ニュースフィード
![](/profiles/img/28845-385-s.jpg)
Q: Is there any convenient way of scratchbuilding railings along the side of the ship, for 1:350 ships?
I had this idea, but don't have the tools for it. Basically using metal rods, then clamping hard on 3-4 places to flatten spots on the rod, then drill holes in those flat spots, then pull a wire through the holes later. But chances are I think the whole rod will bend every which way when clamping hard on some spots to flatten the rod in places. I suppose working with styrene rods might be simpler, but then, when drilling holes in the flat parts, the styrene will likely snap or melt if ever coming in contact with liquid glue.
One other idea I had, was to maybe try scrape the photo etch railings, to try round the otherwise "square looking" horizontal parts, making them look thinner than the "rods" standing upright, making them look more like maybe some wire than welded metal pieces.
I have seen Tamiya having some aftermarket product for the rods, with metal wire, but only for the Japanese Yamato ship, which doesn't look like most other ships I would think.
I had this idea, but don't have the tools for it. Basically using metal rods, then clamping hard on 3-4 places to flatten spots on the rod, then drill holes in those flat spots, then pull a wire through the holes later. But chances are I think the whole rod will bend every which way when clamping hard on some spots to flatten the rod in places. I suppose working with styrene rods might be simpler, but then, when drilling holes in the flat parts, the styrene will likely snap or melt if ever coming in contact with liquid glue.
One other idea I had, was to maybe try scrape the photo etch railings, to try round the otherwise "square looking" horizontal parts, making them look thinner than the "rods" standing upright, making them look more like maybe some wire than welded metal pieces.
I have seen Tamiya having some aftermarket product for the rods, with metal wire, but only for the Japanese Yamato ship, which doesn't look like most other ships I would think.
24 August, 09:09
![](/profiles/img/28909-839-s.png)
Wow. The vertical rods are about 3-5cm diameter in real life. That equates to 1-1,5mm in scale. The ropes are 1cm in real life? So you'd need 0.03 wire? The maths is from the top of my head, so I could be wrong of course.
I wish you the best of luck in pulling that off. And I call shotgun on the build!
24 August, 09:19
![](/profiles/img/28845-385-s.jpg)
I have some 0.1 mm metal wire. 🙂
Hmmm, maybe I could try combine that with some styrene rods, but square ones.
Hmm, 0,2 mm styrene rod might work.
Not having a precision drill mounted vertically with a wheel/lever will not be fun though.
Admittedly trying to straighten out a metal wire that's been on a roll, will be a pain, or at least have to be pulled out tight adding press/tension in the parts.
24 August, 13:49
![](/profiles/img/28845-385-s.jpg)
Oh, this was easy. Though, styrene rods are flimsy if accidentally knocking your hand into them, if finishing a model with styrene rods as railings.
The 0.2 mm drill bit is VERY weak, the 0.3 mm drill bit is much sturdier(!) There are no 0.1 mm drill bit in this UStar (UA-260 drill bit set 0.2 to 1.5 mm).
Hm.. I think a better idea, is to just use thin thread, maybe easier to handle and it will relax more nicely instead of potentially causing a stiff bend along the side of the ship if the vertical rods are a little unsymmetrical along the hull, if using the stiff brass wire even if just 0.1 mm thick.
[img1]
The wonky brass wire is the very start of the brass wire on the roller, presumably the rest of the wire is all smooth.
25 August, 12:01
![](/profiles/img/10518-177-s.jpg)
No instructions provided. Two pieces of vac for the two part canopy, Interior of the front fuselage looks nice, but no yoke nor seats provided. Parts show more or less print lines, Rather bad shown on the tail and rudder. I am doing some tests how to get rid of those,,,
25 August, 14:38
![](/profiles/img/43210-278-s.jpg)
I've had ok luck getting rid of or at least reducing print lines by brushing on water-diluted perfect plastic putty, which then tends to settle in the grooves and then sanding.
25 August, 15:21
![](/profiles/img/user-s.jpg)
新しいフォトアルバムを追加しました。
42 7 July, 16:05
![](/profiles/img/128829-863-s.jpg)
Splendid detail on the G.I.'s👌
Also great weathering touches, like the grease on the transmission, the fuel spills and subtle wear and tear on the hull.
8 August, 06:41
![](/profiles/img/136462-358-s.jpg)
Absolutely superb, the detail and work that you've out in is a real credit to you 👏👏
8 August, 06:50
![](/profiles/img/10792-966-s.jpg)
新しいフォトアルバムを追加しました。
56 7 July, 19:36
![](/profiles/img/10792-966-s.jpg)
When I got a photo showing a Pz. I towing a Ju-87, possibly on an airfield in North Africa, I definetely want to build that scenery. The Pz. I is a mix of parts from S-Model Pz. I Ausf. A and B, the Ju-87 is Italeri. I bought some Quickboost add on parts which are designed to fit the Airfix kit, but with slightly modifications they although fit quite well the Italeri kit.
Happy Modelling, Christian
7 July, 19:44
![](/profiles/img/23938-707-s.jpg)
I saw (likely) the same photo and also thought it would make a great dio. Glad it will materialize in your capable hands Christian 👍
9 July, 00:05
![](/profiles/img/10792-966-s.jpg)
Still enough place in the first row, welcome aboard Łukasz and Christian 🙂
10 July, 19:13
![](/profiles/img/10792-966-s.jpg)
Nearly there, just a few bits and pieces to add before I can start the paintwork.
I got the SSMODEL Pz.I tracks. So far as can be see still in their printing frame they are looking quite nice.
Happy Modelling
Christian
21 July, 11:32
![](/profiles/img/33587-335-s.png)
Looking neat so far! Where did you order those 3D parts from? Been curious about those for a while now...
21 July, 11:34
![](/profiles/img/10792-966-s.jpg)
Thank you Tom and Alec. SSMODEL only has a shop at AliExpress. I was a bit hesitant to order there, because there is a lot of rumor about piracy products over there. But once I did not found something similar I want to order from them I registered and ordered at AliExpress. Payment was easy via PayPal and delivery absolutely in time. I also ordered one of the SSMODEL vehicles, Marder III Sd.Kfz.139 SSMODEL 1:72 72725. The details are top notch, but the printing quality in between excellent and poor. The chassis, tracks and single parts are excellent, but the gun mount and gun shield are not so nice. The gun mount is warped and the gun shield has a lot of steps on the inner and outer side. It also differs from the instructions where gun mount and shield are shown as separate parts but it was delivered as a single part. That makes it even more complicated to solve the issues. But I think I will give it a try for another scale 1/72 kit in the future.
Here the link to the shop:
de.aliexpress.com/st..ain.2.72a2xoWPxoWPcN
21 July, 14:08
![](/profiles/img/33587-335-s.png)
Thanks for the reply, Christian 👍 It seems that their shop is one of the reliable outlets, then...nice!
22 July, 12:40
![](/profiles/img/76342-836-s.jpg)
It turns out very well, Christian. 👌 Looking with interest for the final result.
25 July, 07:07
![](/profiles/img/10792-966-s.jpg)
Thank you all for your kind feedback 🙂
Meanwhile I have added a few more details like the steering gear and tilger for the flaps. I also painted and reworked the SSMODEL tracks. They need a slightly adjustment to fit well the the S-Model Pz.I. MOre photos sooon when I start the paintwork.
Happy Modelling, Christian
26 July, 20:50
![](/profiles/img/10792-966-s.jpg)
WIP painting the Ju-87. Underside in RLM65 Hellblau is done as well as RLM70 Schwarzgrün. Depicting the references I have, the paint seems to have a weathered look, which I took in consideration by highlighting the basic paint.
Next will be the camo with RLM71 Dunkelgrün and a white band on the rear of the fuselage.
Happy Modelling
Christian
14 August, 18:25
![](/profiles/img/10792-966-s.jpg)
Thank you Christian and Moreno🙂
WIP on my Ju-87 scenery. I rrplaced the First to Fight Pz.I by the one from S-Model but replaced the tracks by 3D printed ones from SSMODEL.
That will come together nicely with a nice contrast in between all of the colours, sand brown Pz.I and the Ju-87 with a standard camouflage in green.
Happy Modelling
Christian
15 August, 18:23
![](/profiles/img/10792-966-s.jpg)
Thank you Lukas 🙂
There is a lot of masking needed to paint the Ju's splinter camouflage.
I did not masked and sprayed it in one loop, but step by step. For me it works much better in that way.
Only the rear fuselage and tail end is missing. So I have a plan for tomorrow 😁
Happy Modelling
Christian
17 August, 19:06
![](/profiles/img/10792-966-s.jpg)
WIP on my Ju-87, white band and blackgray walkways are masked and painted. Next weathering, varnish and decals.
A wooden base is also on the way, so I hope to finish this one and several other ongoing projects until SMC🙂
Happy Modelling
Christian
25 August, 11:26
/ja/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=ja
35
35
/ja/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo