is buttoned up anyway.

Rando
I didn't like how the Sundowner helmet turned out so I stripped the paint and airbrushed it this time with tiny wedges of tape, then shaped and touched up everything. Just need to add a black stripe for the visor groove.

J35J
Great attention to details Rando! Following👍🏻

Rando
Thanks and glad to have you J35J! Pilots, seats, ejection handles, and joysticks are all in place. Time soon to start putting the jets together.

Rando
All the interior parts are in, soon time to put the fuselages together 👍

Guy Rump
Looking good, following. 👍

Rando
Hello Guy, welcome 😊

Fuselages are together. Now getting all the panels and gear bay doors to sit flush.

Calvin Gifford
Very nice! How is the Sword kit so far??

Rando
Thanks Calvin! It's quite nice if you remember it's a short run kit and you prep and test fit parts a lot before gluing anything. Has been a far from perfect first effort by me but I like how it goes together. It's shape is pretty accurate too. The Academy kit is very plug-n-play in comparison

Calvin Gifford
👍

S M
Double build! Following!

Rando
Welcome S M! I have been painstakingly installing the gear doors closed. Stuffing blutack in the wheel wells helps with frustration. Both F-8s have tiny aft gear doors on the main bays that took a lot of time to line up. The RF-8's nose doors were also very tricky. Happy to say I'm done getting the gear doors on.

Casey Beckett
Backup RF-8 inbound Rando ! Shipped Friday!

Rando
You the man Casey! Did some scratchbuilding tonight

Casey Beckett
Me too - Bonanza gear struts. God bless Albion Alloys. Great stuff if you've not used any of their items.

Rando
I have not but am always looking to add new things in this hobby, I'll check them out! I actually have an old Minicraft 1/48 Bonanza that I might do something with one of these days.

Rando
Took a big long tour on the clear parts struggle bus this past week. Got glue smudges on a camera window, the windscreen, and canopy on the RF-8, which all had to be buffed out. Hopefully I get the canopies attached snug without issues tomorrow night. Finding that carefully lining the attachment point with Revell Contacta on a toothpick is less risky than TET.

Calvin Gifford
👍

S M
Clear parts look good 👍

Michael Kohl
Like the planes. Like to see them in flighr. Like the effort you put in.
Feel you when putting pilots properly in and closing wheel well doors.
Anxious for the paint job.

Rando
Thanks all, getting closer to painting. A ton of work has gone into smooth out and scribe the lines around the gear bays on both jets, not to mention persistent seams. Also turned my attention to sanding down and rescribing the fictitious bumps on the folding joints, which the RF-8 has as well. The RF-8 also has wedge-shaped plates on the droops, which were only present much later, so those were sanded down as well. There's still a few things I want to try to perfect before I begin painting. I also have to decide if I want to paint the wings separately, in all likelihood I'm going to glue them on first because I want the fuselage section to be flush.

Rando
Alright, wings are on. I feel like this will make masking more complicated, but better for making sure they conform to the fuselage. I am so ready to paint these jets

Calvin Gifford
Whoot!

Nicolas
I missed this one, following. I love these side by side builds.
Great progress so far. 👍

Rando
Hi friends three months later I'm finally painting the damn things. Here's my current take on preshading, blackbasing, what have you. Gave the white areas a white base that I preshaded with dark gull grey. Then mottled the black with white for some variation with the light gull grey. Elsewhere I built the missiles, launch rails, and painting the horizontal stabs.

Thomas Kolb
Coming along nicely! Your blackbasing tedhnique looks very effective, I am curious how they will turn out!

Rando
I've painted the undersides of the CVW-16 birds. Unfortunately I did something stupid, something I even decided against at first--I tried doing a "pour" into the intakes to get them painted. This was a bad idea for the RF-8 in particular. I thought that since they were glued together I could get away with no leaks, but I saw the paint level draining, and I knew the paint would appear inside the camera windows. Lo and behold I saw paint when I peeked under the masks.

Feels horrible that I did this, even if I have some ways I could fix them. I can pop the side windows out and clean the bottom side windows, but putting them back in will be a pain since the side windows are meant to be attached from the inside. UGH. Any clever ideas to fix this mess are welcome, this is definitely one of those "mojo killers."

Rando
Think I fixed the windows. The bottom windows will still be a little smudgy. But I was able to get the sides back in by gluing a toothpick to the mask and rotating it from the inside, then seating it on the frame.

Calvin Gifford
Glad you figured it out!

Alec K
Following 👍

Guy Rump
Following. 👍

Bruce Huxtable
Neat work with the tiny decals for the instrument dials. 🙂

Miguel Vaquero
Beautiful cockpit!

Thomas Kolb
Beautiful start! Those dials are amazingly well done!

Nagy-Meszler Csaba
Thank you guys! I will try to imitate the rivets in the next few days.

Nagy-Meszler Csaba
Unfortunately the model has suffered unrepaired damage and will not be completed. 😥 Maybe I will buy the kit again later.

Gergő Takács
Oh no! 😥 After such a good start. What happend?

Miguel Vaquero
Sorry to hear that mate. Terrible when that happens 😞😞

Thomas Kolb
Oh, I am so sorry, it looked absolutely superb! 🙁 But I know, these things happen from time to time, one bad move and it all goes down the drain.

Doubtingmango
Watching

Mr D
Thanks, Appreciate the interest, lm reality new to the hobby about 14 months, finding my way with techniques.
Weathering n panel lines need more learning.
The IAR-80 was decent price from HB and liked the paint scheme...bit different
👍👍

J35J
I'm in!

Mr D
Thanks J35.
Nice to have the interest, HB instructions bit weak!
They said to paint interior charcoal black like on the FW-190.
But l checked n the Romanian lAR interior was grey/blue.
Engine building next 6 parts deal.
Cheers 😃👍