SU-7BKL, OEZ Letohrad 1:48 build kit - part II
I chose this camouflage for my model:
machine No. 6502, appearance from 1986 - military exercise "Družba 86"
machine No. 6502, appearance from 1986 - military exercise "Družba 86"
I sprayed preshading on the finished base
I sprayed preshading on the finished base
The lower surfaces took on a pale blue color ...
... and the upper surfaces received their three-color "coat"
Air brakes from the outside...
... air brakes from the inside.
Preparation of additional tanks and rocket launchers.
preparation of parts for landing gear assembly
preparation of parts for landing gear assembly
front landing gear leg - original condition
front landing gear leg - original condition
front landing gear leg - original condition
front chassis leg - after adjustment
front chassis leg - after adjustment
front chassis leg - after adjustment
front chassis leg - after adjustment
front chassis leg - after adjustment
repaired and painted front landing gear
repaired and painted front landing gear
repaired and painted front landing gear
adding details to the main landing gear parts
adding details to the main landing gear parts
adding details to the main landing gear parts
adding details to the main landing gear parts
adding details to the main landing gear parts
adding details to the main landing gear parts
adding details to the main landing gear parts
adding details to the main landing gear parts
adding details to the main landing gear parts
adding details to the main landing gear parts
adding details to the main landing gear parts
adding details to the main landing gear parts
repaired front undercarriage shaft covers
repaired front undercarriage shaft covers
repaired main landing gear covers
repaired main landing gear covers
New sheet metal covers for the main landing gear
painted yellow identification stripes in order to distinguish the warring parties in the military exercise Družba 1986
painted yellow identification stripes in order to distinguish the warring parties in the military exercise Družba 1986
painted yellow identification stripes in order to distinguish the warring parties in the military exercise Družba 1986
painted yellow identification stripes in order to distinguish the warring parties in the military exercise Družba 1986
a towing eye added to the stern of the aircraft
made new hinges for rocket starter engines
blue aerodynamic hanger covers
stencils on the landing gear parts
stencils on the air brakes
stencils on the upper surfaces of the aircraft
stencils on the upper surfaces of the aircraft
stencils on the upper surfaces of the aircraft in detail
stencils on the upper surfaces of the aircraft in detail
stencils on the lower surfaces of the aircraft
stencils on the lower surfaces of the aircraft
The pilot seat is in place.
The pilot seat is in place.
The pilot seat is in place.
hydraulic pipe before painting
hydraulic pipe before painting
hydraulic piping after painting and slight contamination of the interior area of the air brakes
hydraulic piping after painting and slight contamination of the interior area of the air brakes
pistons for air brakes - the original parts in the kit were short. That's why I replaced the moving part of the piston with a new part made of a hypodermic needle.
I made a hydraulic pipes from a thin wire and glued it to the body of the piston
the air brakes are in place
the air brakes are in place
the air brakes are in place
the air brakes are in place
the air brakes are in place
the air brakes are in place
I glued the canopy of the cabin in the open position
I glued the canopy of the cabin in the open position
the front chassis is in place - the details on the sides of the shaft are photo-etched parts, cables and tubes that I made of wires
the front chassis is in place - the details on the sides of the shaft are photo-etched parts, cables and tubes that I made of wires
the front chassis is in place - the details on the sides of the shaft are photo-etched parts, cables and tubes that I made of wires
Pitot tube (made of injection needles), position light - inner (red) drop-shaped bulb cover made with a drill
the main landing gear is installed
right main landing gear - inside view
left main landing gear - inside view
left main landing gear - outside view
right main landing gear - outside view
SUKHOI is already standing on its own feet 🙂
preparation of hydraulic distributions - thin wires and tubes of various diameters
preparation of hydraulic distributions - thin wires and tubes of various diameters
preparation of hydraulic distributions - thin wires and tubes of various diameters
preparation of hydraulic distributions - thin wires and tubes of various diameters
part of the hydraulic piping is installed - I will gradually add more piping
part of the hydraulic piping is installed - I will gradually add more piping
コメント
16 17 December 2020, 07:16
Ludvík KružíkThank you. Now I have work to complete the details of the landing gear and the interior of the landig gear space and airbrakes. These components are not part of the kit. I'll use accessory kits and I'll have to make some details.
27 December 2020, 11:49
Ludvík KružíkAfter a short break, I continue working. Today I worked on improving the front landing gear leg.
13 January 2021, 22:08
Ludvík KružíkThank you :-D . It's an old kit. I'm trying to correct his shortcomings. And I can admit that I enjoy it a lot 🙂 .
16 January 2021, 18:20
Ludvík KružíkWork continues to complete the landing gear details. Some details I made new, some are from the additional set Eduard
17 January 2021, 23:20
Ludvík KružíkI added a few details, applied the decals and painted the yellow identification stripes
21 January 2021, 22:36
Agustin PrellezoI saw that plane in a museum and I remember the landing gear was extremely complex. I think yours is almost perfect.
25 January 2021, 17:58
Slavo HazuchaOne hardly ever sees this gem of days passed and today I stumble upon 2!
Very nice work, the big-ed pack really helps big-time to wash away the years... Looking forward to you crossing the finish line! 👍
25 January 2021, 22:25
Ludvík Kružíkto Agustin:
Yes, the Sukhoi landing gear is complicated. The kit is very schematic and non-model. I try to give the landing gear on my model as realistically as possible.
25 January 2021, 22:39
Ludvík KružíkThank you Slavo! It is already a very old set. The detail sets helped me a lot to rejuvenate the set. But there are still a lot of small parts that I have to do. But it's part of modeling and I like it 🙂
25 January 2021, 23:04
Ludvík KružíkGentlemen, thank you for your support :-D
I continue to add details. Now I'm working on the details of the interior of the air brakes. It goes slowly, the parts are small and I have to make them all 4 times.
7 February 2021, 15:11
Maciej BellosAre the cracks one the yellow paint made on purpose? So as to reflect the temporary nature of the bands?
8 February 2021, 21:16
Ludvík KružíkYes, that was my intention. The yellow stripes on the fuselage and wings were painted with water-washable paint and served as an identification of the "enemy" for the duration of the military exercise. Immediately after painting under the stripes, the original color shone through. And due to weather conditions and atmospheric humidity, the stripes gradually washed away.
8 February 2021, 22:43
Ludvík KružíkI started working on the landing gear. Details are photoetched parts and wires of various diameters
10 February 2021, 22:57
