ウォール
Wall
bossy122
新しいフォトアルバムを追加しました。
新しいフォトアルバムを追加しました。
8 画像
Alfa Romeo 179 19791:20
10 some odd years and I am finally marking this one complete!
プロジェクト: Alfa Romeo 179 1979
All comments (10) » 8 26 May 2019, 01:53
bossy122
Some 5 years later, I have finally got the top and bottom to join together ( mostly ). The PE mesh for the radiators had these useless sides that fouled everything so I finally cut those off. Then I find that the butt end wasn't fitting properly either. I had to grind down this white metal bit that was supposed to act as a guide.
Some 5 years later, I have finally got the top and bottom to join together ( mostly ). The PE mesh for the radiators had these useless sides that fouled everything so I finally cut those off. Then I find that the butt end wasn't fitting properly either. I had to grind down this white metal bit that was supposed to act as a guide.
12 October, 05:41
October 31, 2024
September 28, 2024
September 24, 2024
bossy122
このアイテムを所有しています
このアイテムを所有しています
Peugeot 206 WRC "Gauloises" S. Jean-Joseph Catalunya 2001
Studio27 1:24
ST27-DC423C 24 September, 03:55
September 23, 2024
September 19, 2024
bossy122
新しいフォトアルバムを追加しました。
新しいフォトアルバムを追加しました。
7 19 September, 05:35
September 17, 2024
September 15, 2024
September 11, 2024
September 6, 2024
September 5, 2024
August 30, 2024
bossy122
この商品を注文中にする
この商品を注文中にする
Peugeot 206 WRC "Gauloises" S. Jean-Joseph Catalunya 2001
Studio27 1:24
ST27-DC423C 30 August, 00:01
August 29, 2024
bossy122
新しいフォトアルバムを追加しました。
新しいフォトアルバムを追加しました。
All comments (12) » 21 5 July, 20:08
August 27, 2024
August 23, 2024
August 13, 2024
August 4, 2024
bossy122
このアイテムを所有しています
このアイテムを所有しています
Peugeot 206 WRC "ESSO" MC '00 #9 #10 #17 - Sanremo '00 #9 #10 (Panizzi G/Panizzi H winner) #16
C.B · COM. 1:24
24.110 4 August, 20:01
July 29, 2024
July 28, 2024
July 20, 2024
July 5, 2024
June 30, 2024
June 29, 2024
June 20, 2024
bossy122
新しいフォトアルバムを追加しました。
新しいフォトアルバムを追加しました。
15 画像
Lancia Super Delta Liatti 1992 Rally New Zealand1:24
Even got those tiny PE windshield brackets on. For anyone who hasn't tried a wax pencil for applying microscopic pieces;...
All comments (8) » 28 19 March, 01:54
bossy122
There are a few 3D printed front grilles out there that have separated all the parts to make painting the 3 different colors easier. The problem I had with the foil is that I can never get that stuff to lay down smoothly.
There are a few 3D printed front grilles out there that have separated all the parts to make painting the 3 different colors easier. The problem I had with the foil is that I can never get that stuff to lay down smoothly.
17 June, 16:43
bossy122
One thing that bugged me with this kit is how "shallow" the seam lines are. I wasn't able to fill them all in with Panel Line paint.
One thing that bugged me with this kit is how "shallow" the seam lines are. I wasn't able to fill them all in with Panel Line paint.
19 June, 03:32
June 19, 2024
June 14, 2024
June 10, 2024
May 31, 2024
bossy122
新しいフォトアルバムを追加しました。
新しいフォトアルバムを追加しました。
11 3 May, 04:07
bossy122
I hope my ADD doesn't strike! So many models, so hard to focus on one. It'll be tackling the rear wing that will be the hurtle on this one. Four wings to try and get to remain together until completion. OR....I can cheat and use the 99 rear wing, which has different sized end plates, but I have some Museum Collection JPS markings to correct for that. Still debating.....
I hope my ADD doesn't strike! So many models, so hard to focus on one. It'll be tackling the rear wing that will be the hurtle on this one. Four wings to try and get to remain together until completion. OR....I can cheat and use the 99 rear wing, which has different sized end plates, but I have some Museum Collection JPS markings to correct for that. Still debating.....
18 May, 06:42
May 26, 2024
May 17, 2024
May 15, 2024
May 14, 2024
May 13, 2024
May 2, 2024
April 29, 2024
April 27, 2024
April 16, 2024
April 13, 2024
April 4, 2024
March 31, 2024
March 30, 2024
March 19, 2024
March 4, 2024
bossy122
新しいフォトアルバムを追加しました。
新しいフォトアルバムを追加しました。
All comments (28) » 36 5 April 2022, 00:14
Rui S
Great result indeed. Beautiful model 👍
Hope your lungs recover to 100%. I have had great difficulty recovering mine.
Great result indeed. Beautiful model 👍
Hope your lungs recover to 100%. I have had great difficulty recovering mine.
