McHales' Navy
The box art is beautiful
The box is packed solid.
Everything is in sealed plastic bags, except my left foot of course!
Sprues with fine detail have cushioned wrapping to protect them from breakage. It worked, there were no breakages in the box.
The hull is beautifully moulded but could have used some interior support. The lugs did sand down reasonably well but some filler was used to smooth the small depressions, 3 of them
Under hull aft detail is very well done.
Parts are supplied with very crisp detail
The sprues, many of them contain fine detail parts and no breakages. Merit have done themselves proud with this kit.
Beautiful detail on gun mounts.
Even Christian and Lode would be dissapointed with the detail included. Only because they wouldn't have to add it themselves!
The join wasn't perfect when I put these two parts together but with a little liquid putty it came out perfect.
The decals look nice. Time will tell!
Very small pe sheet is included
More PE would improve things emensely. Looks heavy and clunky.
I might need more putty to fill the gaps!
The mouth of the air catching thingamys was way too thick and had to be thinned
What is this? Cockpit? Dashboard? Captain's post? Help with all the naughty cal type names please???
Air horn or is it a fog horn?
Little house thingos and cut down 44 gallon drums.
Now, the elephant in the room. The windows need to go in after the paint right? But the gaps need to be filled before paint. OK Lode, over to you!!
The kit has a full compliment of torpedoes. They had gaps nearly the full length. I used Tamiya thin cement when I probably should have welded the halves together. Much sanding later the deliniation bands had to be re-scribed.
Nice detail and a snug fit. There is actually three parts per pressure hatch.
Bit more work needed here to match the railings up. I got the bottom one done first to stabilse the fit.
The torpedo tubes also needed lots of sanding. One finished and three partially done
What about the gaps?????? The deck and bridge don't meet at all. The plan is to paint seperately, then fix the windows in place, then fix the superstructure in with clamps then paint the joined areas.
Think this will present well when completed.
Getting those evil seams to dissapear.
Keeping in mind that almost nothing you see here is glue down, I have put things where they are supposed to be.
Gun mount does not fit, no surprise there, modifications needed, again!
It was going to be an OOB but as there is no anchor rope I have to do "some" alterations, don't I?
Detail is needed here, I have found some good resources so watch this space! Literally!
There are three exhaust systems that hang off the stern, I can't mount them yet though!
One of these things is not like the others, I snapped one of the rudders off while applying putty to the join between the deck and the hull. Fixed by drilling holes for a reinforcing wire and cryo glue to afix.
Port fore torpedo tube is exactly the same as the other three, or is it?
The torpedos used in this "early" PT was a Type 8 from WWI! The kit comes with four of them. There isn't a lot of detail on them though. Maybe I could do something with them????
If the boat was 80ft you can see how long the torpedos actually were!
Rear .50 cal mount and 20mm Orkerlon position on the rear deck. Ammo lockers immediately behind the 20mm mount. Engine room vents took up a lot of time, the gaps, joins and seams were difficult to reduce to a point where they wont show through the paint
Bridge wheel isn't there yet. I can't find info if it was metal or wood. Any experts out there can help with advice I am listening.
The rope is not my idea, I saw this done to another model on line but I thought it added to the overall effect. Hope you like it because it took me hours!
In situ.
Ignition wires have been placed on the 5" blast ejector thingos.
Starting to look a little crowded on deck
Power source for the search light and navigation light added.added.
The gaps are dreadful. Putty may not be the answer.
Rear 50 cal turret with the needlework done. The canvas is Tamiya JA Green and is a touch brighter than the Olive Drab.
I have worked for an unevenly faded deck colour on all of the wooden parts.
The putty will be sanded away and more putty applied. When it looks right a flat black base and olive green applied nice and dark in the joins. Lighter on the flat surfaces
If I did the screen again I would paint the pe, then fix the pe to the clear parts, then fix the whole thayng to the boat
The wheel is still to be painted and weathered, I'll nail it into place when prepared
I kept the stern darker because it is less 'open' than the bow. Lots of metal fittings here too. Not sure how they will be weathered as yet.
More putty and more sanding needed. Tried a couple of things out on the deck and fittings for weathering. Little bit of dry brushing and a bit of metal powder rubbed in. Everybody says that these boats were immaculately maintained but .....
The truth is very different. These boats patrolled all night and the crew slept all day.
How green is my cactus?
The elusive and unproductive Jay Dub and I sharing a cheap German beer at The Hoff bar and grill in inner city Melbourne.
