F-4EJ Phantom JASDF To F-4EJ Kai Conversion
Without aftermarket parts
- 縮尺:
- 1:32
- 状態:
- 保留
- 制作中:
- February 5, 2014
Ok, the idea here is to do the conversion using what I have in the man cave. A little scratch building and a lot of research. The thing is that, externally, the differences are mostly fairly simple to do. The panel and the wing tips are going to be the biggest challenges
プロジェクト在庫
フルキット
/ja/search.php?q=*&fkMATEID[]=15269&showast=no&fkWORKBENCH[]=WB15269&page=projects&project=7139?
プロジェクトの色
Exterior
Interior
Weathering
Details
フォトアルバム
コメント
9 March 2014, 05:16
![](/profiles/img/15269-818-s.jpg)
My initial intention with this kit was to simply build it completely OOB with no extra detailing and no modifications. The idea was that this would be my re-introduction to the hobby after a lay off of almost 10 years. I would use it to re-learn all those dormant techniques and also to familiarize myself with the kit. Once that was done, I would move on to the F-4E kit, which is essentially the same kit, and unleash my creative juices (having spares from this kit to play with)
YEAH RIGHT!! I got as far as the cockpit when a couple of things happened.
Firstly, I took one look at the bare seats and thought "Those will just not do!" On the last kit I built (Revell 1:32 F-4F), almost 10 years ago, I used the 'foil' from cigarette packs to fashion a set of straps for the seats and I figured I could do the same here. So, off I went to research the seats and straps for an F-4.
This lead me to the second curve in the road - Flory Models web site and forums. After looking at what the guys there were producing, I couldn't bring myself to sticking to a simple OOB build (and TBH, I was getting a little bored with it) so I started doing a little more research on the JASDF Phantoms.
This introduced me to the Kai variant and, after checking up on the changes between the straight EJ and the Kai, I figured that I could build the kit as a Kai without having to buy any aftermarket conversion parts.
And thus, the project was born
9 March 2014, 05:41
![](/profiles/img/15269-818-s.jpg)
BWAHAHAHA Yeah, certainly sounds like it Holger. So on we go 😄
9 March 2014, 18:56
![](/profiles/img/15269-818-s.jpg)
Right, so I've uploaded a couple of shots of the detailing work done to date. What we have so far is:
- OOB Cockpit with the added straps that started it all. Other than those nothing extra has been added (YET 🙂 )
- OOB intakes (DAMN, they're bad) with a little work done on the front of the engine. This included;
- Correcting the fins coming off the bullet at the front (gearbox cover?)
- Removing the molded first stage turbine blades and replacing them with strips of thick foil. This is a project in itself and hopefully I'll remember to photograph it when I do the E next.
- OOB Afterburner cans shaded with green to simulate the corrosion seen on a number of reference photos
- Painted and semi-weathered lower rear fuselage section prior to fitting
- Added styrene strips to the radome for the strengthening strips seen on the Kai
- Added shaped sprue parts to the fin tip as RWR fairings
- Hacked off the top part of the front instrument panel and replaced it with a new shape for the changes to the Kai
- Added two new scopes made from styrene strips and a scratch built front for the new HUD
Next up is the actual HUD and modification to the combing
9 March 2014, 19:48
![](/profiles/img/10105-s.jpg)
Here is my conversion of an F-4F to an F-4EJ Kai in 1:72:
britmodeller.com/for..pic/77880-f-4ej-kai/
10 March 2014, 23:24
![](/profiles/img/15269-818-s.jpg)
Awesome work Bill. I came across that thread while doing my research and I must say I'm very impressed at what you managed to fit in at that scale
11 March 2014, 06:10
![](/profiles/img/10105-s.jpg)
Thanks - it's all the same stuff, just smaller. It helps if you have tiny fingers (which I don't)! 🙂
12 March 2014, 00:19
![](/profiles/img/15269-818-s.jpg)
Right, so it's been a while, thanks to work interfering with life. Managed to get the combing done. In the end, it was a lot easier than I anticipated it would be. I've uploaded some pics of the process for your pleasure and mirth.
21 March 2014, 16:22
![](/profiles/img/15269-818-s.jpg)
Finally got around to the part of the conversion that scared me the most. Most of the things I've done so far are 'reversible' but the changes to the wingtips required cutting away part of the tip and then re-attaching it. In the end, it all worked out fairly well and I'm quite pleased with the results.
Then it was time to assemble the major sub-assemblies. All of these are now glued in so it's almost time for primer and paint 🙂
30 March 2014, 06:27
![](/profiles/img/15269-818-s.jpg)
A little work got done this week. The RWR fairings on the tail were replaced. The new antenna was added to the spine and the canopy was temporarily fitted to mask the cockpit. Then it was on to masking the canopy and the metal sections on the rear. After that, the interior black was sprayed onto the clears. Next up, primer
6 April 2014, 23:03
![](/profiles/img/15269-818-s.jpg)
So, the first coat of primer is on. GAWD this stuff is unforgiving. All those little clean up spots where I thought "That's good enough" sow up. So a little more time needed on cleanup
9 April 2014, 17:35
![](/profiles/img/15269-818-s.jpg)
A large step tonight. Pre-shading and base coats applied. Had a little issue with the correct color for the upper surfaces though. My reference calls for FS36320 as being the closest match. My color chart converts that to XF-22 (RLM Grey) but somehow that just looked way too green. In the end I decided on XF-54 (Dark Sea Grey) as being closest to the color in my reference shots 🙂
Now it's on to post shading which is going to be a LOT of fun, based on my reference photos 🙂
12 April 2014, 22:10
![](/profiles/img/15269-818-s.jpg)
Have had to take a time-out on this one. While fiddling with some post-shading, I managed to pour a colour cup of well thinned paint over one of those wings. So it was time to strip again (the whole thing has been stripped and repainted twice so far). then, while stripping, i managed to break off the outer wing panel. At that point I decided to take a break before something else went wrong and the whole thing ended up in a crumpled heap at the base of a wall 🙂
6 May 2014, 10:02