ニュースフィード
![](/profiles/img/21997-347-s.jpg)
新しいフォトアルバムを追加しました。
57 4 August, 14:43
![](/profiles/img/21997-347-s.jpg)
The weather was ok today to try some outdoor pictures of the finished Pfalz D.III.
The pictures were taken 65 kilometres away from the airfield of the "Bayerische Militärfliegerschule 5" in Gersthofen - the place where the original photo was taken.
4 August, 14:52
![](/profiles/img/28909-839-s.png)
Your biplane shrinking machine is working as well as ever Bugsy. Another one to be proud of.
4 August, 16:39
![](/profiles/img/21997-347-s.jpg)
Thank you very much mates!
Dieter, the pictures are taken outdoor with two tripods.
I just added some pictures made in light tent.
4 August, 20:14
![](/profiles/img/108061-170-s.jpg)
This is a stunner Frank!! A gorgeous airframe and I absolutely love the paint scheme as well. Your typical eye for beautiful detail in all the right spots push this to your usual next level build. It is truly always a pleasure to watch one of your builds
5 August, 10:34
![](/profiles/img/20442-422-s.jpg)
I may not know much about WWI aircraft but I know a beautiful aircraft and model when I see one. Another stunner Frank.
5 August, 10:59
![](/profiles/img/13846-389-s.jpg)
Toll geworden!
Bin auch eine am Bauen, bin aber noch nicht soweit, wie du.
Will mir noch den Motor in 3D erstellen und drucken.
Gruss
5 August, 11:25
![](/profiles/img/69549-161-s.jpg)
Bughunter, that's another great result of your work. Perfectly built model and well presented. Congratulations! 👍👍👍
5 August, 18:08
![](/profiles/img/23186-383-s.jpg)
Beautiful !!! I was following the build with pleasure and the result is amazing 👍
Excellent pictures, as well 👍
11 August, 13:02
![](/profiles/img/21997-347-s.jpg)
Hello mates!
I went on a hiking holiday straight after the release of the final album of this project. That's why I haven't replied here yet. I can make up for that now: many thanks to everyone for the kind words! ❤️️
In case you have not seen it: there is also an Work-In-Progress album attached to the project.
19 August, 15:27
![](/profiles/img/user-s.jpg)
I just love the Pfalz D.III. You built a very beautiful rendition of it.
20 August, 07:22
![](/profiles/img/133143-131-s.jpg)
新しいフォトアルバムを追加しました。
22 18 August, 13:43
![](/profiles/img/28845-385-s.jpg)
Clear parts look very nice.
Q: Do you have any tips for cleaning up the paint work around window frames, or working with clear parts when painting around them?
20 August, 07:36
![](/profiles/img/128145-891-s.jpg)
新しいフォトアルバムを追加しました。
24 11 July, 21:06
![](/profiles/img/15888-619-s.jpg)
Oh ya!
Built a couple of Broplan vac kits, a real challenge but great for the feeling of overcoming a challenge and creative accomplishment
11 July, 23:27
![](/profiles/img/57594-145-s.jpg)
OMG, what a challenge! 🙂 Those panel lines look quite uneven, will you try to rescribe them or just take them for what they are? In any way, I am super curious how these sheets of plastic can be turned into a model, so I will watch with interest!
12 July, 02:31
![](/profiles/img/128145-891-s.jpg)
Welcome mates, the panellines are aweful but the material is so thin, i'm scarred that i cut right trough it when i try to rescribe them.
12 July, 06:24
![](/profiles/img/25743-467-s.jpg)
Following. Got my first vacu kit this weekend. I hope I can learn something here.
16 July, 14:48
![](/profiles/img/15888-619-s.jpg)
Hi DuperScale, I built a couple of Broplan vac ATR kits, converting one 72 500 to a 42 300. A few pics of the work in my "albums" if you're interested in the kind of model you can achieve from a Broplan kit with a bit of work…sweat and tears, foul language, alcohol and time….
16 July, 23:24
![](/profiles/img/28845-385-s.jpg)
DuperScale, how about scribing into a layer of primer paint?
This way, scribing should be a lot easier afaik, scribing into the primer layer of paing, and not plastic.
This guy on youtube did this, on regular plastic models though.
20 August, 05:21
![](/profiles/img/28845-385-s.jpg)
As for the clear parts, I wonder if it could be done this way
1) Cut out a square/rectangle shape, removing the oval form from windows. The larger the hole the better, to create some extra space around the old window shape. Enough space to work with putty later on.
2) Glue in a flat thin strip of transparent styrene on inside of model.
3) Glue in a square/rectangle shape transparent styrene, outside the model, laminated with the existing strip of transparent styrene on inside, so double layered.
If keeping the new window parts larger than the old window shape it should be easier to use some putty after adding masking tape that have the shape of the old windows. The larger these new outer square/rectangle window shapes are, the easier it is to add putty to create a smooth surface, then hopefully the center part is clear enough, to mask off the final shape of the old window shape, before painting.
Afaik a common issue using Mikro Kristal Klear is that you can't sand the clear part afterwards, because the clear part is like rubber iirc. You can iirc easily remove this clear part though, just poke/pull it out. Unsure if there would be any residue left after removing the rubber like liquid clear stuff after it dries.
20 August, 05:25
![](/profiles/img/28845-385-s.jpg)
Another thing one could do with clear parts an idea:
1) Glue in a long strip of transparent styrene on inside of plane.
2) Add some kind of epoxy or something that can be sanded, without the epoxy damaging the underlying transparent styrene.
