News Feed
Lorraine Lin
added a new photoalbum.
added a new photoalbum.
126 26 August, 05:51
Robert Podkoński
Wow! This is going to be a true masterpiece... Watching with pleasure and interest!
Wow! This is going to be a true masterpiece... Watching with pleasure and interest!
26 August, 05:55
Robert Podkoński
Makes me wonder, what happens next... You've managed this skeleton kit absolutely perfectly. Chapeau bas!
Makes me wonder, what happens next... You've managed this skeleton kit absolutely perfectly. Chapeau bas!
16 September, 17:10
tyu
Nice, VERY nice! How did you attach the metal parts: glueing or soldering? Very clean build, impressive1
Nice, VERY nice! How did you attach the metal parts: glueing or soldering? Very clean build, impressive1
16 September, 18:07
CaptGPF
Here's a dumb question - how do you keep the paint from chipping off of the PE? I tried spraying Mr Surfacer on it, prior to painting, but it still chips very easily.
Here's a dumb question - how do you keep the paint from chipping off of the PE? I tried spraying Mr Surfacer on it, prior to painting, but it still chips very easily.
16 September, 18:11
Lorraine Lin
Thank you everyone!
@Michael Kohl, this kits are from Jasmine Model. The PEs are great, while the instructions a little bit difficult to understand.
@tyu, I used instant adhesive to glue them together. Some small parts, I used UV glue.
@CaptGPF, I used Mr. Color C series to paint it directly after assembly, keep the paint as thin as possible. But yes, it still chips easily, try not to touch it : )
Thank you everyone!
@Michael Kohl, this kits are from Jasmine Model. The PEs are great, while the instructions a little bit difficult to understand.
@tyu, I used instant adhesive to glue them together. Some small parts, I used UV glue.
@CaptGPF, I used Mr. Color C series to paint it directly after assembly, keep the paint as thin as possible. But yes, it still chips easily, try not to touch it : )
17 September, 01:58
bughunter
Great project!
As I build some Stripdown aircraft already I thought about this one too, but the kit is hard to get here and pricey so it was only an idea.
@CaptGPF You can apply Mr.MetalPrimer from Gunze first. It is a acrylic clear coat which hardens to a thin robust layer even if applied with a brush. I prefer the glass bottle over the rattle can.
SF-242 Mr. Metal Primer, Mr.COLOR , Lacquer, 40ml
Great project!
As I build some Stripdown aircraft already I thought about this one too, but the kit is hard to get here and pricey so it was only an idea.
@CaptGPF You can apply Mr.MetalPrimer from Gunze first. It is a acrylic clear coat which hardens to a thin robust layer even if applied with a brush. I prefer the glass bottle over the rattle can.
SF-242 Mr. Metal Primer, Mr.COLOR , Lacquer, 40ml
17 September, 14:19
Michael Kohl
I have used Mr Metal Primer for a while too with satisfying results. Paint adheres much better.
I have used Mr Metal Primer for a while too with satisfying results. Paint adheres much better.
17 September, 17:31
Michael Kohl
Copper foil plating and going for a french version. This is getting better every day. 🙂
Copper foil plating and going for a french version. This is getting better every day. 🙂
17 September, 17:34
bughunter
There is a newer version with an additional "-R" on the name, I don't know what was changed. I still use the original one.
Tamiya has also a product for this (have not tried it): 204 Metal Primer, Tamiya Gloss, Enamel, 40ml
There is a newer version with an additional "-R" on the name, I don't know what was changed. I still use the original one.
Tamiya has also a product for this (have not tried it): 204 Metal Primer, Tamiya Gloss, Enamel, 40ml
17 September, 19:24
Mr D
Now Lorraine....That is dedication to accuracy 😲.
This is why the Chinese were making Ming vases.. while the rest of the world made clay pots 🤣.
Very talented n clever 💯%
Now Lorraine....That is dedication to accuracy 😲.
This is why the Chinese were making Ming vases.. while the rest of the world made clay pots 🤣.
Very talented n clever 💯%
17 September, 19:55
Lorraine Lin
Thank you Mates!
@skyhiker, It is 0.02mm cooper foil, and it needs to be annealed first (>650 degree C, a cigar lighter or gas cooker is good enough.)
@Micheal and bughunter, thank you for the suggestion, I just ordered Mr. Metal Primer-R.
Thank you Mates!
@skyhiker, It is 0.02mm cooper foil, and it needs to be annealed first (>650 degree C, a cigar lighter or gas cooker is good enough.)
@Micheal and bughunter, thank you for the suggestion, I just ordered Mr. Metal Primer-R.
18 September, 02:30
Lorraine Lin
@bughunter, I just received the new "-R" version. The new label says "improved transparency".
@bughunter, I just received the new "-R" version. The new label says "improved transparency".
19 September, 10:44
Skyhiker
The rivets on the copper look a bit strange because they are not in alignment with the plane's ribs. On a real aircraft wouldn't they be?
The rivets on the copper look a bit strange because they are not in alignment with the plane's ribs. On a real aircraft wouldn't they be?
19 September, 11:07
Lorraine Lin
@skyhiker, thank you for the comment. This is to verify my idea, I am making a new skin. And will try to make the rivets to align with the ribs. Thank you again.
@skyhiker, thank you for the comment. This is to verify my idea, I am making a new skin. And will try to make the rivets to align with the ribs. Thank you again.
19 September, 11:23
bughunter
Thank you for the info!
I hope it still sticks to metal like the original.
Thank you for the info!
I hope it still sticks to metal like the original.
19 September, 11:42
bughunter
Wnat to mention another usage:
The Mr.MetalPrimer can also be used, if the metal should not be painted. It protects the metal surface and prevents tarnishing and oxidation over time.
Wnat to mention another usage:
The Mr.MetalPrimer can also be used, if the metal should not be painted. It protects the metal surface and prevents tarnishing and oxidation over time.
19 September, 11:49
Alexander Grivonev
Additionally to the metal primer you can treat your PE parts with a fiberglass eraser pen beforehand. It cleans the metal from the oxide layers and roughens it up just a tiny amount to create perfect conditions for paint adhesion.
Additionally to the metal primer you can treat your PE parts with a fiberglass eraser pen beforehand. It cleans the metal from the oxide layers and roughens it up just a tiny amount to create perfect conditions for paint adhesion.
19 September, 13:13
CaptGPF
Fantastic progress! It's a pity that the beautiful framing is covered up. Did you press the foil against the kit to get the detailing?
Fantastic progress! It's a pity that the beautiful framing is covered up. Did you press the foil against the kit to get the detailing?
19 September, 15:34
Kesa Tiho
I cant put my finger on it but it seems too perfect. Too good to be true
I cant put my finger on it but it seems too perfect. Too good to be true
19 September, 17:16
Robert Podkoński
If you look closer, you will spot a few imperfections, Kesa (both on the side of the Jasmine model kit, and in the assembly). Notwithstanding, is a fantastic piece of workmanship.
If you look closer, you will spot a few imperfections, Kesa (both on the side of the Jasmine model kit, and in the assembly). Notwithstanding, is a fantastic piece of workmanship.
19 September, 17:26
Alexander Grivonev
I agree with Robert, everything looks authentic and not "doctored". I absolutely do not want to take away from Lorraine's craftsmanship, but there is nothing "too good to be true" about this. Great idea, very well executed, just fantastic craftsmanship. Every step is plausible and well documented and I don't even know how or why you would fake something like this 😄
I agree with Robert, everything looks authentic and not "doctored". I absolutely do not want to take away from Lorraine's craftsmanship, but there is nothing "too good to be true" about this. Great idea, very well executed, just fantastic craftsmanship. Every step is plausible and well documented and I don't even know how or why you would fake something like this 😄
19 September, 17:53
Skyhiker
Well for 300 Euros per kit some people might have to fake it. That's a lot of money.
Well for 300 Euros per kit some people might have to fake it. That's a lot of money.
19 September, 18:14
Alexander Grivonev
but faked HOW is what I wonder about. CGI? Yeah, it looks impressive, but it is still a kit. You cut the parts out, you assemble them and you paint the whole thing, no black magic to it really. It would be much more difficult to "fake" it imho
but faked HOW is what I wonder about. CGI? Yeah, it looks impressive, but it is still a kit. You cut the parts out, you assemble them and you paint the whole thing, no black magic to it really. It would be much more difficult to "fake" it imho
19 September, 18:24
bughunter
@Skyhiker Do you mean 300€ for the whole project, with the Eduard kits and accesories?
The Jasmine Hellcat can be found from below 130€ from aliexpress (ok tax and co needs to be added) and around 150€ in ebay, but not 300! List price at Jasmin own shop is 169$
@Skyhiker Do you mean 300€ for the whole project, with the Eduard kits and accesories?
The Jasmine Hellcat can be found from below 130€ from aliexpress (ok tax and co needs to be added) and around 150€ in ebay, but not 300! List price at Jasmin own shop is 169$
19 September, 18:31
CaptGPF
@Kesa - if you think this is too perfect, wait till you see some of the other posters like Neuling, Mr James, Markus and Jörg (to name a few)- their stiff will also blow your mind!!!! However, Lorraine is definitely the God of PE!!!!!
@Kesa - if you think this is too perfect, wait till you see some of the other posters like Neuling, Mr James, Markus and Jörg (to name a few)- their stiff will also blow your mind!!!! However, Lorraine is definitely the God of PE!!!!!
19 September, 20:09
Kesa Tiho
@alexander grivionev i would say its just a pre built set but because of the WIP photos i cant :/
@alexander grivionev i would say its just a pre built set but because of the WIP photos i cant :/
19 September, 20:34
Kesa Tiho
I didnt mean my comment as an insult to her and her ability to build, paint etc builds. I just found her build oddly good
I didnt mean my comment as an insult to her and her ability to build, paint etc builds. I just found her build oddly good
19 September, 20:36
Mr D
Kesa, sometimes things can come across wrong way, so it's best to keep comment positive or just hold back... Everyone including yourself has nice experience here.
The site is a community forum and not competition ground.
There are people who are starting out ...brush painting over sticky fingerprint's.
Also there are amazingly talented artists like Lorraine here.
Everybody work n project is important to them, it's the enjoyment of the hobby above all, as you know for the nice work you have created yourself... Hopefully subject will move on now..🤣
Kesa, sometimes things can come across wrong way, so it's best to keep comment positive or just hold back... Everyone including yourself has nice experience here.
The site is a community forum and not competition ground.
There are people who are starting out ...brush painting over sticky fingerprint's.
Also there are amazingly talented artists like Lorraine here.
Everybody work n project is important to them, it's the enjoyment of the hobby above all, as you know for the nice work you have created yourself... Hopefully subject will move on now..🤣
19 September, 22:08
Lorraine Lin
I believe that the friends in this community enjoy the process of building models, the satisfaction of removing the painting masks, and the interaction and sharing with mates here. Rather than showing off a pre-built model. I joined this community a little over a month ago, and I've seen many excellent works here, learned a lot of building techniques, and most importantly, had the opportunity to communicate with mates from all over the world. I feel connected with everyone, and I will continue to complete this project. Thank you for all your comments and support.
I believe that the friends in this community enjoy the process of building models, the satisfaction of removing the painting masks, and the interaction and sharing with mates here. Rather than showing off a pre-built model. I joined this community a little over a month ago, and I've seen many excellent works here, learned a lot of building techniques, and most importantly, had the opportunity to communicate with mates from all over the world. I feel connected with everyone, and I will continue to complete this project. Thank you for all your comments and support.
20 September, 08:36
Lorraine Lin
@CaptGPF, yes, I press the copper foil against the kits to get the shape and details. I don't know "rubbing" is the right word the describe the process. And I plan to cover half of the fuselage. So it is called "cut away": )
@CaptGPF, yes, I press the copper foil against the kits to get the shape and details. I don't know "rubbing" is the right word the describe the process. And I plan to cover half of the fuselage. So it is called "cut away": )
20 September, 08:54
Lorraine Lin
I applied Mr. Metal Primer-R as mates suggested here, it works well. The only thing is the surface is a little bit sticky even after 12 hrs. I guess this is how it prevents the painting from chipping.
I applied Mr. Metal Primer-R as mates suggested here, it works well. The only thing is the surface is a little bit sticky even after 12 hrs. I guess this is how it prevents the painting from chipping.
20 September, 09:14
Kesa Tiho
@lorraine i can see, i feel honoured to have one of my builds be followed by a skillful builder like you
@lorraine i can see, i feel honoured to have one of my builds be followed by a skillful builder like you
20 September, 09:48
CaptGPF
@Kesa - I don't think anyone took your post as inflammatory or starting a war - it's nice having conversations like this - and I think it's the best compliment once can receive when someone says "it looks too good". Be yourself!
@Kesa - I don't think anyone took your post as inflammatory or starting a war - it's nice having conversations like this - and I think it's the best compliment once can receive when someone says "it looks too good". Be yourself!
20 September, 14:23
Mr D
Wander if the 🧸 bear gets sticky paws gluing all that PE together .... they make a talented team there pair..🤣
Coming on really well Lorraine.... interesting to see a different technique 🐻✌️
Wander if the 🧸 bear gets sticky paws gluing all that PE together .... they make a talented team there pair..🤣
Coming on really well Lorraine.... interesting to see a different technique 🐻✌️
20 September, 20:44
Ben M
Very creative modeling. I enjoy seeing someone build something to this high of a standard as well as trying new things.
Very creative modeling. I enjoy seeing someone build something to this high of a standard as well as trying new things.
21 September, 04:35
Lorraine Lin
Thank you Mates!
@Mr D, haha, actually she is a lovely fox, Lina Bell. My favorite friend in Disney Land 😄 I built a helicopter for her.
[img1]
Thank you Mates!
@Mr D, haha, actually she is a lovely fox, Lina Bell. My favorite friend in Disney Land 😄 I built a helicopter for her.
[img1]
21 September, 11:57
Mr D
😁 your right a 🦊 fox got the pointy ears..fox's need to get about too 🤣
Really good...👍👍
😁 your right a 🦊 fox got the pointy ears..fox's need to get about too 🤣
Really good...👍👍
21 September, 15:15
Mr D
Propeller looking 👍 nice.
Care you planning to cover it all ??
Or have some of the model skeletal for a display-cutaway effect??
Propeller looking 👍 nice.
Care you planning to cover it all ??
Or have some of the model skeletal for a display-cutaway effect??
28 September, 14:07
Lorraine Lin
Thank you Mate!
Robert and Mr D, I will not cover it all, maybe some part of the wing. Will leave it as cutaway effect.
Thank you Mate!
Robert and Mr D, I will not cover it all, maybe some part of the wing. Will leave it as cutaway effect.
28 September, 14:59
Greg Baker
This MUST be left at least partially as a cutaway. Would be a crime to cover up all that intricate detail!
This MUST be left at least partially as a cutaway. Would be a crime to cover up all that intricate detail!
29 September, 16:21
Lorraine Lin
Haha Greg, will not cover it all. Actually the skin is also removable as I attached it to the fuselage with TAMIYA craft bond.
Haha Greg, will not cover it all. Actually the skin is also removable as I attached it to the fuselage with TAMIYA craft bond.
30 September, 05:31
Mr D
Excellent, clever and Educational, Exhibition worthy work.
Been a joy to follow 😃🦊
✌️👍👍👍
Excellent, clever and Educational, Exhibition worthy work.
Been a joy to follow 😃🦊
✌️👍👍👍
1 October, 18:13
Robert Podkoński
Awesome indeed! Fantastic models and photos. You're a master modeller, Lorraine!
Awesome indeed! Fantastic models and photos. You're a master modeller, Lorraine!
2 October, 07:31
Desert Marlin
Awesome work! The contrast with a traditional kit makes the reality very clear!
Awesome work! The contrast with a traditional kit makes the reality very clear!
2 October, 21:47
Tom Beighley
added a new photoalbum.
added a new photoalbum.
17 images
In ProgressNew: 3 October, 04:45 1:35
Did a layer of hairspray then JA Green. Chipped the paint with brush and wooden dowl. Good to see the kit in green finally.
Project: T-62 ERA
14 10 December 2023, 05:12
Christian
added a new photoalbum.
added a new photoalbum.
12 images
MH-60K 160th SOAR1:48
I‘ve done one of these 15 years ago. Painted by brush and out of box. Overall fit was ok but not overwhelming. So this t...
Project: Sikorsky MH-60K Blackhawk 160th SOAR
27 19 January 2023, 20:49
Treehugger
Looks like fun in 1:48. I considered creating an iterior for a Blackhawk 1:72 kit, but though it was all too small.
Looks like fun in 1:48. I considered creating an iterior for a Blackhawk 1:72 kit, but though it was all too small.
18 February 2023, 16:00
Christian
I really enjoy the process of dry fitting and reshaping. Can't imagine doing this in 1:72 🙈
I'm going to add a few rivets from HGW models too. So there is a long way to go….
I really enjoy the process of dry fitting and reshaping. Can't imagine doing this in 1:72 🙈
I'm going to add a few rivets from HGW models too. So there is a long way to go….
18 February 2023, 17:02
Christian
added a new photoalbum.
added a new photoalbum.
18 17 January 2022, 09:27
Christian
Thank you! The water bottle is from a Black Dog kit. I'm going to build one or two Ammo can's an add a M16 and a M60 as well. There will be two M134's for the doorgunner positions and two rocket pods as well.
Thank you! The water bottle is from a Black Dog kit. I'm going to build one or two Ammo can's an add a M16 and a M60 as well. There will be two M134's for the doorgunner positions and two rocket pods as well.
20 January 2022, 10:00
Sergej I
Would prefer an M60 at the door, but minigun is also legit 👍 🙂
Great stuff, thanks for sharing, looking forward for more.
Would prefer an M60 at the door, but minigun is also legit 👍 🙂
Great stuff, thanks for sharing, looking forward for more.
20 January 2022, 12:48
Christian
Thank you Dariusz, but there is absolute no progress since January 🥵
We're too busy by completing our new home.
But I can't wait to get back to modeling 🤩
Thank you Dariusz, but there is absolute no progress since January 🥵
We're too busy by completing our new home.
But I can't wait to get back to modeling 🤩
30 August 2022, 20:41
Mr D
Hi Christian, looking good, bit more room for detail with a helicopter,
I just purchased the Zvezda mi-8 in 1:72.
I want to do a Chernobyl diorama in the winter, with Mi-8 dropping sand and boron on the damaged reactor.. they sell little 3d printed Chernobyl power stations on eBay.
Do you prepare the surface before gluing on PE ? Or just S-glue direct to plastic.?
Thanks for uploading... nice project 😀👍👍
Hi Christian, looking good, bit more room for detail with a helicopter,
I just purchased the Zvezda mi-8 in 1:72.
I want to do a Chernobyl diorama in the winter, with Mi-8 dropping sand and boron on the damaged reactor.. they sell little 3d printed Chernobyl power stations on eBay.
Do you prepare the surface before gluing on PE ? Or just S-glue direct to plastic.?
Thanks for uploading... nice project 😀👍👍
20 August, 19:44
Christian
@Mr D Thank you man! I'm only degreasing the PE with brake assembly cleaner before gluing. The initial idea was to do a Vietnam Era diorama, with HH-53, AH-1 and UH-1. But that idea requires time to do modelling, so at the moment, sadly, there is no room for that. Maybe later that year.
