News Feed
Tim Jacobs
started this item
started this item
United Nations Cosmo Force BBY-01
Space Battleship Yamato 2199Bandai 1:500
0186230 (862303) 2013 New tool 2 November, 19:51
Snake Plissken
I'm only guessing at the 1957 and 1958 dates here but I wanted them on the timeline in some sort of order. The main point however was to showcase the amazing box art.
I'm only guessing at the 1957 and 1958 dates here but I wanted them on the timeline in some sort of order. The main point however was to showcase the amazing box art.
2 November, 19:50
bughunter
added a new photoalbum.
added a new photoalbum.
7 images
WIP of a blue-yellow biplaneNew: 2 November, 19:38 1:48
After removing some structure on the kit wing the tank fits and can be glued later in place.
Project: Stearman PT-17 Kaydet
17 31 October, 18:27
bughunter
Welcome Robert! Which one you want to take, the yellow or a green one? 😉
Please do not miss the project description, for the _VERY_ important reason for this project!
Welcome Robert! Which one you want to take, the yellow or a green one? 😉
Please do not miss the project description, for the _VERY_ important reason for this project!
31 October, 18:55
Ludvík Kružík
I'll sit down too. If I'm not mistaken, one green seat is still open. 😉
I'll sit down too. If I'm not mistaken, one green seat is still open. 😉
31 October, 22:40
bughunter
Hello my friends! A warm welcome to each and every one of you!
Working on the parts of this kit can be considered bodily harm! The bright yellow hurts your eyes and you can't see any details or damaged areas that need work. I would have preferred a more common gray!
Hello my friends! A warm welcome to each and every one of you!
Working on the parts of this kit can be considered bodily harm! The bright yellow hurts your eyes and you can't see any details or damaged areas that need work. I would have preferred a more common gray!
1 November, 16:49
Kenneth
Hallo Frank, the set with lap belts only could be intended for the US Navy variant of the Stearman, the N2S. Until US entry in WW2, US Navy aircraft mostly did not have shoulder belts. I read this in a review of a 1/32 Vought Kingfisher while looking for seatbelts and wondering about the same thing for my 1/32 Revell/ICM N2S Stearman kit.
Hallo Frank, the set with lap belts only could be intended for the US Navy variant of the Stearman, the N2S. Until US entry in WW2, US Navy aircraft mostly did not have shoulder belts. I read this in a review of a 1/32 Vought Kingfisher while looking for seatbelts and wondering about the same thing for my 1/32 Revell/ICM N2S Stearman kit.
2 November, 08:55
bughunter
Welcome! Thanks Kenneth! That makes sense, as the kit offers also a yellow Navy plane with red stripes. Luckily my wife want it blue-yellow. All the pictures I found shows also shoulder belts, but that was mostly still flying machines and I guess the shoulder belts was added later.
I had already downloaded the ICM manual as an additional reference and looked at reviews because of an oddity on the upper wing. More on this later.
Welcome! Thanks Kenneth! That makes sense, as the kit offers also a yellow Navy plane with red stripes. Luckily my wife want it blue-yellow. All the pictures I found shows also shoulder belts, but that was mostly still flying machines and I guess the shoulder belts was added later.
I had already downloaded the ICM manual as an additional reference and looked at reviews because of an oddity on the upper wing. More on this later.
2 November, 16:24
bughunter
Because I was still in soldering mode after the seats, I immediately turned my attention to the tank on the upper wing. I like the look of the metal fuel tank now.
Because I was still in soldering mode after the seats, I immediately turned my attention to the tank on the upper wing. I like the look of the metal fuel tank now.
2 November, 19:49
Simon SW
owns this item
owns this item
WWII
German IF8 Infantry Cart (too large for 1/72 scale, more like 28mm) Valiant Miniatures 1:72
VM005 2011 New tool 2 November, 19:47
Bill Dawson
owns this item
owns this item
Grumman
HF-2 Albatross Family - Landing Gear for SOVA-M Scale Aircraft Conversions 1:72
72193 2022 New tool 2 November, 19:46
Ronan
added a new photoalbum.
added a new photoalbum.
77 17 August, 16:09
NLAWScametovisit
At this rate, Ronan will solve the gearbox issues before the USMC!! Following!
At this rate, Ronan will solve the gearbox issues before the USMC!! Following!
19 August, 15:06
Ronan
Many thanks, mates 😉
It should be complete in the next few days if all goes well
Many thanks, mates 😉
It should be complete in the next few days if all goes well
1 November, 09:54
Ronan
Thanks ALec ;
i use the Prince August black acrylic paint heavily diluted with water.
Thanks ALec ;
i use the Prince August black acrylic paint heavily diluted with water.
1 November, 12:41
Tim Wang
added a new photoalbum.
added a new photoalbum.
9 2 November, 17:29
Treehugger
Nice camo.
Q: Would one want a 0.2 mm airbrush for making such a pattern?
Nice camo.
Q: Would one want a 0.2 mm airbrush for making such a pattern?
2 November, 19:44
Ferenc Sarka
added a new photoalbum.
added a new photoalbum.
25 27 June, 20:48
Ferenc Sarka
I made the revell version earlier. A little bit better but neither of them is issue free. The revell unreachable on the market, just the italeri version. Good luck for your project.
I made the revell version earlier. A little bit better but neither of them is issue free. The revell unreachable on the market, just the italeri version. Good luck for your project.
5 July, 20:53
Thomas Kolb
I am definitely following this build. The Italeri kit is not an easy build (and it is a model of the very first A-version of the Gripen, not the C-version used by Hungary), but it is the only one that exists today. I am however sure you will do a splendid job!
I am definitely following this build. The Italeri kit is not an easy build (and it is a model of the very first A-version of the Gripen, not the C-version used by Hungary), but it is the only one that exists today. I am however sure you will do a splendid job!
6 July, 21:15
Michael Kohl
added a new photoalbum.
added a new photoalbum.
35 images
Two polish aerobatic TS-11 Iskras1:72
Finally both pilots are strapped in. Time to tackle the canopies.
Project: PZL TS-11 Iskra aerobatic team
51 7 December 2022, 10:54
Maciej Bellos
I have to watch also! Could you show us a photo of the decals? When were the decals produced?
I have to watch also! Could you show us a photo of the decals? When were the decals produced?
7 December 2022, 14:35
Michael Kohl
My friends. I am really happy to have you around as I was sincerely hoping that this build will arouse the interest of the three of you.
Maciej, are you referring to the kits decals or the ones from RSmodelle. Concering the latter, I cannot tell you, as I have not received them yet.
My friends. I am really happy to have you around as I was sincerely hoping that this build will arouse the interest of the three of you.
Maciej, are you referring to the kits decals or the ones from RSmodelle. Concering the latter, I cannot tell you, as I have not received them yet.
7 December 2022, 16:13
Maciej Bellos
I have the kit, courtesy of Robert.
I was referring to the BSModele decals, as masking the scheme was really challenging and, ehm, painful!
I have the kit, courtesy of Robert.
I was referring to the BSModele decals, as masking the scheme was really challenging and, ehm, painful!
7 December 2022, 16:30
Michael Kohl
Here us the link to the decals at their homepage:
[img1]
Looking at them, I am afraid some decent masking is still ahead of me.
Here us the link to the decals at their homepage:
[img1]
Looking at them, I am afraid some decent masking is still ahead of me.
7 December 2022, 16:44
Robert Podkoński
Good job so far, Michael! (you can find some walkaround photos in my albums, if you wish to 😉 )
Good job so far, Michael! (you can find some walkaround photos in my albums, if you wish to 😉 )
11 December 2022, 16:34
Michael Kohl
Wellcome Bernd and Guy.
Robert, thank you for the invitation. I already helped myself. 🙂
And thanks folks for your likes. Motivates even further.
Wellcome Bernd and Guy.
Robert, thank you for the invitation. I already helped myself. 🙂
And thanks folks for your likes. Motivates even further.
11 December 2022, 19:33
Łukasz Gliński
Progressing very well. I hope the pilots don't mind being polished 😛
Progressing very well. I hope the pilots don't mind being polished 😛
16 December 2022, 12:27
Michael Kohl
Thanks mates for your interest and the likes. Hopefully I will be able to progress this build soon.
Thanks mates for your interest and the likes. Hopefully I will be able to progress this build soon.
14 February 2023, 17:17
Isaac Kite
Taking a seat. The Iskra is a sexy plane, no idea why the Delfin won that contract. Let me guess. Political elimination? Regardless, looking forward to watching this develop.
Taking a seat. The Iskra is a sexy plane, no idea why the Delfin won that contract. Let me guess. Political elimination? Regardless, looking forward to watching this develop.
6 October 2023, 14:57
Michael Kohl
Funny. Just the evening before your comment, Isaac, I dusted them planes and finished the cockpits. Let's move on.
Funny. Just the evening before your comment, Isaac, I dusted them planes and finished the cockpits. Let's move on.
