Hawker Siddeley Harrier T.4 (Sword)
![Album image #1 Album image #1](/albums/img/3/3/0/940330-10105-31-720.jpg)
Nice artwork on the box, but I won't be using this scheme.
![Album image #2 Album image #2](/albums/img/3/3/1/940331-10105-26-720.jpg)
Not a lot of plastic. Here is the main sprue.
![Album image #3 Album image #3](/albums/img/3/3/2/940332-10105-76-720.jpg)
And the rest. Note the solitary resin bit for the air brake bay.
![Album image #4 Album image #4](/albums/img/3/3/3/940333-10105-81-720.jpg)
The kit does not have the blow-in doors open, so hopefully one of these sets will fit!
![Album image #5 Album image #5](/albums/img/3/3/4/940334-10105-61-720.jpg)
The very cool DERA (now QinetiQ) Advanced Control Technology test aircraft scheme.
![Album image #6 Album image #6](/albums/img/3/3/5/940335-10105-68-720.jpg)
Kit decals and photoetch fret.
![Album image #7 Album image #7](/albums/img/3/3/8/940338-10105-28-720.jpg)
The pre-painted instrument panels are the wrong colour grey. Oops.
![Album image #8 Album image #8](/albums/img/3/3/7/940337-10105-30-720.jpg)
Out with the 10/0 brush and a bit of Dark Admiralty Grey goes on. This is just the first coat.
![Album image #9 Album image #9](/albums/img/3/4/0/940340-10105-64-720.jpg)
Cockpit tubs went together well.
![Album image #10 Album image #10](/albums/img/3/3/6/940336-10105-58-720.jpg)
Kind of a blank canvas for the ejection seats however. But that's OK because...
![Album image #11 Album image #11](/albums/img/3/3/9/940339-10105-86-720.jpg)
...we can tart up those babies! Actually I think these came out pretty good.
![Album image #12 Album image #12](/albums/img/5/0/0/950500-10105-99-720.jpg)
Fuselage together. The Freightdog intakes fit very well.
![Album image #13 Album image #13](/albums/img/5/0/2/950502-10105-72-720.jpg)
The special instrumentation pods carried by XW175 were made from some spare drop tanks. Looks pretty rough at this stage!
![Album image #14 Album image #14](/albums/img/5/0/3/950503-10105-21-720.jpg)
Whew, that looks better. A bit of sanding and a splash of paint makes all the difference.
![Album image #15 Album image #15](/albums/img/5/0/1/950501-10105-94-720.jpg)
I still need to do some work with the apertures/sensors on the port pod. Antennae will be added later.
![Album image #16 Album image #16](/albums/img/5/0/5/950505-10105-87-720.jpg)
The front coaming from the kit was a joke - wider than the fuselage! I scratchbuilt one and added a PE HUD.
![Album image #17 Album image #17](/albums/img/5/0/4/950504-10105-11-720.jpg)
It almost looks like it should. Almost.
![Album image #18 Album image #18](/albums/img/5/0/7/950507-10105-10-720.jpg)
All primed up and ready to go!
![Album image #19 Album image #19](/albums/img/5/0/6/950506-10105-47-720.jpg)
I'll start with an overall white as a base for the Raspberry Ripple scheme.
![Album image #20 Album image #20](/albums/img/0/1/1/955011-10105-29-720.jpg)
Overall coat(s) of white. I used Testors RLM21 which...
![Album image #21 Album image #21](/albums/img/0/0/9/955009-10105-62-720.jpg)
...took three days to dry. Never again!
![Album image #22 Album image #22](/albums/img/0/1/0/955010-10105-12-720.jpg)
I probably should have done the red first, but instead painted Oxford Blue (from MRP).
![Album image #23 Album image #23](/albums/img/0/1/2/955012-10105-34-720.jpg)
MRP airbrush ready paints have the viscosity of water, and take many light coats to build up. But it goes on smooth!
![Album image #24 Album image #24](/albums/img/0/1/3/955013-10105-79-720.jpg)
MRP Signal Red on the tail.
![Album image #25 Album image #25](/albums/img/0/1/4/955014-10105-88-720.jpg)
And the rest of the red areas. Still lots of clean-up to do, fix some overspray, micro-mesh some edges, etc.
![Album image #26 Album image #26](/albums/img/0/1/5/955015-10105-25-720.jpg)
As far as I can tell, I followed the scheme as shown in photos. Can't wait for stickers!
![Album image #27 Album image #27](/albums/img/1/8/9/960189-10105-71-720.jpg)
She looks a lot better with her stickers on!
![Album image #28 Album image #28](/albums/img/1/9/0/960190-10105-32-720.jpg)
The Vingtor decals are very thin and snuggle down nicely.