Probably should have done these pics inside as there was too much light for the camera.
The gaps have been filled and re-filled and re-filled. Painted to keep the darker places in shadow.
There won't be much open deck area when the tubes are in place so it is darker than the front deck.
The deck has been kept darker under the torpedo tubes.
Not happy with the colour of the tarp rope. I might brown it up a little.
Tested a little Ushi iron powder drybrushed around the Orkerlon mount. This wouldn't get rusty as it would be well trodden every night.
Looks like we hit a sandbank last night!. All of the ruddeds have bee modified with brass rod inserted to replace the plastic pin.
And, this is why!
Lesson learned with the screen. nex time I would fix the pe to the screen then fix to the model. Not happy with the fading on the console. I will fix that later!
Hull fading and colour variation.
Clearer here. Bilge outlets will have some rust staining on the hull but only slightly as the hull is wood.
Gotta do something with that rope!!!
Still waiting for the clear flat lacquer to arrive.
Have had to put her in dry dock until it cools down. 42*C here atm!
コメント
2 8 July 2019, 02:28
Rene ScheiblichThis looks very delicious 😛 finally a ship in a non-microscopic scale😄
Why the need for more paint? Want to paint your toes as well? 😉
I'll grab a seat as well👍
8 July 2019, 11:14
Rene ScheiblichSure. I have some nice Maibock in the cooler, grab as many as you want 😛
8 July 2019, 18:29
Peter HardyThanks Lode! This is strictly OOB but, I know damn well I will end up modifying it! I am already dissatisfied with the shoulder holster thingos on the mounted guns. Some padding is needed! You blokes and Augie are going to laugh your heads off watching me succumb to the detailing bug,....... AGAIN!
9 July 2019, 08:39
Rene ScheiblichWouldn't be an original Hardy if you didn't modify a few bits and bobs here and there 😛 👍
9 July 2019, 08:41
RobbieI remember that show growing up. But not to get the rivet counter tag - PT-73 was not a Elco but a Higgins or Vosper. Not complaining but a Elco PT-73 would look nice since the show was pretty much made up. I have that kit and was toying with the idea of doing PT-109 when it was in the Panama Zone before it headed to the Pacific and destiny.
10 July 2019, 01:17
Peter HardyYou're right Robbie. It was a fictitious show and footage of many boats were used so it could have been anything. I did do some research into the differences between the Higgins and the Elco and found that changes happened to almost every boat on the production line and not done as 'batches' to a particular spec. On top of that from what info I can garner the two boats had a different length, the Higgins at 78' and the Elco at 80' but they had the same layout so for most mugs, me included, I don't honestly give a toss! I have never built a Merit kit before and don't recall seeing one done, recently at least, so it should be interesting for most of us. Don't worry about the rivet counter thing mate, I build for me not a competition. I build models not reproductions. Hope you enjoy the build Mate!! Cheers!!!
10 July 2019, 01:49
Kerry COXHoly PT's Skipper. !
How in hell did I miss seeing this hit the work bench. ?
I need time to digest this build.
👍 😉
10 July 2019, 03:59
Patrick HagelsteinCool! 🙂 Looking at the box art, sealing of sprues, protective cushioning and instructions this just breaths Trumpeter/Hobby Boss. Is Merit the mother company of those two?
10 July 2019, 04:10
Tim HeimerWhen it comes to movie or tv vehicles it's never the same and never easy to copy! Always a twist in it! Dukes of Hazzard, Or Christine the movie, was it a fury or Belvidere? Dirty Mary, crazy Larry- which year charger and which color ECT! Peter make it what you want! I won't tell!
10 July 2019, 04:40
Chris GreathouseI know McHales' Navy is from the '60s but if I find it on some random site (since it's so old), is it worth the watch? Binge-worthy in the background while I work on my Volvo or painting project?
10 July 2019, 04:56
Herbert TyszakOriginal PT 73 was a 78ft. Higgins 56 ton boat, comm September 1942, decomm December 1945. Action in (Aleutions&New Guinea)
In the Movie, they use 3 diffrend boats, non over 71ft. One of them a British Vosper Mark 2, so there was no 80 ft. Elco boat, Robbie you right on this one. Do the Monster as it is. I am still in, and have beer.
10 July 2019, 08:21
Patrick HagelsteinExactly! It looks like a cool boat anyway! And while watching the show, you can stil go brrrr brrrr brrr over the table with it. 😉
10 July 2019, 14:03
Slavo HazuchaCan´t work out any smug Picard´ish comment for this at the moment... Simply watching, things will come together😉 !