6 October 2023, 17:44
Michael Kohl
Took them out of the shelf another time. Quite a bit of sanding had to be done. Particular the inner rear area of the wing where the box of the intakes tapers towards the trailing edge of the wing is much to thick in the kit. A bit of elbow grease was required there.
A fresh comparison with a machine in flight revealed some more issues I adressed. So, some more filling and sanding. Now I gotta wait till my trusted Mr. Hobby primer sets properly.
Took them out of the shelf another time. Quite a bit of sanding had to be done. Particular the inner rear area of the wing where the box of the intakes tapers towards the trailing edge of the wing is much to thick in the kit. A bit of elbow grease was required there.
A fresh comparison with a machine in flight revealed some more issues I adressed. So, some more filling and sanding. Now I gotta wait till my trusted Mr. Hobby primer sets properly.
24 October, 11:27
Alec K
Taking a very, very belated seat. Great project, had a few chuckles reading your captions 😄
Taking a very, very belated seat. Great project, had a few chuckles reading your captions 😄
24 October, 17:38
Mr D
At least all the preflight checks will be done with German pilots 🤣 just keep them away from Starfighter be ok 😁.
Looking good nice fun project... Cockpit is great,
I use "Nail liner brushes" for cockpit n detail work... there used in beauty parlours for Painting pictures on nails.... There quite cheap and much more accurate than most fine paint brushes out there. 6 or 7mm best.
Good luck with next steps 😃👍
At least all the preflight checks will be done with German pilots 🤣 just keep them away from Starfighter be ok 😁.
Looking good nice fun project... Cockpit is great,
I use "Nail liner brushes" for cockpit n detail work... there used in beauty parlours for Painting pictures on nails.... There quite cheap and much more accurate than most fine paint brushes out there. 6 or 7mm best.
Good luck with next steps 😃👍
24 October, 20:26
Michael Kohl
Hi Mr D and Alec K. Welcome.
@Alec: I deliberately take loooong brakes with this project so thay even the slowest out there can catch up 😉
@Mr D: I will look out for them nail liner brusher and see if they might serve my needs. I have tons of brushes but 90% of my hand painting is done with Winsor & Newton No. 7 Size 2. Hurts when you buy them, but they are of an incredible quality.
Hi Mr D and Alec K. Welcome.
@Alec: I deliberately take loooong brakes with this project so thay even the slowest out there can catch up 😉
@Mr D: I will look out for them nail liner brusher and see if they might serve my needs. I have tons of brushes but 90% of my hand painting is done with Winsor & Newton No. 7 Size 2. Hurts when you buy them, but they are of an incredible quality.
28 October, 17:19
Michael Kohl
The main filling and sanding job done on one of the birds. A handful of details will be added before the final prepaint sanding. The canopy needs some work too. The frame of it is too coarse and will be sanded (almost) flush. Apart from that are there fit issues at the windshield that need to be addressed.
The main filling and sanding job done on one of the birds. A handful of details will be added before the final prepaint sanding. The canopy needs some work too. The frame of it is too coarse and will be sanded (almost) flush. Apart from that are there fit issues at the windshield that need to be addressed.
28 October, 17:24
André Knippenberg
added a new photoalbum.
added a new photoalbum.
8 images
F-104G Starfighter "Tigermeet 1978"New: 2 November, 16:44 1:72
Project: F-104G Starfighter "Tigermeet 1978"
6 2 November, 16:42
K Tai
wants this item
wants this item
Ford GT LM GTE 2017 Le Mans 24 hours #66/#67/#68/#69
Model Factory Hiro (MFH) 1:12
K-619 2017 New tool 2 November, 19:42
Dmitry Stropalov
added a new photoalbum.
added a new photoalbum.
32 1 November, 23:06
Nik Watson
Absolutely superb job, an interesting aircraft I really must get one for my stash.
Absolutely superb job, an interesting aircraft I really must get one for my stash.
2 November, 09:26
Mike Goodman
"A complicated linkage of reduction gears, ball bearings, couplings and shafts resulted in the P-39 coming to life like no other airplane when started. With the self-control of an excited puppy, the Airacobra would shake, shiver and shimmy as if genuinely atwitter at the prospect of going flying." (Warplanes to Alaska, Blake W. Smith)
"A complicated linkage of reduction gears, ball bearings, couplings and shafts resulted in the P-39 coming to life like no other airplane when started. With the self-control of an excited puppy, the Airacobra would shake, shiver and shimmy as if genuinely atwitter at the prospect of going flying." (Warplanes to Alaska, Blake W. Smith)
2 November, 18:09
/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
search-solr.php?lang=en
35
35
/search.php?q=*&page=newsfeed&fkSECTION[]=Newsfeed
35
todo