![Album image #29 Album image #29](/albums/img/1/9/1/960191-10105-81-720.jpg)
The same scheme on the Combat Decals sheets has several inaccuracies.
![Album image #30 Album image #30](/albums/img/1/6/5/968165-10105-22-720.jpg)
Now this thing was fiddly!
![Album image #31 Album image #31](/albums/img/1/6/6/968166-10105-22-720.jpg)
The belly of the beast.
![Album image #32 Album image #32](/albums/img/1/6/7/968167-10105-87-720.jpg)
Things are coming together - exhausts, gear doors, airbrake.
![Album image #33 Album image #33](/albums/img/1/6/8/968168-10105-47-720.jpg)
Several blade antennae added.
![Album image #34 Album image #34](/albums/img/1/6/9/968169-10105-26-720.jpg)
And the rest - the nose probe, PE weather vanes on the windscreen and nose, and the canopies.
![Album image #35 Album image #35](/albums/img/1/7/0/968170-10105-67-720.jpg)
I had to scratchbuild a brace for the center of the front canopy and add the canopy retention cables.
![Album image #36 Album image #36](/albums/img/1/7/1/968171-10105-34-720.jpg)
Enjoy the rest of the photos!
![Album image #37 Album image #37](/albums/img/1/7/2/968172-10105-49-720.jpg)
![Album image #38 Album image #38](/albums/img/1/7/3/968173-10105-38-720.jpg)
![Album image #39 Album image #39](/albums/img/1/7/4/968174-10105-45-720.jpg)
![Album image #40 Album image #40](/albums/img/1/7/5/968175-10105-65-720.jpg)
![Album image #41 Album image #41](/albums/img/1/7/6/968176-10105-44-720.jpg)
![Album image #42 Album image #42](/albums/img/1/7/7/968177-10105-43-720.jpg)
![Album image #43 Album image #43](/albums/img/1/7/8/968178-10105-11-720.jpg)
![Album image #44 Album image #44](/albums/img/1/7/9/968179-10105-73-720.jpg)
![Album image #45 Album image #45](/albums/img/1/8/0/968180-10105-98-720.jpg)
コメント
32 20 February 2021, 15:53
![](/profiles/img/10105-s.jpg)
Thanks Christian. I really like the scheme on the test aircraft and I'm hoping I can do justice to this one. The Sword kit is a typical short run kit, so I'll have to pay attention!
20 February 2021, 16:04
![](/profiles/img/25429-812-s.png)
Cool! A new Bill Gilman build! Obviously I'm in! Enjoy the build (even for a Sword kit...)! 🙂 👍
20 February 2021, 17:59
![](/profiles/img/10105-s.jpg)
The build is moving along - the fuselage is assembled and the seam work finished. I had to scratchbuild a coaming for the front instrument panel as the one supplied by Sword is flat and wider than the fuselage. Someone wasn't paying attention on that one. I added the front HUD using parts from the PE fret and leftover film from a Sea Harrier kit. The front windscreen was dipped in Future prior to attachment to the fuselage, and then faired in with PPP. After this work was done, the cockpit was masked off and the model painted with a grey primer. I'll give that a day or two before I spray an overall white as the base for the Raspberry Ripple scheme. It won't be long now! Cheers, Bill
7 March 2021, 23:11
![](/profiles/img/10105-s.jpg)
Whew, that was a lot of fiddly masking, but the Raspberry Ripple scheme is on the Harrier. Still lots of work to do before I get to the decals, but I like how she's coming together. Cheers, Bill
14 March 2021, 22:35
![](/profiles/img/10105-s.jpg)
Hi mates, the decals have been applied to the VAAC Harrier. I think she looks rather nice in this scheme. I used the decals from Vingtor instead of those from Combat Decals - when comparing both to photos off the real plane it was apparent that the Combat sheet had several inaccuracies. Things like font and line weight, etc. Plus, the roundels on the Combat sheet are all the same size, whereas those on the wings should be larger. Anyway, enjoy the pics. Lots of fiddly stuff left to do - the usual 80% of the work that is left after you've done the first 80%! Cheers, Bill
22 March 2021, 17:30
![](/profiles/img/10105-s.jpg)
The VAAC research Harrier T.4 is finished! Enjoy the photos. Cheers, Bill
1 April 2021, 15:35
![](/profiles/img/10105-s.jpg)
Thanks guys. I spent a lot of time getting the masking right. It's a wonder the tape had any adhesive left since I took it on and off so many times!
2 April 2021, 12:56
Album info
This should be a fun project, and my first Raspberry Ripple British test aircraft in a long time.