10 July 2019, 14:31
RobbieFound this link of McHales' Navy to view as we watch this thing get built - imdb.com/title/tt0055689/trivia
10 July 2019, 20:58
Michael HickeyThis will be awesome, and totally different from your last project. They don't make t.v shows like that anymore, pure classic.🙂
11 July 2019, 01:48
Patrick HagelsteinNever seen it before but I enjoyed every minute of it! Why am I whistling the Airwolf tune though?....
11 July 2019, 03:16
Jay DubyaFor what it's worth Pete, I remember going to a Saturday afternoon session (aka matinee) of McHales Navy where it was the support for some Disney movie no doubt. The cinema was Greater Union Innaloo (being a suburb of Perth West Oz), well before they turned into a megaplex. What I don't remember was the actual boat being the star of the show, unlike say the Corsairs in Baa Baa Black sheep or Little John's BAR in Combat ( yep the one with Vic Morrow ). If I recall correctly, there seemed to be a lot of stock footage used. Made anymore progress?
14 July 2019, 06:36
Peter HardyBeen at it most of the weekend Jay Dub. The PT I mean. All prep work so far, not ver photogenic but I have posted the completed Desmosedici.
14 July 2019, 06:40
Jay DubyaWhich sounds like some sort of a religious act, involving the worship of a modern deity
14 July 2019, 06:57
Peter HardyWhat happens under the deck stays under the deck! No interior on this one Kez.
14 July 2019, 09:26
Peter HardyWelcome Ant!
Lode. Ahh yes of course. The making or breaking of this kit will be the paint. Very low part count. The life raft is awful at best. Might try and jazz it up a bit.
Mrs. Hardy polishes it regularly Slavo.
15 July 2019, 06:55
Jay DubyaProbably a good thing your missus (Laurel ???) isn't on Scalemates Cracka Hardy
15 July 2019, 08:16
Peter HardyWell JDub, now you know how I ended up with the nickname!
Mick, I thought it was pretty good too! I come up with one for every fifty Tim does!
15 July 2019, 08:54
Tim HeimerPeter, my thought would be to hand paint around the windows, then install the windows, then about 6 hrs before painting use a white glue or small amount of clay putty and then paint, once dry remove glue or what ever with a toothpick.
15 July 2019, 12:37
Tim HeimerGood thing Peter has a small ego! I'd hate to hear him blow his own horn!
15 July 2019, 12:39
Alec KI'll join in. Looking good so far. I almost fainted reading the caption to photo 17 - never thought I would see the day. You are truly lost now... 😄
15 July 2019, 13:52
Peter HardyAlec, I was thinking of Lode doing this kit, or you!
Tim, we are not friends anymore. Some things should never be said out loud. Especially when one is blowing one's horn!
15 July 2019, 21:15
Peter HardyYou blokes kill me, I'm going to work and be miserable for a few hours!
15 July 2019, 21:25
Tim HeimerNothing stops Peter, he's like a bull in a china shop but he gets it done!
16 July 2019, 21:00
Jay DubyaYour fans await you Peter - do you have an update for your expectant followers?
PS I may have known about the nickname, but just want to ensure our European mates 'got it' too !
21 July 2019, 10:06
Peter HardyJay Dub, spent most of the weekend sanding torpedo Tube joins. I figure that as they were rolled steel they will need a different finish to the rest of the boat which was wood, they would have one weld line not two. So, progress has slowed. Not sure if anyone unaware of Oz football culture would have picked up on the nickname theme.
No sailors Mick, doubt a resin Earnest Borgnine figure is out there!
21 July 2019, 21:10
Slavo HazuchaNews from the boatyard! 👍 I hope you'll get the torps properly greased & polished!😉
Seriously - good stuff, I very much look forward to see it come together!
22 July 2019, 06:04
Bart GoesaertNice work so far... That mating of the hull and bridge will come around...
22 July 2019, 08:10
Peter HardyPlenty of time to work it out, really looking forward to painting her.
22 July 2019, 10:25
Kerry COXNot knowing anything about the vessel your building Peter, I can offer no comment other tan 'looking good bud.' !
It seems that there are some things you wished could be better than what you have been dealt. 🙁
But given that you seem to be always able to rise to a challenge, I will just have to sit and marvel at your perseverance. 🙂
22 July 2019, 10:35
Jay DubyaI did see some 1:35 crew for the Elco 80' model on evilbay - that'd make for a chubby 1:48 Ernest Borgnine Pete !
22 July 2019, 10:49
Peter HardyThanks Jimbo. The cabins haven't been secured and won't be for a while. I will build this thing in modules like a battleship because of the way it has to be assembled. Spruce "B" has been stripped clean and is now in the rubbish bin under the bench so I am making progress. The gaps are driving me insane but, on the plus side I am "developing my putty sanding skills"! Might even get some primer on the hull next weekend depending on how much I drink tonight!
27 July 2019, 01:15
Peter HardyPatrick, I don't waste alcohol!
JC, I use two types of putty, the Vallejo you recommend for much the same reasons and a MR Putty liquid. The Vallejo I have good enough control with but the liquid is a skill I am still working on, along with many many others! I should have some pics on Monday showing progress.
27 July 2019, 21:45
Kerry COXPeter, Google has come to your aid. Have a look at this. google.com.au/url?sa..ust=1564459490971103
29 July 2019, 04:06
Kerry COXAnd, this for the terminology for the parts of the boat. (Just for fun). 👍 maritime.org/doc/pt/know/
29 July 2019, 04:12
Kerry COXAND, then, along came Jones. .......................pt103.com/PT_Boat_Components_Helm.html
29 July 2019, 04:26
Kerry COXAll I did was ask Google a question.
"What is the PT boat helm made of. ?" and the links pop up. 👍 🙂
29 July 2019, 06:28
Peter HardyLOL!!! I can't help it if you are smarter than me Kez! I gotta run wot I brung! Thanks for all the links too mate, I've printed everything up and put it in a bound binder. Got some interesting reading to do!
29 July 2019, 06:42
Slavo HazuchaBoat´s looking seriously good already 👍 + even the Germans are spying from a U-boat, as pic 39 clearly shows!😉
29 July 2019, 09:36
Peter HardyNo concern about the U Boot Slavo, it's in dry dock for another year. No radio antenna so they can't call in an air strike either. The only torpedo that fits in that Boot is still in the box so I reckon the PT is safe enough, for a while anyway. I was supposed to do this OOB but, I am suffering from overexposure to an extreme case of detail mania! Woke up this morning with a cunning plan for a shaving kit in the head. I gotta get out more often!
30 July 2019, 05:57
Peter HardyJimmy C, the torpedos are as smooth as I can get them. Stupidly I chose to use Tamiya Extra Thin which is a very good cement but I should have welded the seams. I will cover them with Alclad Base Black which will hide the seams. The deck has an awfully inconsistent join with the hull. If I were to do this build again I would reinforce the hull both vertically and from side to side. I have a concern that when I close the gap between the deck and the bridge and ward room it will pull the deck out of shape. I think the base problem is that the deck has no camber from centerline to each gunwhale. If this boat put to sea everyone on board would drown because the water coming over the deck would stay on the deck and eventually fill the hull. Anyhow, I have used the plastic putty we discussed earlier to give me a smooth join from hull to deck.
30 July 2019, 06:13
Peter HardyWell aren't you going to get a big surprise Lode! I will send you a couple of pics on Skype!
30 July 2019, 08:58
Martin OostromI don't think any camber is needed. Just put the throttle to the max for a couple of minutes. All the water will easily flow into the wake!
What happened to the avatar Peter? Now I can't find you in the masses anymore!
30 July 2019, 09:26
Peter HardyJust look for a couple of feet in front of a camp fire and I will be 2 metres from them!
30 July 2019, 10:59
Peter HardyJC, I'll just use the kit stand. Yep, getting the joins to disappear has been a task and a half but I feel Kerry's hot breath in my ear!
Thanks Tim, but they never made the barbie! Still attached to the big turkey.
Marty, .......... Ahhh, I got nothing.
Alec, you started this!
Lode, you are the only gentleman on this site!
30 July 2019, 21:12
Peter HardyWell if it isn't Deliverance Don! Yes, I am still working on it. How are the banjo lessons going y'all?
31 July 2019, 02:33
Michael HickeyBoats looking good but mate those legs look like they need a bit of colour in them, especially for a Queenslander.😢🙂
31 July 2019, 12:58
Peter HardyAlec, OK I will change it back if I can find the pic!
Marty, there is no need to post selfies!
Thank you Christian, just taking my time and getting the little things right!
31 July 2019, 21:59
Kerry COXI do like the lanyard stitched through the canvas surrounds on the gun mounts. !
Overall, a most impressive build Peter, as with all your others. 😉
5 August 2019, 02:50
Bart GoesaertLooking good so far, that stitching is a very nice feature... That opened up torpedo tube too
5 August 2019, 08:21
Martin OostromBoy oh boy. Taking your bike building skills to boats now? You're doing a great job, my Aussie friend.
Painting this beast will be another challenge though.
5 August 2019, 08:48
Peter HardyThanks for your encouragement everyone, I cannot claim originality on the tarp lashings. Saw a model on line with it and thought it looked terrific so, had a go. Happy with the outcome but if I ever did it again I'd go with .1 binding rather than the .2 that I used for this. The torpedo Tube was a Kez inspired addition, never done anything like it before and yes JC, a great deal of courage was employed! The paint? Well all I can say at the moment is it will be mostly acrylics and buckets of the stuff!
5 August 2019, 09:04
Kerry COXIs there no enamels that would do the job.?
As it will take two to three times the volume of acrylics to do what one application of enamels can. Meaning, less time with the gun in hand and thinner the paint and more detail will come through.
Your building skills are phenomenal Peter, don't screw them up with half inch thick layers of acrylics. I mean it. !
5 August 2019, 11:43
Tim HeimerNot to mention with the enamel base it makes it easy for acrylic detailing. IMHO
5 August 2019, 17:01
Kerry COXLode. Thank you for the comment on the acrylics subject. 👍
I am at a loss as to what Tim meant. :-/
5 August 2019, 21:53
Tim HeimerKez, if you start out with an enamel coat 1st and then if you do weathering, ect with acrylics and lets say it goes on heavier than you wanted or some leaked to another location, ect. then with acrylic thinner it's easy to remove without taking the base coat off.
5 August 2019, 22:20
Jay DubyaNice one Cracka -it's coming along nicely. Mind you, I always thought these boats were grey, but that must because my memories are in black & white ... just like the show!
2 September 2019, 12:27
Chris GreathouseLooking really good buddy! And after marathoning the show, I can't wait to see your boat!
2 September 2019, 18:39
Peter HardyJay Dub, very early boats were US Navy grey but shone like beacons in the Solomon Islands during the night. One of the tasks there was to attack the Tokyo Express resupplying the Japanese land forces on Guadalcanal. The olive green made it difficult to silhouette the boats against the jungle covered islands at night.
Chris, I don't model during the week as I want to make sure I get time with my Wife. I spend all weekend in my hobby room so it only seems fair. I do get frustrated with my slow progress from time to time though!
JC, someone as awesome looking as me can't help it!
Slavo, been pretty crook for a few weeks and had to keep away from the finer details while I was always trying to avoid coughing up a lung. Should make some solid progress once I can get past the putty stage.
2 September 2019, 21:09
SpanjaardLooking good... speed is relative (it depends who you compare with) and what counts is the result. so relax and enjoy. you will enjoy watching it in your display cabinet more, the more time you spend doing it right😉
2 September 2019, 22:29
Kerry COXIf you know his wife, it is no wonder he wants to spend so much time with her. 😉
👍
Like all your mates say Peter, slow and steady will bare fruit. 👍 🙂
3 September 2019, 00:31
Peter HardyDonny Boy, don't try to devolve my thread!
Thanks Mick, but what about the model?
Spanjaard, It is sooooooo slow but I am producing more than you atm!!
Lode, I have been delayed by the USS Putty but hope to make up some ground this weekend!
Kez, I must be getting picky in my old age!!
3 September 2019, 02:48
Jay Dubya... as is snipping, sanding, dry fitting, gluing, putty-ing, painting and ... photographing.
But, the boy can find a bargain!
4 September 2019, 01:32
Martin OostromJay must be spreading some disease. Haven't done much either lately. I must have left my mojo in France.
Anyhow. The boat looks great, as does mrs Hardy, as do the beers in Melbourne. Having doubts about the guys drinking the beers 🙂
4 September 2019, 09:45
Peter HardyStruth! Which pics did I post? It was only a German Pilsner, not like it was Belgian Beer! Ohh, it's the new avatar isn't it? Your mistaking that chiselled iron hard physique for lady bumps aren't you!
4 September 2019, 11:28
RobbieWhat ! no Tooheys? That is what I was trying to massively consume when I visited OZ in the late '70's
6 September 2019, 19:31
Peter HardyJust a heads up, I am waiting for some Testors Flat Clear Lacquer to arrive from eBay next week so I can continue. I'll post some progress pics tomorrow evening.
10 September 2019, 06:55
Tim HeimerHey Peter, what's with the breast implants? You were fine the way you were!
10 September 2019, 12:48
Slavo HazuchaI think the kind of orange-brown-ish color as seen cca. 2/3 down the way of Peter's avatar pics left boob curve where it hits the shadow would be most suitable for the rope...😉
12 September 2019, 20:17
Peter HardySlavo, you are making me feel uncomfortable. My eyes are up here!
JC, I have the aforementioned Tamiya panel liner. I will try it before I seal the acrylic with clear flat lacquer as it will spread through the acrylic and stain it better. Thanks for the idea old mate!
12 September 2019, 21:12
Peter HardyHolly, I am assuming you mean pic 59. You got a mention that night too, not actually present but not forgotten.
12 September 2019, 21:14
Slavo HazuchaPeter it's all because I secretly think it's actually plausible for the rope to be white, the salt, water & sun in the Pacific rather bleaching than coffee-tanning stuff exposed to these elements...😉
Great looking boat, I really like the deal with the fading & the details - being absolutely serious here for once...
12 September 2019, 21:31
Peter HardyYou know Tim, when I saw you had commented on my album I thought to myself, "Here we go, something about memories of PT boats fading away" and you floored me with an encouraging comment! You are full of surprises my Michiganiac friend!
13 September 2019, 23:14
Martin OostromGeez mate, I never knew you were capable of painting a non-shiny object that well. I think you listened to Yoda very well. Darth Hardy!
14 September 2019, 09:04
Peter HardyIt's got one Tim, I just haven't put it on the command console yet!
14 September 2019, 21:54
Jay DubyaGood to see you back in the man cave Pete, must be something to do with the weather up there in FNQ. Thanks for the update, mate.
8 December 2019, 04:49
Slavo HazuchaNice progress - boat looks pretty much ready for action! Good you did not destroy it with weathering & I like the glimpse of the shiny torpedo in the tube cutout... Guess a bike-man could not let go without some metal on the build... The horn would be too much "in your face", so the torp is a good choice...😢 Were these still the early "kinetic penetrator" mark 14´s or did these boats have torpedoes that actually exploded upon a hit? Good work all around... 👍
42°C sounds pretty punishing, my problem on the other side of the globe is the 16:00 darkness fall and having to work with interior light only... No lack of cooling options though 😄
8 December 2019, 10:57
Tim HeimerImpressive mate! I couldn't tell if you fixed your rope problem on the last pic.
8 December 2019, 14:55
Peter HardyNo I haven't Tim. Mulling over options still.
Slavo, you have heard of powder coating? Painting anything with an airbrush in this heat that's exactly what you get!
8 December 2019, 21:30
Bart GoesaertWell if they rope is actual rope, you can try to wash it with tea, a pretty strong one, depends on the color you want. Beter to do this before application. If it is kitchenrope, I'll fear for it..
9 December 2019, 08:05
Peter HardyAs the MTB in question works in the tropics I'd say sun bleached Bart. I figure a string would be ideal.
9 December 2019, 08:32
Peter HardyThank you Herr Shildermans. I know it isn't as good as you say but I am very proud you give me praise on a boat! Thank you!
10 December 2019, 08:48
Michael HickeyHey Peter, how's the dinghy coming along?, I've been watching while I wet a line here on the wharf.😢
12 December 2019, 00:34
Peter HardyHad to stop because it's so farking hot Mick. I need to do some detail painting but my airbrush just spits out carpet! I'm doing a flying thing atm.
12 December 2019, 01:41
Michael HickeyHot what's that, with an afternoon sea breeze blowin in everyday I'm as cool as a cucumber.😢 Well she's looking good anyway mate, and that flying thingie is coming along pretty good as well.👍🙂
12 December 2019, 02:53
Album info
A 1960s afternoon TV favorite was the slap stick adventures of the 80ft Elco PT 73, somewhere in the Soloman Islands. While the real heros had been doing their duty, the un-navylike crew of this PT kept many small boys and their parents in stitches watching them evade detection of the very navy Capt Binghampton. Although the crew were after laughs the boat was always the star of the show. I hope to bring this awesomely powerful hand crafted machine to life 50 years after watching Ernest Borgnine's depiction of being Skipper of the boat.
