Breguet Br.19 A2

1
August 11, 2020
2
December 9, 2020
3
August 11, 2020
As is possible to see, kit requires a lot of sanding.
4
August 11, 2020
Kit's general arrangement. Note different engines' options.
5
August 11, 2020
6
August 11, 2020
First step of primer
7
August 11, 2020
Some "surgery" was required in order to attach new engine (Venezuelan version was powered with Hispano-Suiza engine"
8
August 11, 2020
Improvement the interior with styrene
9
August 11, 2020
10
August 11, 2020
11
August 11, 2020
Seat an interior, made in scratch
12
August 11, 2020
Some scratch in order to improve the fuselage interior
13
August 11, 2020
14
August 11, 2020
15
August 11, 2020
As noted, Hispano-Suiza engine option does not match with fuselage; a new "surgery" is required
16
August 11, 2020
Fortunately, styrene sheet "V-groove" match with the fuselage exterior.........
17
August 11, 2020
18
August 11, 2020
Here, with adapted engine....
19
August 11, 2020
As you will see at next picture; provided wheels are very difficult to clean-up due to excess of plastic. I decided to make my own wheels, using little pieces of wire and put the together .....
20
August 11, 2020
Here provided wheels; as indicated before, excess of plastic is very difficult to clean.
21
August 11, 2020
cutting wheels' "two faces" and making a "sandwich" with the wire's arrangement ............
22
August 11, 2020
Here the final results; cutting excess of wire, covering the area with putty and sanding
23
August 11, 2020
Now, masking the tires in order to paint the wheels itself with dark green
24
August 11, 2020
Here, final results...
25
August 11, 2020
As no pin or any reference to install the wing, I used these jigs..
26
August 11, 2020
General view with upper wing
27
August 11, 2020
Installing wheels and supports. Prop was painted in oil colors in order to simulate wood.
28
August 11, 2020
Here the armament; double Lewis installation; very nice improvement
29
August 11, 2020
Lower attachements
30
August 11, 2020
31
August 11, 2020
32
August 11, 2020
the lower surface of upper wing came very "flat"; without any sign of visible structure typical of that age. I decide to simulate the ribs using styrene strips
33
August 11, 2020
34
August 11, 2020
35
August 11, 2020
Installing decals.......
36
August 11, 2020
Armament kit
37
August 11, 2020
Here, the kit with painted Lewis .....
38
August 11, 2020
those supports provided by the kit are very short; I decided to make them..........
39
August 11, 2020
I added some improvement regarding prop's attachments
40
August 11, 2020
41
August 11, 2020
42
August 11, 2020
43
August 11, 2020
44
August 11, 2020
45
August 11, 2020
46
August 11, 2020
47
August 11, 2020
48
August 11, 2020
49
August 11, 2020
50
August 11, 2020

5 11 August 2020, 11:43

Łukasz Gliński
Brave choice and incredible perseverance. I have the same kit and it's hard to believe it can be built so nicely.
Will use your pics as a reference once I'm going to get courageous enough to start it 😄

11 August 2020, 12:56

Alex K
Oh my! I second Lukasz's comment: I also have this kit in my stash, but by the time I would have the skills to deal with it (in some decades...) I'm sure a new kit would have appeared! You did a wonderful job, congratulations! 👍 👍

11 August 2020, 13:58

Gustavo Bruzual
thanks a lot for you comments; certainly, it is a very difficult kit with no too much references in the web for improvements...

11 August 2020, 14:37

Skyhiker
The photos of the finished piece are too dark to see all your work. I'd love to see this plane in the same light as your construction photos.

9 December 2020, 12:54

Alex K
Congratulations on the well-deserved prize!

9 December 2020, 19:07

Gustavo Bruzual
I will try to upload more pics. thanks for your notes.

19 December 2020, 03:59