4 March, 01:33
February 29, 2024
February 26, 2024
February 5, 2024
bossy122
このアイテムを所有しています
このアイテムを所有しています
Porsche 917K '70 LM Win (for Fujimi)
Museum collection 1:24
D961 5 February, 23:21
January 31, 2024
January 28, 2024
January 23, 2024
January 20, 2024
January 17, 2024
January 15, 2024
January 13, 2024
January 6, 2024
bossy122
新しいフォトアルバムを追加しました。
新しいフォトアルバムを追加しました。
All comments (9) » 17 6 April 2022, 19:07
bossy122
Wow. I wish that I could answer that question. I took it out of storage and was going to pop off the engine cover but it's on there pretty good. I can't remember if I glued it in place or not. I'm guessing that I didn't use all the parts for the engine as I didn't intend to show off the engine so maybe something isn't fouling the covers fit. I wish I knew. I will tell you to be aware of the headrest piece, B8 onto A1, there should be NO seam there. And down inside the sidepods, B4, B2 into B11, that whole thing should be red and have no seams either. Same for the other side. Those were the issues I do remember.
Wow. I wish that I could answer that question. I took it out of storage and was going to pop off the engine cover but it's on there pretty good. I can't remember if I glued it in place or not. I'm guessing that I didn't use all the parts for the engine as I didn't intend to show off the engine so maybe something isn't fouling the covers fit. I wish I knew. I will tell you to be aware of the headrest piece, B8 onto A1, there should be NO seam there. And down inside the sidepods, B4, B2 into B11, that whole thing should be red and have no seams either. Same for the other side. Those were the issues I do remember.
6 January, 01:59
Starrryy
I really want to assemble this model with good engine detail. At the same time, I want to achieve a good docking. If you do not know what prevents the engine cover from closing well, I will have to find the reason myself. I hope everything will be solved by grinding the lid a little so that it becomes thinner. I know about the headrest and pallets thanks to your comments under the photo. Thank you very much!
I really want to assemble this model with good engine detail. At the same time, I want to achieve a good docking. If you do not know what prevents the engine cover from closing well, I will have to find the reason myself. I hope everything will be solved by grinding the lid a little so that it becomes thinner. I know about the headrest and pallets thanks to your comments under the photo. Thank you very much!
6 January, 09:54
January 3, 2024
December 28, 2023
bossy122
このアイテムを所有しています
このアイテムを所有しています
Porsche 917K '70 LM Win (for Fujimi)
Museum collection 1:24
D961 28 December 2023, 02:55
December 26, 2023
December 24, 2023
December 23, 2023
December 20, 2023
December 19, 2023
December 14, 2023
December 11, 2023
December 7, 2023
bossy122
新しいフォトアルバムを追加しました。
新しいフォトアルバムを追加しました。
3 画像
Lotus 1011:20
Out of mothballs, see if I can get anywhere with it. Got the wheels mocked in place, that's a start...
プロジェクト: Lotus 101
4 31 August 2019, 01:30
bossy122
Despite S27s CLEAR black and white photo, I got the rear suspension assembled. Note:the pieces for the drive sgafts they gave me are easily 2-3 cm too short. I have some spare brass rod that, while not the correct diameter, will be the correct length.
Despite S27s CLEAR black and white photo, I got the rear suspension assembled. Note:the pieces for the drive sgafts they gave me are easily 2-3 cm too short. I have some spare brass rod that, while not the correct diameter, will be the correct length.
29 November 2020, 02:19
November 20, 2023
November 12, 2023
November 9, 2023
November 8, 2023
bossy122
I am new to this GB thing on this site and am unclear on where the #group-build channel is. Is that on this site or a social media site, in which case I will have to excuse myself as I avoid social media like the plague.....yuck!
I am new to this GB thing on this site and am unclear on where the #group-build channel is. Is that on this site or a social media site, in which case I will have to excuse myself as I avoid social media like the plague.....yuck!
Pro Race Car Group Build
8. 8月 2023 まで 31. 1月 2024
8. 8月 2023 まで 31. 1月 2024
8 November 2023, 03:49
Matteo Pescarin
Hey Bossy, the voting will happen on a dedicated Discord server, essentially a text chat with several topic-specific channels. The server is entirely dedicated to scale modelling for cars and trucks, plus a few others for off-topic chats and other hobbies. Think of it like a forum, but realtime 🙂 The link I shared in the description of the event will allow you to join the server itself and register within it.
Hey Bossy, the voting will happen on a dedicated Discord server, essentially a text chat with several topic-specific channels. The server is entirely dedicated to scale modelling for cars and trucks, plus a few others for off-topic chats and other hobbies. Think of it like a forum, but realtime 🙂 The link I shared in the description of the event will allow you to join the server itself and register within it.
8 November 2023, 20:53
bossy122
このアイテムを所有しています
このアイテムを所有しています
Mitsubishi Lancer Evo. VI Rally '1999 Option
Decalpool 1:24
DP074 8 November 2023, 03:39
November 7, 2023
wnolder.php?lang=ja
2023-11-07 15:31:05
2017-03-10 08:20:20
30719
/ajax/wnolder.php?lang=ja&sd=2023-11-07 15:31:05&md=2017-03-10 08:20:20&filter=&w=30719
todo