3) Idea is to use the liquid stuff to fill in the perfectly shaped holes for the windows, then sand the liquid stuff flush after it dries.
What won't work imo, is doing multiple rounds of adding liquids to create some goo that goes transparent. I think if you sand this stuff multiple times adding more liquid stuff, you get a flawed result I think. I tried something like that with gloss varnish, trying to build up a solid clear shape. Did not work as expected.
20 August, 05:35
![](/profiles/img/28845-385-s.jpg)
In this thread, and in photo #13, the guy apparently put tape outside, and poured clear resin on the inside to fill the window holes. Unsure if such resin will react and maybe eat up or warp any thin parts ala vacuum kits. I guess this can be tested with some scrap plastic if having some piece left over.
Boeing 737-530 Smart Wings 1:144 | Album by Zbynek (1:144)
20 August, 07:35
![](/profiles/img/10148-258-s.jpg)
新しいフォトアルバムを追加しました。
25 25 July, 08:02
![](/profiles/img/10148-258-s.jpg)
These pictures start a build that gives me my first experience with 'Clear Prop' - and they are good ones! The fineness of the shapes, the accuracy of fit and the meaningfulness of the construction steps seem to combine to create a pleasurable building experience!
This plane is also highly interesting: originally derived as a drone for shooting practice from a small civilian predecessor model, hundreds were pulverised in the air. Some of those that survived this use went on to have an amazing career as light sports aircraft and enjoyed great popularity in the 1940s.
25 July, 08:08
![](/profiles/img/21997-347-s.jpg)
Oh, a brand new kit?
It is hard to keep track all your parallel running builds! You speed of building all those birds is simply unbelievable and a great mystery to me!
25 July, 11:44
![](/profiles/img/48972-166-s.jpg)
I have the same impressions as Bughunter, frankly speaking 🙂 Following this build for sure.
25 July, 13:00
![](/profiles/img/10148-258-s.jpg)
Hello mates! How nice that this small but lovely project has your interest and positive feedback! Indeed, a brand new kit that immediately caught my interest when I stumbled across it - so it ended up on the workbench straight away.
To answer the question about the current density of my projects: on the one hand, I sometimes wonder myself 🙂 On the other hand, I suspect that it has something to do with running three or four, maybe even five (at the moment, for example) projects in parallel . Something is 'always' being finished or started.
26 July, 14:32
![](/profiles/img/10148-258-s.jpg)
I made the following preparations for the bright red of the final surface: first I applied yellow followed by a layer of white to the model. After drying, I sanded this base, which should make the following red "glow", with 1000, 1200 and 2000 grit sandpaper to make the colour layers more transparent again, to get a smooth surface and to find any flaws - you can see a few exposed on the fuselage and tail unit. I am surprised by the very high quality of the kit and look forward to finishing it!
2 August, 19:30
![](/profiles/img/10148-258-s.jpg)
It looks like the Culver PQ-14 is ready! This was a most enjoyable project from start to finish. I am delighted with my first "clear prop" kit and I enjoyed the unusual history of the original. I made the seat belts and the aerial wiring, everything else can be found in the beautifully finished kit.
Thank you for your interest and your helpful and motivating comments!
7 August, 19:03
![](/profiles/img/44957-709-s.jpg)
Beautiful! Great work as always... 👍 And also: thanks for showing this - it gave me the opportunity to revisit Culver's lineage: the Culver Dart, Cadet, Model V... the role played by Al Mooney... the PQ drones... Lovely!
8 August, 15:24
![](/profiles/img/10148-258-s.jpg)
Thank you for your motivating comments and your interest in a not often seen aircraft, mates! Alex, your list was an inspiration for me to have a look - and to find some interesting aircraft and interesting references - Culver: an amazing manufacturer! thanks!
9 August, 07:09
![](/profiles/img/21997-347-s.jpg)
I'm back from Austria and this is finished already - Wow. That was quick, but with usual great quality!
19 August, 16:10
![](/profiles/img/10148-258-s.jpg)
Thank you for your words, I'm very pleased! I hope you enjoyed Austria! 🙂
20 August, 07:32
![](/profiles/img/35938-149-s.jpg)
新しいフォトアルバムを追加しました。
44 5 June, 13:13
![](/profiles/img/35938-149-s.jpg)
As usual, a full build video with all details can be found on my channel: Youtube Video
![](https://img.youtube.com/vi/nss7JcoysuQ/maxresdefault.jpg)
17 August, 18:02
![](/profiles/img/111789-903-s.jpg)
Great build, but I was surprised by the quality issues. Seems like these kits are from old molds, not the recent double seater ones.
17 August, 21:23
![](/profiles/img/35938-149-s.jpg)
@Mattes Danke! According to scalemates, these molds are from 1991. Hopefully, the Revell, Hasegawa and GWH kits I have are better ☺️
17 August, 21:49
![](/profiles/img/user-s.jpg)
I am very disappointed by this product. Yes it is finer than the kit parts but it is far from clear. The suppose to be transparent areas are almost opaque and show heavy print lines. To achieve an improvement over the kits parts you will need to cut out the frame and put clear foil into it. This will be a major endeavour due the the fragility of the frame.
Not recommended.
![1:35 Unimog S404 cabin side windows (FC Model Trend 37124) 37124](/products/img/5/2/4/1447524-10244-90-t180.jpg)
Unimog S404 cabin side windows
FC Model Trend 1:35
37124 20 August, 07:31
/ja/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=ja
35
35
/ja/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo