News Feed
Zsolt Czegleadded a new photoalbum.
22 images
The making the base (Step by step) 
1:72
10th step:
The stones are painted with shades of grey of acrylic paints
Project: German Superheavy Tank Maus
38 22 January 2023, 17:56
Tom B.Nice 👍 This really reminds me of some photos of Maus V1 being tested with a dummy turret and ending up immersed into mud to half it´s hull height. The picture can be seen in Tank Encyclopedia´s article on the Maus
17 February 2023, 12:37
strds90added a new photoalbum.
2 21 December, 07:05
Kesa TihoNice progress so far, following
Also, do you recommend the kit? Im looking to buy it one day
21 December, 12:30
Marcin Dudekadded a new photoalbum.
6 25 November, 19:04
Mr DNice little project 👍 think l recognise this kit is it the 1:144 ??
I did the mini hobby models version.
Good luck with it 😃
29 November, 17:31
Marcin DudekI would like to ask for Your advice, mates. I have problem with two parts. First is the exhaust - this part was to big to fit in the fuselage. I left it for later hoping I will think a way to deal with it. Maybe I will manager to cut the ending (just the part with grooves) so it will fit the fuselage this way. Second is the clear part. It is absolutely smooth and as if the planes canopy was composed of one part. I am afraid my skills are not enough to draw the lines myself and I am thinking about leaving it as it is, not painted.
1 11 December, 15:27
Spanjaardwith a bit of making tape, you can have a couple of lines. in that scale, they do not need to be anything thicker 😉
you can do it before you glue the canopy
1 11 December, 15:46
Robert PodkońskiMarcin. If you will position masking tape carefully you can paint very thin lines (primer first, then paint) - like here:
Homebuilt | Album by podkon (1:72)
1 11 December, 17:45
Mr DHi Marcin 👋 yes the canopy is just one clear piece due to the scale, l didn't bother painting one on my model.
Yes your right about the exhaust..... My one didn't fit in the opening at the end.
I glued it just to the back and didn't push it inside fuselage.... I think that is how it should be.
I will take a photo of my one now and add it to my IAR-80 album for you to look at.
Good luck 👍👍
11 December, 19:46
Spanjaardanother solution is a decal of the right color cut on stripes and placed in the right place. if you do not have one of the right color, paint a spare one (very thin), cut it in stripes and then place it
2 11 December, 21:46
Mr DThe exhaust on the Starfighter is quite long out the back to get away from tail.
The glue will soften it into place a little and if you have any gaping you can fill it with filler, paint, or carefully with super glue.
Gently Gently with the fragile canopy.
Looking good you doing a nice job.
😃👍
12 December, 10:03
Marcin DudekThanks for the advice Mr D. Today I tried Roberts method with the canopy. It went quite good, considering my skills 😅
2 12 December, 19:26
Mr DGood for you Marcin 👍 it looks good.
Remember that poli glue can fog up canopy glass, lf you fix with poli best hold your canopy with a bit of blue-tak and just add a few drops with a pin, alot of people use PVA as it's bit safer.
👍👍
12 December, 19:33
Marcin DudekPhase one of remodeling the exhaust - I drilled a hole to make it look more realistic
14 December, 18:21
Mr DThat's better job, l painted a black circle, but this will look much better.
This Starfighter was one of my early builds.
Good luck on next steps 👍👍
14 December, 19:00
Marcin DudekThanks Mr D. I manager to cut the exhaust with a mini grinder. The result is not perfect but once painted it looks ok.
15 December, 13:57
Mr DShould be a better job, l looked at some photos of Starfighter and the exhaust is shorter and inward like you cut it.
Are you going to paint a bit of black on the inlet cone's ??
For detail work l found that "Nail liner brushes" are the best, they are for beauty parlours to paint pictures on women's nails, but incredibly fine for detail model work.
I get the 6mm ones. AliExpress, eBay ect.
Enjoyed watching the build 👍👍
16 December, 19:15
Mr DLooks good 👍, l like the antenna you made for the nose,
Those brushes look 👍 good nice fine tip... Post a link if you get chance.
👍
18 December, 19:31
Marcin Dudekshare.temu.com/gyaYf6EDcMA
They look a little bit different in real, the "0" brushes are very similar, most probably they have the same size. They seem ok so far.
19 December, 16:10
Jennifer Franklinadded a new photoalbum.
11 14 December, 18:27
Mr DNice project 👍👍
Good luck with it, what is the part count on this one ?
Like that they gave some track included 👍
16 December, 17:35
Jennifer FranklinWelcome, Villiers de Vos, Michael, Nicolas, and Mr D! The part count is slightly over 80. Compared to the Memphis Belle, a level 5 model, this is a level 3. I plan to focus on technique with this one, which will be the real challenge after the B-17.
16 December, 17:47
Martin OostromBe careful with all the thin parts around the wheels. They are fragile and need to be installed in the right sequence. It is easy to take a wrong turn there.
2 16 December, 18:16
Jennifer FranklinYeah, I saw a Big Boy in a museum while working in Tooele, Utah. Remarkable engine, never forgot it.
18 December, 03:28
Michael KohlOh Ben, linking this picture is mean. Where shall get Jennifer all those handwheels from?! 😜
1 19 December, 09:05
Jennifer FranklinBen, that is both remarkable and daunting. Michael, you are right; I will never create all those handwheels.
19 December, 13:42
Ben MI like how the crew had no labels to guide them; they just had to know what each hand wheel did.
1 19 December, 14:44
Jennifer FranklinDave, I probably shouldn't have put the arc support under the covered bridge, but there is one like it in Quebec, and the Waterloo bridge in England is somewhat similar. Let's call it artistic liberty.
21 December, 03:27
Jennifer FranklinIt's a truss arch bridge, which is rare but has been built in the past.
21 December, 12:07
Sergio Ordonezadded a new photoalbum.
15 11 November, 03:25
Sergio OrdonezNot very difficulty, Freak. Just using small pewter plate strips. Not very cheap, but at least, 25 € Will last for the rest of the century. I use them also for any strap for hand weapons, back pack belts, prses, etc. You can find them in any shop specialized in game miniatures.(Warhammer and such).
1 7 December, 21:16
Sergio OrdonezWell, now we are in the frightening moent of heavy sanding fuselage parts that are not fixing properly...
2 13 December, 17:05
Sergio OrdonezHi, Mr D: well, not as good as I expected. The model is really bad. The plastic is heavy affected by glue and fixing is terrible. Nevertheless, I hope having It done before Christmas.
15 December, 23:14
Grzegorz Siutaadded a new photoalbum.
13 images
1970 1/2 Chevy® Camaro Z28®
1:25
Project: 1970 1/2 Chevy® Camaro Z28®
21 December, 11:42
Markadded a new photoalbum.
14 18 November, 20:38
Max OttenHow is the fit of the wing fold? I tried it on an Academy Bearcat (because I already had that built and didn't want another build) but the Academy wing is too thin and now the top surface of the port wing has split and I'm stuck.
19 November, 13:19
Chris T. Anadded a new photoalbum.
42 images
McDonell Douglas F-4J Phantom II VMFA-232 "Red Devils"
1:72
Took some new pictures.
103 17 March 2021, 16:35
Spanjaardlooking really good. good call in not using that decal. although the decals are top quality (if they are as good as in the bigger 1/48), it looks great painted. cans looking really good too.
19 March 2021, 21:10
Chris T. AnThank you. And yes, the decal quality is indeed very good. I used the 2 walkway decals on the wings because of the printed "walkway" letters. Will be fun to go on with all the other decals in the next step.
19 March 2021, 21:36
Konrad -One of my favorite Marines markings🙂!
Awesome model, paintwork and pictures?
25 March 2021, 13:44
Spanjaardwhat a beautiful result. wonderful weathering, just spot on in my opinion (reminds me that i need to add a bit of grime to mine...). it can pass as 1/48
25 March 2021, 13:58
Chris T. AnThank you all. I'm happy that you like it. By the way, I noticed 2 mistakes, now that I have made all the final pictures:
1. I forgot to remove 2 small mask triangles at the canopy.
2. I forgot to make the tires a bit flat.
I have corrected that already but I don't feel like doing new photos.😉
26 March 2021, 09:11
NeulingSuper clean and detailed model! 👍 And I overlooked the mask triangles ............
26 March 2021, 09:29
AlexanderWeathering turned out awesome, as did the paintjob. 👍👍 Also like the presentation with the mirroring surface - great work!
13 April 2021, 15:20
Chris T. AnThanks for all your positiv words. So I made one new picture with both mistakes corrected. Must be enough. 😉
I tried the mirroring presentation for the first time and it is easy to do: just put the object on a simple glass screen from a picture frame and choose a flat angle when taking the photos.
13 April 2021, 20:20
CaptGPFExcellent Phantom! Weathering is not too light - not too heavy = just right!
11 February, 06:31
Juergen Klinglhuberadded a new photoalbum.
42 9 December 2023, 14:58
Juergen KlinglhuberHi - was off a few days - so welcome and thx for your interest mates!
16 January, 06:30
Juergen KlinglhuberHave the "September Pops" decals in hand now - time to bring this one back to the bench soon.
26 March, 10:16
Juergen KlinglhuberAs the the Austrian Thyphoons whizzed past this Kansan recendl and theSchopf tractor has towed them back in the hangar, I can now put this bird back on the work-bench. Primer application was done last weekend.
11 November, 16:46
Juergen KlinglhuberNicolas, Lukasz & Cuajete - thx. The pink is great - I had a weak moment to go for a "what if" livery, because I liked it pink too.
That moment is gone - moved forward with application of white paint. The ultimate pink --> to red test will follow soon. 😉
29 November, 09:33
Juergen KlinglhuberNow the red paint is applied. Prepairing the bird now for the decals,.....
7 December, 08:00
Jennifer FranklinThe red paint looks sharp; it's very nice and the lines are incredibly clean.
21 December, 11:33
Jungwon Leeadded a new photoalbum.
15 20 December, 01:16
NeilI too have built this old kit (but in grey) and a few more recent builds in metal too, so appreciate the work. You've done a fantastic job the metal finish is beautiful 👍
21 December, 11:04
J35JExcellent paint work, the weathering and hydraulic fluid staining in particular (pic 18) is really great. What a gem!👍🏻
21 December, 11:35
Guy Rumpadded a new photoalbum.
54 18 February, 17:02
Guy RumpThe next project will be this old tool Italeri Horsa glider. My first glider, so here's hoping it will be a good experience. 🙂
18 February, 17:05
Guy RumpMade a start today. First thing to do was decide if a MK.1 or Mk.2 was to be built. I've decided on the Mk.1 so I had to cut out the parts as shown in the photo. 🙂
Welcome along Robert, Nicolas & J35J, nice to have you with me. 👍
Many thanks mates for your interest and likes Robert P, Neil, Chris & J35J. 👍
7 March, 16:10
Guy RumpSeats and flooring now installed inside fuselage. 🙂
Welcome along for the ride Finn. 👍
Many thanks for your interest and like Franck D. 👍
17 March, 16:24
Guy RumpToday I finally completed the cockpit and fitted the cargo door into the fuselage. 🙂
Many thanks mates for your interest and likes Rui, Tim v D, Duster_d & Sukhoi 242. 👍
23 May, 15:58
Guy RumpCockpit, fuselage & tailplane now altogether. Tail was difficult to get together, Added 5g of weight to the nose and 15g of weight to the front of the fuselage. 🙂
Many thanks mate for your interest and like Andrew B. 👍
24 May, 15:02
Guy RumpWings now together. I intend painting the wings before attaching to the fuselage. Hurricane added to show the size of the glider. 🙂
Many thanks mates for your interest and likes Alberto M & airjuneau. 👍
25 May, 15:22
Guy RumpDid the upperside of the wings with Vallejo Model Air Dark Earth and Dark Green. Invasion stripes to be added next. 🙂
Many thanks mate for your interest and like Pietro DA. 👍
27 May, 15:48
Neil PatrickI built this about 20 years ago Guy as a gift for a WW2 Horsa pilot who was a friend of my wife's family. He'd flown Horsas into Normandy and Arnhem. He loved the model and it sat in his living room for the rest of his days. It's a nice kit as I recall.
28 May, 10:21
Guy RumpInvasion stripes are now on the wings. Next is to start painting the invasion stripes on the fuselage. 🙂
@ Neil, it is quite a nice kit considering its age. The fact that you gifted a Horsa model to an actual Horsa pilot veteran is something that must have been hugely gratifying. 👍
Many thanks mates for your interest and likes Villiers DV, Sebastien C, Neil P & 2 other mates. 👍
16 June, 13:55
Guy RumpFuselage painted Dark Earth, BS Dark Green and black including invasion stripes. Gap is for where the wings are added. 🙂
Many thanks mate for your interest and like Chris. 👍
23 June, 15:31
Guy RumpWings attached, decals & undercarriage added. 🙂
Many thanks mate for your interest and like Dom S. 👍
30 June, 16:37
Guy RumpFinally completed, my first glider done. 🙂
Many thanks mates for your interest and likes William J, Mirko R, Cliff K & Finn. 👍
7 July, 15:56
Guy RumpMany thanks Nicolas & J35J for your kind comments, I really appreciate them! 👍
Many thanks mates for your interest and likes Treehugger, Nicolas, Gary V & Cuajete. 👍
14 July, 16:23
Guy RumpMany thanks for your very kind comments Robert, Stephan & Neuling. I appreciate them greatly! 👍
Many thanks mates for your interest and likes Vassk9, Villiers DV, Mona, Juskifo, NordMito, Stephen F & Mark B. 👍
21 July, 15:18
Guy RumpMany thanks for your kind comments Istvan & Mr D, it is greatly appreciated. 👍
@Mr D, yes the glider is in the D-Day invasion colours with identification stripes. 👍
Many thanks mates for your interest and likes Istvan S, Skyhiker & Mr D. 👍
22 September, 15:06
Guy RumpI have a Mk.1 in my stash David, I think that will have to do otherwise she who must be obeyed will not be happy! 🙂
Many thanks mate for your interest and like Durand S. 👍
7 October, 16:08
Stephen LesleyWow, this one brings back memories. As a teenager I loved looking through the Italeri catalogues and marvel at the paint jobs on the models. Most of them were painted by Francois Verlinden and I remember thinking I will never make models like that!
22 November, 01:25
Guy RumpYes, the Horsa was always a model I wanted to build and as a teenager never got one. As well as the newer tools, it's always nice to build older models that we wanted when we were young. 👍
Many thanks mates for your interest and likes Curatorm & Stephen L. 👍
25 November, 17:14
Eddy Marshalladded a new photoalbum.
18 images
Takom Mark IV Female - Construction 
1:35
Pretty much ready to bond all 3 together then continue detailing with the small pieces...
Project: Takom Mark IV Female...
11 14 December, 13:35
TreehuggerOh, wow. Interesting idea with that Dremel and a toothpick. Must try this sometime myself with some 1:35 tank wheels.
1 16 December, 12:35
Eddy MarshallHey Treehugger... Yeah its pretty nifty... Dremel and a preloved scalpel blade is a cheap life hack in place of a lathe... Just keep it on the lowest speed tho and use the blade as a scraper to gently rempve the seam...Don't use sandpaper though... You'll melt the wheel to your fingers otherwise... lol... Oh and the larger the diameter the more likely you'll lose an eye...! Lol
16 December, 12:51
TreehuggerI have some lesser electrical drills I can try use to lower the speed and use a metal file, should be safer I think than trying to mix that with some xacto blade.
1 16 December, 19:17
Eddy MarshallCheers Rob... Got them together... Must've been your good will mate... Lol... Happy modelling...
19 December, 14:14
Christian Abrahamadded a new photoalbum.
37 images
IJN Hatsushimo 
1:700
Project: IJN Hatsushimo Operation Ten-Ichi-Go
2+ 26 20 November, 19:22
Mark SherwoodI've got to say Christian, I take my hat off to you ship builders, you produce great work, your latest build is coming along 👍 me personally, I don't have the patience. 🤘🥸🤟
18 December, 17:08
Christian AbrahamThanks guys. Yes patience helps. But when the mast schmales only some tea helps 🤣
1 18 December, 18:05
Maksim Kurmazadded a new photoalbum.
13 images
MiG-29 SMT Russian VVS "25 red", 1:72 Zvezda 
1:72
Project: MiG-29SMT
2+ 1 21 December, 10:59
David Goodchildadded a new photoalbum.
9 images
Curtiss P40 Fantasy scheme and airbrush practice
These are the pictures that I used as a base for my fantasy scheme. I knew the blue, red and white tail would be hard t...
1 21 December, 10:13
TrezThis must be an early Aprils Fools day. The industry must running out of ideas
20 December, 17:43
Nik WatsonThat's what keeps us building German WWII hardware, the variety and peculiarities are many & varied.
20 December, 19:38
TrezAnd useless. I've never seen this contraption before and I believe most Germans wouldn't be seen dead in such a thing - literally
1 20 December, 21:57
Jan PetersThis vehicle was used in training, in order to master Panzer tactics.
It is a real vehicle, not a fictional brainfart.
1 21 December, 07:46
TrezA paper model sounds about right. It's a ridiculous release. It never saw action and is worse than a what if. Will you be doing a diorama with Wehrmacht soldiers holding up cardboard tank profiles? I think it will be much to your liking
reddit.com/r/History.._a_dummy_tank_to_be/
21 December, 09:29
Jan PetersNo-one is forcing you to buy it Trez😂
It is however a machine what has been used, and in some numbers too, and I think some of us are happy to see one done in styrene.
21 December, 09:59
TrezMy friend, where do you get these assumptions from? Just because I don't like a kit doesn't mean that I beleive I am being coerced into buying it.
Are you going to do that diorama then? With the soldiers holding up cardboard tanks? You could do one of the guys running to represent really fast panzers! lol
21 December, 10:12
Alain Brshladded a new photoalbum.
4 28 November, 10:21
BozoBonjour,
Brillante démonstration de nuance de gris. Construction irréprochable. On dirait un vrai.
Mais dieu qu'ils sont ternes nos Rafaux.
21 December, 09:44
Rafael Mozetoadded a new photoalbum.
8 2 June, 04:51
George WilliamsThat's a great looking Corvette, Rafael, all your extra work has really paid off.
1 21 December, 09:32
Mr Dadded a new photoalbum.
4 images
4D 1:144 SU-30 MK 
1:144
Made a start, the push together joins are very prominent so will address those.
I use super glue as it is probably ABS ...
Project: SU-30 MK 1:144 4D snap kit
Scratchbuilt
4 14 December, 21:33
Jennifer FranklinThis is a smart way to practice techniques. Good luck with the pre-shading and exhaust effects.
21 December, 09:00
Martin Oostromadded a new photoalbum.
31 30 September 2023, 11:09
BozzerI'm in, just to see how that trailer goes! That's some ambitious project, right there, brother!
30 September 2023, 21:11
Martin OostromMy son printed these parts a while ago and they were in the way on my bench. So I'll be working on the cargo first and then we'll see where it goes from there truck and trailer wise.
1 October 2023, 14:44
BozzerI couldn't help wonder, what that thing is? I'm guessing that it's some kind of silo? Probably fictional, but not uncommon for unusual things to be carried around the country. I'm definitely all for unusual loads. They keep our hobby, that little bit more interesting.
2 October 2023, 08:28
Martin OostromToo bad is will me a one colour beast.
I might try some preshading to see how that turns out…
8 October 2023, 09:15
Martin OostromI had some primer left over from the Merc and the Lambo, so why not use it on this one?
And then I couldn't help myself.
2 December 2023, 18:47
Martin OostromStuck in traffic. There's a slow moving Beetle in front of an on old Australian Truck holding things up.
25 October, 05:56
BozzerOddly enough, I have a road at the back of my cave, just like that? The chassis for my Australian Truck, is currently the test bed, for my resin cabs! It does look good, with double hump fenders though 😉
25 October, 17:15
Martin OostromThe Aussie truck is done and the Beetles paint is curing.
Now building a new bed for the trailer.
13 November, 20:23
Martin OostromI do hope that the Mrs will bring some food and drink every now and then. It's going to take a while Bozzer.
Decision time. Do I make my own cross members or do I glue the new bed on top of the old one?
15 November, 17:44
BozzerThat's a tough call mate.
Personally, I'd go for it and build my own. However, I'd check the time, by building one, and see how long it takes me? Then I'd multiply that, by the amount of cross members, plus the rails and end pieces.
I'd do this because, my time is limited and nobody really looks at the bottom of a trailer?
That being said, I have plans to build some very interesting trailers, in the future, all from scratch!
If time is on your side, go for it. If not, straight on top of the old, works too.
1 15 November, 23:38
Martin OostromThe kit bed has 'just' 21 crossmembers. I think I'll pass on recreating those.
16 November, 10:37
Martin OostromAt ESM last Saturday, I met this guy Mark Spiers. He is supplying me with another set of axles and the wheels and such. At a reasonable price, I can get this setup look a bit more 'heavy transport'.
25 November, 21:05
BozzerOn the Idea picture, your image shows smaller wheels on the trailer, than the truck. Obviously those are offset by the gooseneck. Options for wheels should be available by 3D printing? They'd definitely be steel wheels. Revell have a Heavy Duty Trailer with a beavertail. I can measure those wheels and tyres, if you want that information? That's definitely the way I'd go, for a heavy trailer like that 👍
25 November, 21:38
Martin Oostrom💡 Yoe mean this one? Heavy Duty Trailer (Revell 07533, 1:25)
The one that's in my stash? And the size of the lower half is just big enough for my cargo? Because I got it out and measured it?
You're a genius Bozzer. It would rearrange my projects a bit, but that's been done before.
1 26 November, 06:29
BozzerLol, exactly that one, my mate!
May I suggest you make a mould of the wheels, and cast your own? There's enough knowledge in this forum, to help you? But a smart man with a 3D printer, could also help you out 😉
26 November, 08:21
Martin OostromThe parts from Mark Spier arrived in the post today. Just like we agreed, with a couple of figurines tossed in.
Mark is a fellow modeller, who doesn't want to let parts go to waste. He has a collection of leftover parts. You can contact him on his email marxpier0512@gmail.com. He just might have the parts you need. Just give it a try.
Full disclosure: I don't get a cent from whatever he charges.
27 November, 13:34
Martin OostromSo the switch is made to the Revell Heavy Duty trailer. I got punished right away, more ejection marks than parts. Guess what I did in the last few hours?
27 November, 15:57
Martin OostromAnother hour, another question. I removed some wiring/piping. First I intended to replace it with 0.5mm brass rod. But it looks a bit thin. I also have 0.8mm lead wire. More to size, but a bit bendy.
What to use? And what to simulate the clasps with?
27 November, 19:54
bughunterCopper! It is harder then lead. You can glow it to get it more soft.
Foil from a whine bottle, not all are usable. Often the have two alu with clear plastic in between. I often use the removed outer blacked alu.
27 November, 20:05
BozzerBloody hell, I've created a monster!
I agree with bugsy, but you might also have some black plastic tubing, hidden in your other kits? Usually AMT and Revell. See if that works for you?
27 November, 21:07
Martin OostromBrass sheet is on its way, with a selection of different rod sizes too.
Welcome to the party Yngve, normally you would be a bit late as the trailer was 2/3 done with prepping. But thanks to mr Bozzer here, I had to start all over. On a filler, scraped, sander kit no less. A monster he created indeed.
1 2 December, 20:25
Peter HardyA "Mammoth" project Martin! I have to admit you are making one heck of a mess so you must be having fun! Looking forward to learning with the brass or copper!
3 December, 11:09
Martin OostromThis kit needs a lot of work. The fit is decent to good. But there are so many mold lines. Each part needs cutting, filing, scraping and sanding. Slow and tedious.
Bozzer! You made me do this! 😉
5 December, 07:12
GoldmanImpressive work Martin.
I have found that the best solution to the ejector pin marks Italeri and Revell like so much is CA glue (superglue) mixed with Talcum Powder. Make sure you have "real" talcum powder that contains Talc and not corn starch (apparently, recently Jonshon replaced the Talc in its products with corn starch so check the ingredients on the package). For CA I use the cheap Loctite from the supermarket. The Talc make the CA easier to sand.
I also use Dspiae self adhesive sanding strips (280 and 800 grits) with their aluminum boards to get a flat area:
Alumimium Alloy Sanding Boar..2+2pcs) (DSPIAE AS-RD15, No)
Pre-cut self adhesive Sandpa..00grain (DSPIAE MSP-400, No)
5 December, 09:11
bughunter... or fill the ejector pin marks with round discs of styrene, made with punch&die. It has the advantage of same material and no shrinking.
5 December, 09:14
Martin OostromThanks for the tips mates.
Today I spent 4 hours replacing the awful wood grain on the ramps with some tread plates. It took so long because I hade to carve out enough space in a solid part of the ramps
8 December, 15:43
BozzerLooks like time well spent, to me? Wouldn't it be great, if they had a router or some kind of milling machine, for our hobby? Something I might have a play with, in the summer.
This trailer can't be far away from primer, now? Or does Mr Martin, have a few more tricks up his sleeve? 😉
8 December, 23:40
Peter HardyQuite impressive "carving" old mate. But, why is there always a but with me and trucks, what goes underneath?
8 December, 23:43
Martin OostromI'm waiting on some rods and pipes to arrive. I need those for wiring and piping. And I'm trying to find some spare air tanks
My thumb tried to paint the parts prematurely, after a knife took an unplanned detour. A band aid or two took care of that.
1 9 December, 05:30
Kyle DeHartI really like tread plate addition. That's was a good idea. Hopefully your thumb didn't get it too badly!!
9 December, 06:28
Spanjaard@Bozzer, you may mean MF 70 (Proxxon 27110, No) . there is even the CNC version, but it is more for metal than plastic, in my opinion
9 December, 08:01
bughunterVery clean work Martin 👍
Spanjaard is right about the mill. The rotation speed can be set between 5000 and 20000, which is too high for plastic.
9 December, 08:20
GoldmanIf you already have a Proxxon or similar grinder you can just get a drill stand (MB200) and the sliding table (KT70) and save some money. Will probably not be as accurate as the MF70 but I think it will be good enough for plastic. I actually considered buying this combination (I already have Proxxon FBS240 grinder) but after considering the cost and, more importantly, how often I will use this setup I decided not to.
9 December, 08:30
Ben MIf you do as Goldman suggests, you can use one of those analog speed controls. I have one for my dremel that goes all the way down to zero rpm.
10 December, 01:45
BozzerYou guys have given me some food for thought. I can see myself getting busy, after the holidays. 😉
10 December, 06:18
Bill NewcomerCool project. Following. I too am working on a trailer. Much smaller project though.
12 December, 04:55
Jennifer FranklinThis is ambitious! At least your son has a 3D printer. Are you seriously thinking of getting one yourself? They have come down in price a great deal. The Bambu Lab A1 is an excellent printer and is much more reasonably priced than they used to be.
21 December, 08:57
Moaskeadded a new photoalbum.
10 images
Mirage 2000-5F - Opération Harmattan
1:48
A bit of a rim left, but the fit is perfect and so is the shape
Project: Mirage 2000-5F - Opération Harmattan
5 14 December, 20:41
Verdant Farmeradded a new photoalbum.
21 December, 08:17
Sy Baradded a new photoalbum.
7 15 December, 21:35
Sy BarThis is my first foray into the world of Panzers and my series of Panzerkampfwagen builds from I to VI.
While I like all forms of AVF doing the tracks on tanks puts me off, hopefully this series will get me over that hurdle 🤞
17 December, 07:25
Mark SherwoodLooks interesting, in on this. The exhaust and muffler 👌 very nice. 🤟🥸🤘
18 December, 17:37
Sy Bar#Mark, #Guy cheers and welcome.
These tracks show the standard of modern kits, they worked a dream and the 1:1 plans are a great idea. I know some will say you should have working tracks always but if you don't have working suspension then they are a fiddly time consuming waste of effort. That's not to say correct droop is not the goal and Tamiya here show that can be done in a much easier way - top marks!
19 December, 08:38
Sy BarLooking a bit rough but after decal application, pin wash and flat coat hopefully it'll come together, if not then there is weathering to hide a multitude of sins 🤪 ( the biggest help to modeler of AVF has over air 🤣)
1 21 December, 08:19
/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=en
35
35
/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo