News Feed

Doubtingmango
Watching

Mr D
Thanks, Appreciate the interest, lm reality new to the hobby about 14 months, finding my way with techniques.
Weathering n panel lines need more learning.
The IAR-80 was decent price from HB and liked the paint scheme...bit different
👍👍

J35J
I'm in!

Mr D
Thanks J35.
Nice to have the interest, HB instructions bit weak!
They said to paint interior charcoal black like on the FW-190.
But l checked n the Romanian lAR interior was grey/blue.
Engine building next 6 parts deal.
Cheers 😃👍

Miguel Vaquero
Looking good mate. Following!!

Mr D
Good to have you along Miguel, engine n wings next,
A small amount of the wing is seen through bottom of cockpit, the HB instructions didn't mention painting it first!!
But the fit of the model be ok so far.
👍👍

Robert Podkoński
Joining the party!

Mr D
Thanks Robert, good to have you on board 👋😀👍

Miguel Vaquero
Love the idea of filling with acrylic, never thought about it. Does it hold well though time?

Mr D
Hi, Yes lve used it alot and holds up really well , l find the fillers a bit messy and more trouble than it's worth on small gaps.
You do need to allow overnight drying with it for best sanding results.
😀👍

Doubtingmango
Brilliant! The putty really can create a mess with finely molded details

NLAWScametovisit
This is extremely clever!!!

Mr D
Yes it has a habit of filling in panel lines n bits not necessary!!
This technique is same as using alot of paint to fill a gap or high build primer ect...just becomes part of the paint layer as it acrylic too.
But it's not for big gaps!! As there is a bit of shrinking overnight.
Be onto marking rivets next step after sanding... Then need to make choices on open or closed canopy???

Kesa Tiho
If anyone dare look away from that then every romanian within a 20 km radius will undo all your progress like a bunch of wolves eating a sheep

Landlubber Mike
Looking really good Mr D!

Mr D
Thanks Mike 👋😀👍.
Ive got the canopy on now, HB do nice clear glass, so I'm having a closed cockpit,
So bit of masking to do there next.
Ive got X2 builds on the go at min.
All the best 👍👍

Miguel Vaquero
I got to get myself a chrome pen. The result on those details look awesome

Mr D
Thanks Miguel, the pen needs a good shake prior to use , if it awkward area you can pump some out n use brush...but work fast.
Best to put a clear over next day as it's bit delicate.

Alexander Perov
Do not forget that the mast of the antenna passes through the windshield and is very clearly visible. This model may come in handy in my albums

Mr D
Ok thanks Alexander, HB didnt make the Mast installation very clear, the show it just glued on the top, will be very weak!! I've seen one build and it's come away!!
I'm going to use steel rod.
👍👍

Guy Rump
Following with interest! 👍

Mr D
Thanks Guy.... good to have you around 😃👍

Nicolas
Following

Skyhiker
I'm in!

Dave Flitton
Watching!!

Skyhiker
Please let us know when you upload new photos. I don't want to miss anything.

Ogre-Trombone
I found some time to work on these kits, so here are some new photos. Thanks for following!

Nicolas
The instruction isn't mentioning the stand at all. As the torpedo is under the COG I would try to fix it to the torpedo.
Very nice progres so far. 👍

Ogre-Trombone
Leaning that way, Nicolas. I don't like it, but that's probably what I'll need to do.

Mr D
Nice model 👌
Was the Devastator similar to the Dauntless??
Like the subject....will be watching 😃👍

Ogre-Trombone
@Mr D, the Devastator was a pre-War torpedo bomber that was one of the most advanced aircraft of its time. Unfortunately. it was already obsolete at the start of the war. It was slow and underpowered, and early-War tactics left its crews extremely vulnerable.

Skyhiker
The Douglas TBD Devastator, was the U.S. Navy's main torpedo bomber. It was introduced in 1935, but was obsolete by 1939. They were replaced with the Grumman TBF Avenger.

Mr D
Thanks for the info
Ogre & Skyhiker 👍👍
I didn't know much about them, the pre-war yellow wings are smart scheme 👌

Mid Franconian
Great project!

Guy Rump
Looking great, following. 👍

Casey Beckett
Great idea, the foam/tape /white glue - I'm stealing this!

Mr D
Both coming along really nicely now, the flap lines look a lot better now.
Looking like all the build updates.
Good luck with next steps 👌😁👍👍

Ogre-Trombone
Thanks, Mr D. I'm trying not to let the asymmetry bother me on the black-primed model. I wish I'd made a template or measured them instead of trying to follow the old panel lines. Still, I'm glad I made the effort.

Pure improvisation, Casey! It seems to be holding up so far. I want to do open or partially-opened canopies, so it didn't make sense to glue them in place, which is what I usually would have done.

Ogre-Trombone
It's very hot and dry where I am right now, and the paint isn't responding the way I'd like. I'll have to come back when conditions are better.

Mr D
Your doing a 👍 job, All the hard work will pay off, nice project 👍👍

Mr D
Nice choice of kit, like the way your clock's/ instruments have turned out.
Was each clock individual??
Good stuff, my next kit is a Tamiya, was good quality.
Thanks for uploading 👍👍

John
Thanks Mr D. You can't go wrong with a Tamiya, at least in terms of fit. Sometimes their details get simplified and supposedly a few kits have accuracy issues, but for assembly they are great. Had to do this one after the A-20G since it was so painfully fussy to fit together. This is a nice change!

I thought about punching out each instrument individually but it's so small it would have driven me mad. Fortunately, the decal is sized perfectly to the panel so if you align it carefully, it turns out fine.

This kit doesn't specifically say it, but you can do both open and closed engine panel. Since the engine fits with pins and poly caps, you can change them out, which I intend to do. It's a nice touch and the kit is fairly cheap. Pick one up if you haven't already.

Mark Sherwood
I agree,after a frustrating build. You can go to a Tamiya kit and get back to what the hobby is about. . . Enjoyment, satisfaction, reasonable accuracy and a decent finish. Good interior John, looks like the 162 is on track as I would expect from your good self. 🤘🥸🤟🥸👍

Mr D
Brilliant thanks for the Advice John..😃👍👍. Appreciate it.
Good luck with rest of build ...nice subject 👌

Doubtingmango
Fantastic work on the instruments! Nothing like a nice Tamiya kit to keep the blood pressure down to acceptable levels

bughunter
Yep, nice work 👍

Sebastian Meyner
👍 Following 🙂

Mr D
Like the engine n wiring work ... coming along nicely 👌👍

Mr James
A really good modeller at work. Lovely work so far

John
Thanks Mr James. This is a fun little build. These recent Tamiyas are a treat to put together.

Rui S
Great work allround 👍

Mr D
Very nice 👌 some nice shading showing .
Smart n interesting model 👍👍💯%

Mark Sherwood
That's a nice representation of the162. I do like that engine, 'ar la The Fast Show ' BRILLIANT!

Alberto
It looks great 👍. Very interesting pre-shading

John
Thanks for the comments and likes everyone 👍

Doubtingmango
Great idea and beautiful execution!

John
Thanks Doubtingmango! 👍

Łukasz Gliński
Very neat, love that plane 👍

Neuling
Clean and careful work on this interesting aircraft. And good photography!