@Cristian A, you're welcome Mate ✌️
@Mr D Thank you man! I'm only degreasing the PE with brake assembly cleaner before gluing. The initial idea was to do a Vietnam Era diorama, with HH-53, AH-1 and UH-1. But that idea requires time to do modelling, so at the moment, sadly, there is no room for that. Maybe later that year.
@Cristian A, you're welcome Mate ✌️
22 August, 04:45
Kesa Tiho
added a new photoalbum.
added a new photoalbum.
2 images
Gonna take this one slowly New: 3 October, 04:34 1:48
So i decided to take a small break from this build just because it was exhausting to build, dont know why. Im gonna get ...
Project: 500D tow helicopter
1 October, 12:57
Doubtingmango
added a new photoalbum.
added a new photoalbum.
24 29 August, 17:57
Doubtingmango
So I just finished this little Italian job. The decals came out with a lot of the edges showing, which then got a lot worse when I added some washes. I used Microset on the decals, and then sealed them with Tamiya semi-gloss before the washes, but it actually looks like the washes got under the decals. Any thoughts?
So I just finished this little Italian job. The decals came out with a lot of the edges showing, which then got a lot worse when I added some washes. I used Microset on the decals, and then sealed them with Tamiya semi-gloss before the washes, but it actually looks like the washes got under the decals. Any thoughts?
29 August, 18:04
Bogicevic Vladimir
It looks like you haven't spray gloss coat before you applied decals. Or decals didn't set well. There are two solutions. One is lacquer thinner. Put the thinner with fine brush in dots over the place where you have silvering. Thinner should destroy the film. If it raises paint under, just leave it, it will settle back. Important thing here is that, once you applied thinner, you shouldn't touch decal for something like 20 minutes, at least. Second way is mix of sugar and water, half - half. You make a hole with a needle on the decal, than you put mix on the top. It should enter in the space between decal and paint and, when drayed, make a gloss film in between them which will act as a gloss under the decal. Wipe excess mix with wet cloath and you are done.
It looks like you haven't spray gloss coat before you applied decals. Or decals didn't set well. There are two solutions. One is lacquer thinner. Put the thinner with fine brush in dots over the place where you have silvering. Thinner should destroy the film. If it raises paint under, just leave it, it will settle back. Important thing here is that, once you applied thinner, you shouldn't touch decal for something like 20 minutes, at least. Second way is mix of sugar and water, half - half. You make a hole with a needle on the decal, than you put mix on the top. It should enter in the space between decal and paint and, when drayed, make a gloss film in between them which will act as a gloss under the decal. Wipe excess mix with wet cloath and you are done.
29 August, 18:28
Mr James
How annoying. I've never heard of the sugar water trick from Bogicevic. I'll be interested if this works. If the thinner, sugar trick fails, what else can you do but use a scalpel to cut around them, since you've sealed it,
How annoying. I've never heard of the sugar water trick from Bogicevic. I'll be interested if this works. If the thinner, sugar trick fails, what else can you do but use a scalpel to cut around them, since you've sealed it,
29 August, 19:05
Doubtingmango
Thanks mates! I believe Bogicevic is right. I think I did fail to gloss coat before the decals. I think I'll try the sugar water first
Thanks mates! I believe Bogicevic is right. I think I did fail to gloss coat before the decals. I think I'll try the sugar water first
30 August, 10:42
Bogicevic Vladimir
Ok. There are few small tings I should add then. Heat the water first, when hot it will disolve sugar beter and apply it while it's still warm, it will have more viscosity. Make small hole or slice with modeling knife, put few drops of mix on the top and let it dry. You will see emidiatly if it's penatrating. When dry, wipe carefully excess mix with moist cloth. Repeat where neaded. I know it sounds ridiculous, but it worked for me many times.
Ok. There are few small tings I should add then. Heat the water first, when hot it will disolve sugar beter and apply it while it's still warm, it will have more viscosity. Make small hole or slice with modeling knife, put few drops of mix on the top and let it dry. You will see emidiatly if it's penatrating. When dry, wipe carefully excess mix with moist cloth. Repeat where neaded. I know it sounds ridiculous, but it worked for me many times.
30 August, 11:11
Doubtingmango
Thanks Bogicevic! I'll give it a shot. If it doesn't work I'll try the lacquer thinner technique. I love this site!
Thanks Bogicevic! I'll give it a shot. If it doesn't work I'll try the lacquer thinner technique. I love this site!
30 August, 11:26
Mark Sherwood
Where the *uck's this been hiding. Very nice build Mr Mango and I hope the decal solution from Bogicevic work's out🤞
Where the *uck's this been hiding. Very nice build Mr Mango and I hope the decal solution from Bogicevic work's out🤞
31 August, 21:31
Doubtingmango
Thanks Mark! So I punched some holes in the decals and applied the warm sugar water, but unfortunately it did not seem to make a noticeable difference. I decided my best shot was to just grab the scalpel and remove the decals, which was very easy. Bogicevic said the solution would get under the decals! I have successfully applied new decals, and my little Italian job is now base-worthy. New pics to come.
Thanks Mark! So I punched some holes in the decals and applied the warm sugar water, but unfortunately it did not seem to make a noticeable difference. I decided my best shot was to just grab the scalpel and remove the decals, which was very easy. Bogicevic said the solution would get under the decals! I have successfully applied new decals, and my little Italian job is now base-worthy. New pics to come.
31 August, 23:14
Bogicevic Vladimir
Well, you find a solution, which is the most important thing. I can not know why something that worked for me many times does not work for you in this case. Maybe that what I think is silvering is residual glue from decal paper. Who knows... Anyway, good luck with your project.
Well, you find a solution, which is the most important thing. I can not know why something that worked for me many times does not work for you in this case. Maybe that what I think is silvering is residual glue from decal paper. Who knows... Anyway, good luck with your project.
31 August, 23:56
John
All's well that ends well. 👍 Mango, your builds have me hankering to do some armor but I still have commitments to do a couple more a/c. When I do get a chance, part of me wants to start small with a Pz IV, but another part says go for broke and do a Maus!
All's well that ends well. 👍 Mango, your builds have me hankering to do some armor but I still have commitments to do a couple more a/c. When I do get a chance, part of me wants to start small with a Pz IV, but another part says go for broke and do a Maus!
1 September, 01:33
Doubtingmango
As promised, new pics of the new decals have been added, along with pics of the work I have started on the base. Once again, thank you for the help Bogicevic!
As promised, new pics of the new decals have been added, along with pics of the work I have started on the base. Once again, thank you for the help Bogicevic!
12 September, 15:01
Doubtingmango
More work on the base. Just need to paint up the base and add foliage
More work on the base. Just need to paint up the base and add foliage
13 September, 22:54
prelude BCh
marked this item as on order
marked this item as on order
Bell P-39 & Curtiss P-40 in French Service
Berna Decals 1:32
BD 32-34 201X New tool Multi-topic (1!!)3 October, 04:26
Jorge Kwek
owns this item
owns this item
Hanger support series
Mobile Worker No.2 5 weapon variants Dragon Flight Model Hut 1:100
2023 New parts 3 October, 04:05
Jorge Kwek
owns this item
owns this item
Hanger support series
Mobile Worker No.2 5 weapon variants Dragon Flight Model Hut 1:100
2023 New parts 3 October, 04:05
Jorge Kwek
owns this item
owns this item
Hanger support series
Mobile Worker No.1 5 weapon variants Dragon Flight Model Hut 1:100
2023 New tool 3 October, 04:02
Jorge Kwek
owns this item
owns this item
Hanger support series
Mobile Worker No.1 5 weapon variants Dragon Flight Model Hut 1:100
2023 New tool 3 October, 04:02
/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=en
35
35
/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo